Problems with uploading firmware ch32v003f4p6

[Alex-IC]

I’m trying to upload code via Platformio ->Upload and getting an error:

Total         1875
<lambda>(["upload"], [".pio\build\genericCH32V003F4P6\firmware.elf"])
AVAILABLE: isp, minichlink, wch-link
CURRENT: upload_protocol = wch-link
openocd -c "debug_level 2" -s C:\Users\Alexey\.platformio\packages\tool-openocd-riscv-wch\bin -s C:\Users\Alexey\.platformio\packages\tool-openocd-riscv-wch\scripts -f wch-riscv.cfg -c init -c halt -c "program {.pio\build\genericCH32V003F4P6\firmware.elf} verify reset" -c shutdown
Open On-Chip Debugger 0.11.0+dev-02415-gfad123a16-dirty (2023-01-03-10:00)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
debug_level: 2

Info : only one transport option; autoselect 'sdi'
Warn : Transport "sdi" was already selected
Ready for Remote Connections
Info : WCH-LinkE  mode:RV version 2.7 
Info : wlink_init ok

*** [upload] Error 1
========================================================================== [FAILED] Took 2.58 seconds ======================

What could be the problem? Through the WCH Link Utility it is stitched without problems.
Chip ch32f008f4p6
VSCode 1.79.2
PlatformIO 6.1.7
OS Windows_NT x64 10.0.0.17763

[maxgerhardt]

This does seem like a bug so let's discuss this is only in the issue.