Skip to content

Latest commit

 

History

History
16 lines (15 loc) · 2.17 KB

README.md

File metadata and controls

16 lines (15 loc) · 2.17 KB
Raw

Building socat with wolfSSL

  • Configure wolfSSL with ./configure --enable-opensslextra --enable-opensslall. Add --enable-debug if you're going to be debugging.
  • make and sudo make install wolfSSL into /usr/local.
  • Download socat-1.7.3.4 with curl -O http://www.dest-unreach.org/socat/download/socat-1.7.3.4.tar.gz.
  • Unarchive this tar ball with tar xvf socat-1.7.3.4.tar.gz.
  • Apply the socat-1.7.3.4.patch file with patch -p1 < socat-1.7.3.4.patch (assuming the patch file is in the socat-1.7.3.4 directory; adjust the path according to your situation).
  • Regenerate the configure script with autoconf.
  • Configure socat with ./configure --with-wolfssl=/usr/local. Update the path if you've installed wolfSSL using a different prefix than /usr/local.
  • Run make clean and make to compile. I'm not sure exactly how socat has set up its Makefile stuff, but I've found you typically have to run make clean before re-compiling. Otherwise, any changes you make won't be picked up, and make will think it has nothing to do.
  • At this point, you can optionally install into /usr/local with make install. The example below assumes you're running socat from the socat-1.7.3.4 directory, though.

Example

  • Open one terminal window where you'll run the server. Start the server with ./socat openssl-listen:9999,reuseaddr,cert=/path/to/server-cert.pem,key=/path/to/server-key.pem,cafile=/path/to/client-cert.pem echo, replacing the /path/to/ in each path with the path to wolfssl/certs/.
  • Open another terminal window for the client. Start it with ./socat stdio openssl-connect:127.0.0.1:9999,cert=/path/to/client-cert.pem,key=/path/to/client-key.pem,cafile=/path/to/server-cert.pem,commonname=www.wolfssl.com, once again replacing the /path/to/ accordingly. The commonname option is important. If you don't include this, the client will error out, saying that the hostname (127.0.0.1 AKA localhost) doesn't match the common name in the server's cert (www.wolfssl.com).
  • Type a message and hit enter in the client window. You should see it echoed back from the server.
  • If you observe this traffic on the loopback interface (lo) in Wireshark, you should see that it's encrypted using TLS.