The traffic split plugin allows users to incrementally direct percentages of traffic between various upstreams.
Note: The ratio between each upstream may not so accurate since the drawback of weighted round robin algorithm (especially when the wrr state is reset).
| Name | Type | Requirement | Default | Valid | Description |
|---|---|---|---|---|---|
| rules.match | array[object] | optional | List of matching rules. | ||
| rules.match.vars | array[array] | optional | A list consisting of one or more {var, operator, val} elements, like this: {{var, operator, val}, {var, operator, val}, ...}}. For example: {"arg_name", "==", "json"}, which means that the current request parameter name is json. The var here is consistent with the naming of Nginx internal variables, so request_uri, host, etc. can also be used; for the operator part, the currently supported operators are ==, ~=, ~~, >, <, in, has and !. For specific usage of operators, please see the operator-list part of lua-resty-expr. |
||
| rules.weighted_upstreams | array[object] | optional | List of upstream configuration rules. | ||
| weighted_upstreams.upstream_id | string/integer | optional | The upstream id is bound to the corresponding upstream(not currently supported). | ||
| weighted_upstreams.upstream | object | optional | Upstream configuration information. | ||
| upstream.type | enum | optional | roundrobin | [roundrobin, chash] | roundrobin supports weighted load, chash consistent hashing, the two are alternatives. |
| upstream.nodes | object | optional | In the hash table, the key of the internal element is the list of upstream machine addresses, in the format of address + Port, where the address part can be an IP or a domain name, such as 192.168.1.100:80, foo.com:80, etc. value is the weight of the node. In particular, when the weight value is 0, it has special meaning, which usually means that the upstream node is invalid and never wants to be selected. | ||
| upstream.timeout | object | optional | 15 | Set the timeout period for connecting, sending and receiving messages (time unit: second, all default to 15 seconds). | |
| upstream.pass_host | enum | optional | "pass" | ["pass", "node", "rewrite"] | pass: pass the host requested by the client, node: pass the host requested by the client; use the host configured with the upstream node, rewrite: rewrite the host with the value configured by the upstream_host. |
upstream.name |
string | optional | Identify the upstream service name, usage scenario, etc. | ||
| upstream.upstream_host | string | optional | Only valid when pass_host is configured as rewrite. | ||
| weighted_upstreams.weight | integer | optional | weight = 1 | The traffic is divided according to the weight value, and the roundrobin algorithm is used to divide multiple weight. |
The traffic-split plugin is mainly composed of two parts: match and weighted_upstreams. match is a custom conditional rule, and weighted_upstreams is upstream configuration information. If you configure match and weighted_upstreams information, then after the match rule is verified, it will be based on the weight value in weighted_upstreams; the ratio of traffic between each upstream in the plugin will be guided, otherwise, all traffic will be directly Reach the upstream configured on route or service. Of course, you can also configure only the weighted_upstreams part, which will directly guide the traffic ratio between each upstream in the plugin based on the weight value in weighted_upstreams.
Note: 1. In
match, the expression in vars is the relationship ofand, and the relationship between multiplevarsis the relationship ofor. 2. In the weighted_upstreams field of the plugin, if there is a structure with onlyweight, it means the upstream traffic weight value onrouteorservice. Such as:
"weighted_upstreams": [
......
{
"weight": 2
}
]Create a route and enable the traffic-split plugin:
curl http://127.0.0.1:9080/apisix/admin/routes/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
"uri": "/index.html",
"plugins": {
"traffic-split": {
"rules": [
{
"weighted_upstreams": [
{
"upstream": {
"name": "upstream_A",
"type": "roundrobin",
"nodes": {
"127.0.0.1:1981":10
},
"timeout": {
"connect": 15,
"send": 15,
"read": 15
}
},
"weight": 1
},
{
"weight": 1
}
]
}
]
}
},
"upstream": {
"type": "roundrobin",
"nodes": {
"127.0.0.1:1980": 1
}
}
}'The match rule part is missing, and the traffic is split according to the weight value configured by the weighted_upstreams in the plugin. Divide plugin's upstream and route's upstream according to the traffic ratio of 3:2, of which 60% of the traffic reaches the upstream of the 1981 port in the plugin, and 40% of the traffic reaches the default 1980 port on the route Upstream.
curl http://127.0.0.1:9080/apisix/admin/routes/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
"uri": "/index.html",
"plugins": {
"traffic-split": {
"rules": [
{
"weighted_upstreams": [
{
"upstream": {
"name": "upstream_A",
"type": "roundrobin",
"nodes": {
"127.0.0.1:1981":10
},
"timeout": {
"connect": 15,
"send": 15,
"read": 15
}
},
"weight": 3
},
{
"weight": 2
}
]
}
]
}
},
"upstream": {
"type": "roundrobin",
"nodes": {
"127.0.0.1:1980": 1
}
}
}'Test plugin:
There are 5 requests, 3 requests hit the upstream of port 1981 of the plugin, and 2 requests hit the upstream of port 1980 of route.
$ curl http://127.0.0.1:9080/index.html -i
HTTP/1.1 200 OK
Content-Type: text/html; charset=utf-8
hello 1980
$ curl http://127.0.0.1:9080/index.html -i
HTTP/1.1 200 OK
Content-Type: text/html; charset=utf-8
world 1981
......Get the match rule parameter through the request header (you can also get it through the request parameter or NGINX variable). After the match rule is matched, it means that all requests hit the upstream configured by the plugin, otherwise the request only hits the route configured upstream.
curl http://127.0.0.1:9080/apisix/admin/routes/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
"uri": "/index.html",
"plugins": {
"traffic-split": {
"rules": [
{
"match": [
{
"vars": [
["http_release","==","new_release"]
]
}
],
"weighted_upstreams": [
{
"upstream": {
"name": "upstream_A",
"type": "roundrobin",
"nodes": {
"127.0.0.1:1981":10
}
}
}
]
}
]
}
},
"upstream": {
"type": "roundrobin",
"nodes": {
"127.0.0.1:1980": 1
}
}
}'Test plugin:
The rule of match is matched, and all requests hit the upstream port 1981 configured by the plugin:
$ curl 'http://127.0.0.1:9080/index.html?name=jack' -H 'release: new_release' -i
HTTP/1.1 200 OK
Content-Type: text/html; charset=utf-8
......
world 1981The match rule fails to match, and all requests hit the 1980 port upstream configured on the route:
$ curl 'http://127.0.0.1:9080/index.html?name=jack' -H 'release: old_release' -i
HTTP/1.1 200 OK
Content-Type: text/html; charset=utf-8
......
world 1981Multiple vars rules can be set in match. Multiple expressions in vars have an add relationship, and multiple vars rules have an or relationship; as long as one of the vars is required If the rule passes, the entire match passes.
Example 1: Only one vars rule is configured, and multiple expressions in vars are in the relationship of add. In weighted_upstreams, the traffic is divided into 3:2 according to the value of weight, of which only the part of the weight value represents the proportion of upstream on the route. When match fails to pass, all traffic will only hit the upstream on the route.
curl http://127.0.0.1:9080/apisix/admin/routes/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
"uri": "/index.html",
"plugins": {
"traffic-split": {
"rules": [
{
"match": [
{
"vars": [
["arg_name","==","jack"],
["http_user-id",">","23"],
["http_apisix-key","~~","[a-z]+"]
]
}
],
"weighted_upstreams": [
{
"upstream": {
"name": "upstream_A",
"type": "roundrobin",
"nodes": {
"127.0.0.1:1981":10
}
},
"weight": 3
},
{
"weight": 2
}
]
}
]
}
},
"upstream": {
"type": "roundrobin",
"nodes": {
"127.0.0.1:1980": 1
}
}
}'The plugin sets the requested match rule and upstream with port 1981, and the route has upstream with port 1980.
Test plugin:
- After the verification of the
matchrule is passed, 60% of the requests hit the upstream of the plugin port 1981, and 40% of the requests hit the upstream of the 1980 port of theroute.
The match rule is successfully verified, and the upstream port of 1981 is hit.
$ curl 'http://127.0.0.1:9080/index.html?name=jack' -H 'user-id:30' -H 'apisix-key: hello' -i
HTTP/1.1 200 OK
Content-Type: text/html; charset=utf-8
......
world 1981The match rule fails to verify, and it hits the upstream of the default port of 1980.
$ curl 'http://127.0.0.1:9080/index.html?name=jack' -H 'user-id:30' -H 'apisix-key: hello' -i
HTTP/1.1 200 OK
Content-Type: text/html; charset=utf-8
......
hello 1980After 5 requests, the service of port 1981 was hit 3 times, and the service of port 1980 was hit 2 times.
Example 2: Configure multiple vars rules. Multiple expressions in vars are add relationships, and multiple vars are or relationships. According to the weight value in weighted_upstreams, the traffic is divided into 3:2, where only the part of the weight value represents the proportion of upstream on the route. When match fails to pass, all traffic will only hit the upstream on the route.
curl http://127.0.0.1:9080/apisix/admin/routes/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
"uri": "/index.html",
"plugins": {
"traffic-split": {
"rules": [
{
"match": [
{
"vars": [
["arg_name","==","jack"],
["http_user-id",">","23"],
["http_apisix-key","~~","[a-z]+"]
]
},
{
"vars": [
["arg_name2","==","rose"],
["http_user-id2","!",">","33"],
["http_apisix-key2","~~","[a-z]+"]
]
}
],
"weighted_upstreams": [
{
"upstream": {
"name": "upstream_A",
"type": "roundrobin",
"nodes": {
"127.0.0.1:1981":10
}
},
"weight": 3
},
{
"weight": 2
}
]
}
]
}
},
"upstream": {
"type": "roundrobin",
"nodes": {
"127.0.0.1:1980": 1
}
}
}'The plugin sets the requested match rule and the upstream port of 1981, and the route has upstream port of 1980.
Test plugin:
- The expressions of the two
varsare matched successfully. After thematchrule is verified, 60% of the requests hit the 1981 port upstream of the plugin, and 40% of the requests hit the 1980 port upstream of theroute.
$ curl 'http://127.0.0.1:9080/index.html?name=jack&name2=rose' -H 'user-id:30' -H 'user-id2:22' -H 'apisix-key: hello' -H 'apisix-key2: world' -i
HTTP/1.1 200 OK
Content-Type: text/html; charset=utf-8
......
world 1981$ curl 'http://127.0.0.1:9080/index.html?name=jack&name2=rose' -H 'user-id:30' -H 'user-id2:22' -H 'apisix-key: hello' -H 'apisix-key2: world' -i
HTTP/1.1 200 OK
Content-Type: text/html; charset=utf-8
......
hello 1980After 5 requests, the service of port 1981 was hit 3 times, and the service of port 1980 was hit 2 times.
- The second expression of
varsfailed to match (missing thename2request parameter). After thematchrule was verified, 60% of the requests hit the plugin's 1981 port upstream, and 40% of the request traffic hits Go upstream to the 1980 port ofroute.
$ curl 'http://127.0.0.1:9080/index.html?name=jack' -H 'user-id:30' -H 'user-id2:22' -H 'apisix-key: hello' -H 'apisix-key2: world' -i
HTTP/1.1 200 OK
Content-Type: text/html; charset=utf-8
......
world 1981$ curl 'http://127.0.0.1:9080/index.html?name=jack' -H 'user-id:30' -H 'user-id2:22' -H 'apisix-key: hello' -H 'apisix-key2: world' -i
HTTP/1.1 200 OK
Content-Type: text/html; charset=utf-8
......
hello 1980After 5 requests, the service of port 1981 was hit 3 times, and the service of port 1980 was hit 2 times.
- The expression verification of two
varsfailed (missing the request parameters ofnameandname2), thematchrule verification failed, and the response is the upstream datahello 1980of the defaultroute.
$ curl 'http://127.0.0.1:9080/index.html?name=jack' -i
HTTP/1.1 200 OK
Content-Type: text/html; charset=utf-8
......
hello 1980When you want to remove the traffic-split plugin, it's very simple, just delete the corresponding json configuration in the plugin configuration, no need to restart the service, it will take effect immediately:
$ curl http://127.0.0.1:9080/apisix/admin/routes/1 -H 'X-API-KEY: edd1c9f034335f136f87ad84b625c8f1' -X PUT -d '
{
"uri": "/index.html",
"plugins": {},
"upstream": {
"type": "roundrobin",
"nodes": {
"127.0.0.1:1980": 1
}
}
}'