Replies: 4 comments 2 replies
-
|
The Flow configuration is corrupted is still happening. This morning the Timelapse etc. did not run. The recent trouble with the external SSD seems to not be solved. I may have to do a clean install. |
Beta Was this translation helpful? Give feedback.
-
The issue with corrupted flows has been fixed in the next release, due soon however this does not sound like the same issue. It sounds like you are using an external SSD, presumably on a pi4? Can you describe the issue you are having with the ssd as if there are problems writing to it then the flows will get corrupted Alex |
Beta Was this translation helpful? Give feedback.
-
|
Timelapse, keograms, and startrails aren't done via the Flow modules. Look in /var/log/allsky.log for error message starting at this morning's daytime. |
Beta Was this translation helpful? Give feedback.
-
|
If you attach |
Beta Was this translation helpful? Give feedback.
-
|
The problem was the SD Card was full. For some reason, the change in the variables.sh file I made to make AllSky write to an external USB Drive was turned off and the original to write to the SD Card was turned on. I did not do this. This filled the SD Card and the AllSky scripts stopped working. |
Beta Was this translation helpful? Give feedback.
-
|
Upgrading Allsky installs a new variables.sh file. If you want to change anything in that file, put the changes in a new file called |
Beta Was this translation helpful? Give feedback.
-
The Overlays disappeared. The Module Manager puts up this Dialog, "The Flow configuration is corrupted. Please use the reset Flow button to revert the flow to the installation default or the Restore button to restore the last good configuration". Clicking the Dialog's OK Button then clicking the reset icon brings back the Overlays but they disappear moments later. Resetting the RPi does not solve the problem.
Beta Was this translation helpful? Give feedback.
All reactions