diff --git a/core/tabs/system-setup/fedora/fedora-btrfs-assistant.sh b/core/tabs/system-setup/fedora/fedora-btrfs-assistant.sh
new file mode 100644
index 000000000..1d5dc2ff1
--- /dev/null
+++ b/core/tabs/system-setup/fedora/fedora-btrfs-assistant.sh
@@ -0,0 +1,168 @@
+#!/bin/sh -e
+
+. ../../common-script.sh
+
+# This script automates the installation and root and home snapshot configuration of Snapper and installs Grub-Btrfs on Fedora.
+# Also installs python3-dnf-plugin-snapper package for automatic snapshots after dnf commands.
+
+# Install Btrfs-Assistant/snapper and dependencies
+installBtrfsStack() {
+    if ! command_exists btrfs-assistant; then
+        printf "%b\n" "${YELLOW}==========================================${RC}"
+        printf "%b\n" "${YELLOW}Installing Btrfs Assistant with snapper...${RC}"
+        printf "%b\n" "${YELLOW}==========================================${RC}"
+        case "$PACKAGER" in
+            dnf)
+                "$ESCALATION_TOOL" "$PACKAGER" install -y btrfs-assistant python3-dnf-plugin-snapper
+                ;;
+            *)
+                printf "%b\n" "${RED}Unsupported package manager: ""$PACKAGER""${RC}"
+                exit 1
+                ;;
+        esac
+    else
+        printf "%b\n" "${GREEN}Btrfs Assistant is already installed.${RC}"
+    fi
+}
+
+# Create first snapper config for root and home and create new manual snapshots
+configureSnapper() {
+    printf "%b\n" "${YELLOW}===========================================================================${RC}"
+    printf "%b\n" "${YELLOW}Creating snapper root(/) and /home config and taking the first snapshots...${RC}"
+    printf "%b\n" "${YELLOW}===========================================================================${RC}"
+    "$ESCALATION_TOOL" snapper -c home create-config /home && "$ESCALATION_TOOL" snapper -c home create --description "First home Snapshot"
+    "$ESCALATION_TOOL" snapper -c root create-config / && "$ESCALATION_TOOL" snapper -c root create --description "First root Snapshot"
+    printf "%b\n" "${YELLOW}Updating timeline settings...${RC}"
+    # Modifyling default timeline root config
+    "$ESCALATION_TOOL" sed -i'' '
+        s/^TIMELINE_LIMIT_HOURLY="[^"]*"/TIMELINE_LIMIT_HOURLY="1"/;
+        s/^TIMELINE_LIMIT_DAILY="[^"]*"/TIMELINE_LIMIT_DAILY="2"/;
+        s/^TIMELINE_LIMIT_WEEKLY="[^"]*"/TIMELINE_LIMIT_WEEKLY="1"/;
+        s/^TIMELINE_LIMIT_MONTHLY="[^"]*"/TIMELINE_LIMIT_MONTHLY="0"/;
+        s/^TIMELINE_LIMIT_YEARLY="[^"]*"/TIMELINE_LIMIT_YEARLY="0"/
+    ' /etc/snapper/configs/root
+    # Modifyling default timeline for home config
+    "$ESCALATION_TOOL" sed -i'' '
+        s/^TIMELINE_LIMIT_HOURLY="[^"]*"/TIMELINE_LIMIT_HOURLY="2"/;
+        s/^TIMELINE_LIMIT_DAILY="[^"]*"/TIMELINE_LIMIT_DAILY="1"/;
+        s/^TIMELINE_LIMIT_WEEKLY="[^"]*"/TIMELINE_LIMIT_WEEKLY="0"/;
+        s/^TIMELINE_LIMIT_MONTHLY="[^"]*"/TIMELINE_LIMIT_MONTHLY="1"/;
+        s/^TIMELINE_LIMIT_YEARLY="[^"]*"/TIMELINE_LIMIT_YEARLY="0"/
+    ' /etc/snapper/configs/home
+    printf "%b\n" "${GREEN}Snapper configs and first snapshots created.${RC}"
+}
+
+# Starting services
+serviceStartEnable() {
+    printf "%b\n" "${YELLOW}==================================================================================${RC}"
+    printf "%b\n" "${YELLOW}Starting and enabling snapper-timeline.timer and snapper-cleanup.timer services...${RC}"
+    printf "%b\n" "${YELLOW}==================================================================================${RC}"
+    "$ESCALATION_TOOL" systemctl enable --now snapper-timeline.timer
+    "$ESCALATION_TOOL" systemctl enable --now snapper-cleanup.timer
+    printf "%b\n" "${GREEN}Snapper services started and enabled.${RC}"
+}
+
+# Ask user if they want to install grub-btrfs
+askInstallGrubBtrfs() {
+    printf "%b\n" "${YELLOW}=====================================${RC}"
+    printf "%b\n" "${YELLOW}(optional) grub-btrfs installation...${RC}"
+    printf "%b\n" "${YELLOW}=====================================${RC}"
+    printf "%b\n" "${YELLOW}You can skip installing grub-btrfs and use only Btrfs Assistant GUI or snapper CLI.${RC}"
+    printf "%b\n" "${CYAN}Notice: grub-btrfs may cause problems with booting into snapshots and other OSes on systems with secure boot/tpm. You will be asked to apply mitigation for this issue in next step.${RC}"
+
+    while true; do
+        printf "%b" "${YELLOW}Do you want to install grub-btrfs? Press (y) for yes, (n) for no, (f) to apply tpm mitigation to already installed grub-btrfs: ${RC}"
+        read -r response
+        case "$response" in
+            [yY]*)
+                installGrubBtrfs
+                break
+                ;;
+            [nN]*)
+                printf "%b\n" "${GREEN}Skipping grub-btrfs installation.${RC}"
+                break
+                ;;
+            [fF]*)
+                mitigateTpmError
+                break
+                ;;
+            *)
+                printf "%b\n" "${RED}Invalid input. Please enter 'y' for yes, 'n' for no, or (f) to apply tpm mitigation to already installed grub-btrfs.${RC}"
+                ;;
+        esac
+    done
+}
+
+# Install grub-btrfs
+installGrubBtrfs() {
+    # Check if the grub-btrfs dir exists before attempting to clone into it.
+    printf "%b\n" "${YELLOW}Downloading grub-btrfs and installing dependencies...${RC}"
+    if [ -d "$HOME/grub-btrfs" ]; then
+        rm -rf "$HOME/grub-btrfs"
+    fi
+    "$ESCALATION_TOOL" "$PACKAGER" install -y make git inotify-tools
+    cd "$HOME" && git clone https://github.com/Antynea/grub-btrfs
+    printf "%b\n" "${YELLOW}Installing grub-btrfs...${RC}"
+    cd "$HOME/grub-btrfs"
+    printf "%b\n" "${YELLOW}Modifying grub-btrfs configuration for Fedora...${RC}"
+    sed -i'' '/#GRUB_BTRFS_SNAPSHOT_KERNEL/a GRUB_BTRFS_SNAPSHOT_KERNEL_PARAMETERS="systemd.volatile=state"' config
+    sed -i'' '/#GRUB_BTRFS_GRUB_DIRNAME/a GRUB_BTRFS_GRUB_DIRNAME="/boot/grub2"' config
+    sed -i'' '/#GRUB_BTRFS_MKCONFIG=/a GRUB_BTRFS_MKCONFIG=/sbin/grub2-mkconfig' config
+    sed -i'' '/#GRUB_BTRFS_SCRIPT_CHECK=/a GRUB_BTRFS_SCRIPT_CHECK=grub2-script-check' config
+    "$ESCALATION_TOOL" make install
+    printf "%b\n" "${YELLOW}Updating grub configuration and enabling grub-btrfsd service...${RC}"
+    "$ESCALATION_TOOL" grub2-mkconfig -o /boot/grub2/grub.cfg && "$ESCALATION_TOOL" systemctl enable --now grub-btrfsd.service
+    printf "%b\n" "${YELLOW}Cleaning up installation files...${RC}"
+    cd .. && rm -rf "$HOME/grub-btrfs"
+    printf "%b\n" "${GREEN}Grub-btrfs installed and service enabled.${RC}"
+    printf "%b\n" "${CYAN}Notice: To perform a system recovery via grub-btrfs, perform a restore operation with Btrfs Assistant GUI after booting into the snapshot.${RC}"
+    mitigateTpmError
+}
+
+mitigateTpmError() {
+    printf "%b\n" "${YELLOW}===============================================${RC}"
+    printf "%b\n" "${YELLOW}Mitigation for 'tpm.c:150:unknown TPM error'...${RC}"
+    printf "%b\n" "${YELLOW}===============================================${RC}"
+    printf "%b\n" "${YELLOW}Some systems with secure boot/tpm may encounter 'tpm.c:150:unknown TPM error' when booting into snapshots.${RC}"
+    printf "%b\n" "${YELLOW}If you encounter this issue, you can come back later and apply this mitigation or you can apply it now.${RC}"
+    while true; do
+        printf "%b\n" "${YELLOW}Do you want to apply the TPM error mitigation? (y/n): ${RC}"
+        read -r response
+        case "$response" in
+            [yY]*)
+                printf "%b\n" "${YELLOW}Creating /etc/grub.d/02_tpm file...${RC}"
+                echo '#!/bin/sh' | "$ESCALATION_TOOL" tee /etc/grub.d/02_tpm > /dev/null
+                echo 'echo "rmmod tpm"' | "$ESCALATION_TOOL" tee -a /etc/grub.d/02_tpm > /dev/null
+                "$ESCALATION_TOOL" chmod +x /etc/grub.d/02_tpm # makes the file executable
+                "$ESCALATION_TOOL" grub2-mkconfig -o /boot/grub2/grub.cfg # updates grub config
+                printf "%b\n" "${GREEN}Mitigation applied and grub config updated.${RC}"
+                break
+                ;;
+            [nN]*)
+                printf "%b\n" "${GREEN}Skipping TPM error mitigation.${RC}"
+                break
+                ;;
+            *)
+                printf "%b\n" "${RED}Invalid input. Please enter 'y' for yes or 'n' for no.${RC}"
+                ;;
+        esac
+    done
+}
+
+# Post install information
+someNotices() {
+    printf "%b\n" "${YELLOW}================================NOTICES================================${RC}"
+    printf "%b\n" "${YELLOW}Notice: You can manage snapshots from GUI with Btrfs Assistant or CLI with snapper.${RC}"
+    printf "%b\n" "${YELLOW}Notice: You may change (Hourly, daily, weekly, monthly, yearly) timeline settings with Btrfs Assistant GUI.${RC}"
+    printf "%b\n" "${RED}Notice: If you used the default Fedora disk partitioning during OS installation, the /boot configured as an separate EXT4 partition. Therefore, it cannot be included in root snapshots. Backup separately...${RC}"
+    printf "%b\n" "${YELLOW}================================NOTICES================================${RC}"
+    printf "%b\n" "${GREEN}Setup process completed.${RC}"
+}
+
+checkEnv
+checkEscalationTool
+installBtrfsStack
+configureSnapper
+serviceStartEnable
+askInstallGrubBtrfs
+someNotices
diff --git a/core/tabs/system-setup/tab_data.toml b/core/tabs/system-setup/tab_data.toml
index 080c06d99..fbb81db76 100644
--- a/core/tabs/system-setup/tab_data.toml
+++ b/core/tabs/system-setup/tab_data.toml
@@ -65,6 +65,17 @@ description = "Enables Virtualization through dnf"
 script = "fedora/virtualization.sh"
 task_list = "I"
 
+[[data.entries]]
+name = "Btrfs Assistant, Snapper Config, grub-btrfs"
+description = "Installs Btrfs Assistant, Snapper, dnf snapper plugin and takes the first root(/) and /home snapshots. Enables snapper-timeline and snapper-cleanup services. Installs Grub-Btrfs. Notice: To perform a system recovery via grub-btrfs, perform a restore operation with Btrfs Assistant GUI after booting into the snapshot. Notice: If you used the default Fedora disk partitioning during OS installation, the /boot configured as an separate EXT4 partition. Therefore, it cannot be included in root snapshots. Backup separately."
+script = "fedora/fedora-btrfs-assistant.sh"
+task_list = "I PFM SS"
+
+[[data.preconditions]]
+matches = true
+data = "command_exists"
+values = [ "btrfs" ]
+
 [[data]]
 name = "Build Prerequisites"
 description = "This script is designed to handle the installation of various software dependencies across different Linux distributions"
diff --git a/docs/userguide.md b/docs/userguide.md
index 2b7ad82bf..610c1fe9c 100644
--- a/docs/userguide.md
+++ b/docs/userguide.md
@@ -115,6 +115,7 @@ To know more about AUR helpers visit: https://wiki.archlinux.org/title/AUR_helpe
 That software is provided as precompiled RPMs for all current Fedora versions and current Red Hat Enterprise Linux or clones versions; you can use the RPM Fusion repositories with tools like yum and PackageKit.
 For more information visit: https://rpmfusion.org/
 - **Virtualization**: Enables Virtualization through dnf
+- **Btrfs Assistant, Snapper Config, grub-btrfs**: Installs Btrfs Assistant, Snapper, dnf snapper plugin and takes the first root(/) and /home snapshots. Enables snapper-timeline and snapper-cleanup services. Installs Grub-Btrfs. Notice: To perform a system recovery via grub-btrfs, perform a restore operation with Btrfs Assistant GUI after booting into the snapshot. Notice: If you used the default Fedora disk partitioning during OS installation, the /boot configured as an separate EXT4 partition. Therefore, it cannot be included in root snapshots. Backup separately.
 - **Build Prerequisites**: This script is designed to handle the installation of various software dependencies across different Linux distributions
 - **Full System Cleanup**: This script is designed to remove unnecessary packages, clean old cache files, remove temporary files, and to empty the trash.
 - **Full System Update**: This command updates your system to the latest packages available for your distro