[Features]
- Experimental basic support for 39 Byte Daikin A/C (#583)
- Handle send() repeats in A/C classes. Improve Coolix support. (#580)
- Add optional RX pin pullup and dump raw messages in IRMQTTServer.ino (#589)
[Misc]
- Make auto_analyse_raw_data.py work with Python3 (#581)
- Update CI/travis config due to esp8266 core 2.5.0 changes (#591)
[Features]
- Add deep support for the Hitachi 28-Byte A/C Protocol (#563)
- Deep decoding for Whirlpool A/C (#572)
- Improve security options for IRMQTTServer example. (#575)
- Require a changed firmware password before upload. (#576)
[Misc]
- Add missing '}' in output of Auto analyse. (#562)
- Make A/C example code a bit more simple. (#571)
[Bug Fixes]
- Add missing send() method to IRPanasonicAC class. (#545)
- Add missing sendWhirlpoolAC() to IRMQTTServer.ino (#558)
[Features]
- Add IR receiving support to IRMQTTServer. (#543)
- Pioneer support (#547)
- Add support for a second LG protocol variant. (#552)
- Support for short Panasonic A/C messages. (#553)
- Add support for Panasonic CKP series A/Cs. (#554)
- Experimental timer/clock support for Panasonic A/Cs. (#546)
- Add Made With Magic (MWM) support (#557)
[Misc]
- Grammar and typo fixes (#541, #549)
- Increase Panasonic A/C message tolerances. (#542)
- Added command mode2_decode in tools/ (#557)
- General code style cleanup (#560)
[Bug Fixes]
- Correct the byte used for Samsung AC Swing. (#529)
- Fix not sending Samsung A/C messages in IRMQTTServer. (#529)
[Features]
- Experimental support for Electra A/C messages. (#528)
- Experimental support for Panasonic A/C messages. (#535)
- Samsung A/C fixes & improvements (#529)
- IRMQTTServer v0.6.0 (#530)
[Misc]
- Change required WifiManager lib version to v0.14
- Add alias for RAWTICK to kRawTick. (#535)
- Update sendLutron() status. (#515)
- Remove leftover debug message in IRrecvDumpV2 (#526)
[Bug Fixes]
- Fix HTML menu error for GICABLE in IRMQTTServer. (#516)
- Fix Mitsubishi A/C mode setting. (#514)
- Add missing ',' in auto analyse tool generated code. (#513)
- Fix Fujitsu checksum validation. (#501)
- Remove errant Repeat debug statement in IRMQTTServer. (#507)
[Features]
- Mitsubishi A/C decode improvements. (#514)
- Basic support for Whirlpool A/C messages. (#511)
- Basic support for Samsung A/C messages. (#512)
- Experimental support for detailed Samsung A/C messages. (#521)
- Experimental support for detailed Coolix A/C messages. (#518)
- Experimental support for Lutron protocol. (#516)
- Calculate and use average values for timings in analysing tool. (#513)
[Misc]
- Style change from using #define's for constants to
const kConstantName. - Improve the JVC example code.
[Bug Fixes]
- Handle Space Gaps better in auto analyse tool. (#482)
- Correct min repeat for GICABLE in IRMQTTServer. (#494)
[Features]
- Add static IP config option to IRMQTTServer (#480)
- Full decoding/encoding support for the Haier YRW02 A/C. (#485 #486 #487)
[Misc]
- Update LG (28-bit) HDR mark and space timings. (#492)
- Spelling and grammar fixes (#491)
[Bug Fixes]
- Timing Fix: Update the period offset compensation.
[Features]
- Improvements for IRMQTTServer example (#466)
[Bug Fixes]
- Fix crash in IRMQTTServer when compiled under Arduino IDE. (#455)
- Default bit length not set for RCMM in IRMQTTServer example. (#456)
- Bad acknowledgements for some A/C protocols in IRMQTTServer example. (#460)
[Features]
- Allow disabling the use of delay() calls. (#450)
- Initial support for G.I. Cable protocol. (#458)
- Support of Hitachi A/C 13 & 53 byte messages. (#461)
[Misc]
- Auto Analyse Raw Data script converted to Python. (#454)
[Bug Fixes]
- Add missing WiFi.begin() call to IRGCTCPServer example. (#433)
- Add missing sendHaierAC() to IRMQTTServer example. (#434 & #444)
- Make mqtt clientid unique in IRMQTTServer example. (#444)
[Features]
- Initial Mitsubishi projector protocol support. (#442)
- Experimental support of Hitachi A/C messages. (#445)
- Improve transmission pulse modulation support. Allow disabling of transmission frequency modulation.(#439)
[Misc]
- IRMQTTServer example improvements. (#444)
[Bug Fixes]
- Ensure the IR LED is off before we start. (#405)
[Features]
- Experimental decode support for Gree HVAC units (#397)
- Initial support for Haier A/Cs. (#409)
- Improve timing accuracy of unit tests. (#403)
- Rework matchData() to handle equal total data bit time protocols. (#408)
[Misc]
- Add startup text to IRrecvDumpV2 and IRrecvDemo (#412)
- Tweak timings on Fujitsu A/C header (#418)
- AutoAnalyseRawData.sh: Add some support for handling larger than 64 bit codes. (#419)
- Use better comments for send GPIO in examples. (#425)
[Bug Fixes]
- Integer underflow caused device not to respond in
sendJVC()(#401)
[Features]
- Initial support for sending & receiving Carrier HVAC codes. (#387)
- Add Pronto HEX code support to gc_decode tool. (#388)
[Misc]
- Make mDNS independent of MQTT in IRMQTTServer example code. (#390 #391)
[Bug Fixes]
- Setting
#define SEND_FUJITSU_AC falsecaused a compilation error (#375) - Integer underflow caused huge
space()insendGeneric()(#381)
[Features]
- Support sending & receiving Lasertag codes. (#374)
- Reduce the library footprint by using a new
sendGeneric()routine. (#373)
[Misc]
- Lots of grammar & typo fixes. (#378)
- Update keywords.txt for Arduino IDE users (#371)
- Update pins in examples so they are compatible with Adafruit boards. (#383)
[Bug Fixes]
- Panasonic-based protocols had incorrect message gap. (#358)
- Formatting error for large rawData values in example code. (#355)
- Off-by-one error in payload_copy malloc. (#337)
- Off-by-one error in unit test helper routines (#363)
[Features]
- Support sending and receiving Midea A/C codes.
- Support for receiving Kelvinator A/C codes. (#332)
- Support more operation features for Daikin A/Cs.
- Support for decoding Daikin A/Cs.
- Support sending and receiving Toshiba A/Cs. (#333)
- Support sending and receiving AR-DB1 Fujitsu A/C codes. (#367)
- Add new AutoAnalyseRawData.sh & RawToGlobalCache.sh tools (#345) (#343)
- Support for MagiQuest wands. (#365)
[Misc]
- Add checksum verification to Kelvinator A/C decodes. (#348)
- Changes to the threshold reporting of UNKNOWN messages (#347)
- Major re-work of Daikin A/C support.
- Sending for all A/Cs added to MQTT example code.
- MQTT example code improvements. (#334)
- IRrecvDumpV2 significant output improvements. (#363)
- Improved unit test coverage for the library.
[Features]
- Support for sending and decoding Nikai TV messages. (#311, #313)
- gc_decode: External utility to decode Global Cache codes. (#308, #312)
- IRMQTTServer: Example code to send IR messages via HTTP & MQTT. (#316, #323)
- Improve converting 64bit values to hexadecimal. (#318)
[Misc]
- IRrecvDump.ino code is now deprecated. Use IRrecvDumpV2.ino instead. (#314)
[Bug Fixes]
- Add printing output of RC-MM and RC-5X protocols in example code. (#284)
- LG timing improvements based on observations (#291)
[Features]
- Automatic capture timing calibration for some protocols. (#268)
- Support for creating & sending Trotec AC codes. (#279)
- Support for creating & sending Argo Ulisse 13 DCI codes. (#280 #300)
- Move to 2 microsecond timing resolution for capture of codes. (#287)
- Capture buffer changes:
- Size at runtime. (#276)
- Message timeout at runtime. (#294)
- Simplify creating & using a second buffer (#303)
- New example code:
- Trotec A/C (#279)
- LG A/C units (#289)
- Argo Ulisse 13 DCI codes. (#300)
[Bug Fixes]
- GlobalCache incorrectly using hardware offset for period calc. (#267)
[Features]
- Support reporting of 'NEC'-like 32-bit protocols. e.g. Apple TV remote (#265)
- Add an example of sendRaw() to IRsendDemo.ino (#270)
[Features]
- Support for sending Pronto IR codes. (#248)
- Support for sending Fujitsu A/C codes. (#88)
- Minor improvements to examples.
[Bug fixes]
- Capture buffer could become corrupt after large message, breaking subsequent decodes. (#253)
[Bug fixes]
- Correct decode issue introduced in v2.0.1 affecting multiple protocol decoders (#243)
- Correct post-message gap for the Panasonic protocol(s) (#245)
- Incorrect display of the decoded uint64_t value in the example code. (#245)
[Bug fixes]
- Decoding protocols when it doesn't detect a post-command gap, and there is no more data. (#243)
- Incorrect minimum size calculation when there is no post-command gap. (#243)
[Misc]
- This is almost a complete re-write of the library.
[Features]
- All suitable protocols now handle 64-bit data messages and are repeatable via an optional argument.
- Unit tests for all protocols.
- Far better and stricter decoding for most protocols.
- Address & command decoding for protocols where that information is available.
- Much more precise timing for generation of signals sent.
- Lower duty-cycles for some protocols.
- Several new protocols added, and some new sending and decoding routines for existing ones.
- Ability to optionally chose which protocols are included, enabling faster decoding and smaller code footprints if desired.
- Support for far larger capture buffers. (e.g. RAWLEN > 256)
[Bug fixes]
- Numerous bug fixes.
[Features]
- Add ability to copy IR capture buffer, and continue capturing. Means faster and better IR command decoding.
- Reduce IRAM usage by 28 bytes.
- Improve capture of RC-MM & Panasonic protocols.
- Upgrade IRrecvDumpV2 to new IR capture buffer. Much fewer corrupted/truncated IR messages.
[Bug fixes]
- Fix a reported problem when sending the LG protocol. Preemptive fix for possible similar cases.
- Fix minor issues in examples.
[Features]
- Add documentation to some examples to aid new people.
- Add ALPHA support for RC-MM protocol. (Known to be currently not 100% working.)