In order to build Unstrung you have to have these libraries installed on your device
- boost
- libnl3
- libpcap
- libusb
If you use any debian based distro(ex. raspbian) you can install them just by typing
sudo apt-get install libboost-all-dev libnl-3-dev libpcap-dev \
libusb-dev libusb-1.0-0-dev libcmocka-dev cmake
The script install-apt-deps.sh can be used to get the most up-to-date set of packages. On x86 it will attempt to install gcc-multilib, and install packages for both 32-bit and 64-bit compilations.
(it takes quite a long time on unpacking libboost1.55-dev,do not kill the process)
Clone the source repository
git clone https://github.com/AnimaGUS-minerva/unstrung.git
cd unstrung/
make
In order to create a DODAG you have to run sunshine. You'll want to have it announce a prefix. If you have a spare /64 which is routed to you, use it. You can use a ULA as well. Shown below is the documentation prefix.
cd programms/sunshine
./sunshine -i lowpan0 -I 35 \
--prefix 2000:db8:1234:abcd::/64 \
--dagid 2000:db8:1234::1 -W 10000 --verbose --stderr -R 1 -m
ATT: there are reports that a different sequence of arguments may cause a SEGV. If that occurs, please open an issue.
| Argument | explanation |
|---|---|
| --instanceid or -I | the ID of your dodag instance.Just put any number |
| --prefix or -p | the network prefix that your root will advertise.More information about it here:http://unique-local-ipv6.com/ |
| --dagid or -G | the unique id of your DODAG.Put the ipv6 of your root in hex format |
| --rank or -R | the rank of your node on the DODAG |
| --interval or -W | The period between sending DIO's |
| --nomulticast or -m | Disable multicast in DIO's |
| --verbose | Turn on logging |
| --stder | Log to stderr |