bmponly.ino

#include "Wire.h"    // imports the wire library for talking over I2C 
#include "Adafruit_BMP085.h"  // import the Pressure Sensor Library
Adafruit_BMP085 mySensor;  // create sensor object called mySensor

float tempC;  // Variable for holding temp in C
float tempF;  // Variable for holding temp in F
float pressure; //Variable for holding pressure reading

void setup(){
Serial.begin(9600); //turn on serial monitor
mySensor.begin();   //initialize mySensor
}

void loop() {
tempC = mySensor.readTemperature(); //  Read Temperature
tempF = tempC*1.8 + 32.; // Convert degrees C to F
pressure=mySensor.readPressure(); //Read Pressure

Serial.print("The Temp is: "); //Print Your results
Serial.print(tempF);
Serial.println(" degrees F");
Serial.print(tempC);

Serial.print("The Pressure is: ");
Serial.print(pressure);
Serial.println(" Pa.");
Serial.println("");
delay(250); //Pause between readings.
}