Vout on Display Not Accurate

[justacec]

When the display times out (I have mine set to 5 minutes) and then comes back, the Vout shows as 0.3V vice the reported output of 3.3V from the terminal interface.

Version Information

Bus Pirate 6 REV1
Firmware main branch (2024-07-27T14:08:40Z)
RP2350 with 512KB RAM, 128Mbit FLASH
S/N: 32A6968E95BBEBDC
https://BusPirate.com/
Storage:   0.10GB (FAT16 File System)

Configuration file: Not Detected
Available modes: HiZ 1-WIRE UART HDPLXUART I2C SPI 2WIRE DIO LED
Active mode: DIO
Display format: Auto
Data format: 8 bits, MSB bitorder
Pull-up resistors: OFF
Power supply: ON (3.3V/3.29V)
Current limit: OK (0.4mA/100.0mA)
Frequency generators:  
IO0: 10.000kHz, 50.00% duty cycle