Skip to content

Latest commit

 

History

History
27 lines (19 loc) · 1.51 KB

README.md

File metadata and controls

27 lines (19 loc) · 1.51 KB
Raw

CoverUI for OpenMower

License: MIT Discord

About

This repository contains the firmware files required to use the mowers CoverUI (ButtonBoard).

Variants

  1. Custom DIY CoverUI-PCB which replaces the stock (top-cover) PCB.
    Please check the Cover UI board assembly instructions for more detailed infos.
    Also available in Vermut's Shop (as part of his 'Upgrade Kit')

  2. Stock YardForce CoverUI for the following models:

    1. Classic 500 (STM32 & GD32 MCU)
    2. Classic 500B (STM32 & GD32 MCU)
    3. SA/SC/NX-Type (10 Buttons, 12 LEDs), PCB labeled with RM-ECOW-V1.0.0 (STM32 MCU)
    4. SA/SC/NX-Type (9 Buttons, 11 LEDs), PCB labeled with RM-ECOW-V1.1.0 (STM32 & GD32 MCU)
    5. NX100i (18 Buttons, 3 LEDs, 256*64 Pixel LC-Display), PCB labeled with RM-EC3-V1.1 (STM32 MCU)
    6. SAxPro (Rev6) 6 Buttons 240*128 Pixel LC-Display (STM32 MCU)

    For this, you need to solder some cables and flash a modified firmware to it.
    Please check the detailed Stock CoverUI Readme (as you've also the option to use your stock 'hall', 'stop' and 'rain' cables).

License

Distributed under the MIT License. See LICENSE for more information.