Skip to content

Latest commit

 

History

History
103 lines (67 loc) · 7.06 KB

README.md

File metadata and controls

103 lines (67 loc) · 7.06 KB
Raw

Beluga demos!

Here you will find minimal, interactive demos to test the capabilities of the Beluga library.

Note

The Beluga library is not included in this repository. You can find the official beluga project in the https://github.com/Ekumen-OS/beluga repository.

hallway.mp4

Pre-requisites

This guide assumes you are using a Linux system with a working Docker installation. You can check if this is the case by running the following command in a terminal:

docker run hello-world

If you don't have Docker installed, you can find instructions on how to install it here. Instructions for installing Docker on Ubuntu can be found here.

Quick start

Step 1: Clone the repository

The first step is to clone the repository:

git clone [email protected]:Ekumen-OS/beluga-demos.git

Step 2: Run the docker container

Step into the repository directory and start the docker image. The first time you run the docker container, the image will be built first; this build process may take a few minutes.

cd beluga-demos
./docker/run.sh --build

Step 3: Build the demo software code

If this step succeeds you'll be inside the docker container. Now you need to build the demo software stack and run one of the demos.

demo_build

Step 4: Run a demo

Finally, run one of the demos. You can run them by typing their names in the terminal. For instance, the following command will run the lidar_likelihood_model_hallway_demo demo:

lidar_likelihood_model_hallway_demo

You'll find a list of the predefined demos in a table in the section below.

Once the demo starts you'll see three windows pop up (see the screen capture below):

  • Gazebo simulation running the robot and the simulated world around it.
  • RViz visualization showing sensor input values, pose estimation, particle filter belief, maps, etc.
  • A small terminal that you can use to move the robot around (upper-left corner on the screen capture)

These windows can bee seen in the following screen capture on the right-hand side (Gazebo), left-hand side (RViz), and upper-right corner (terminal).

Demo running

You can close the demo by pressing Ctrl+C in the terminal where you initially started it.

Available demos

This table contains the list of predefined demos that you can run:

Alias command Description
lidar_beam_model_hallway_demo Demo using the beluga_amcl node to localize in a world built out of the Cartographer Magazino dataset map. The node is configured to use the beam sensor model configuration.
lidar_likelihood_model_hallway_demo Demo using the beluga_amcl node to localize in a world built out of the Cartographer Magazino dataset map. The node is configured to use the likelihood sensor model configuration.
lidar_beam_model_office_demo Demo using the beluga_amcl node moving around a large office cluttered with unmapped obstacles. The configured sensor model is beam.
lidar_likelihood_model_office_demo Demo using the beluga_amcl node moving around a large office cluttered with unmapped obstacles. Sensor model is likelihood.
apriltags_localization_demo Simple custom localization node using the beluga library to localize the robot within a large $10m \times 10m$ area using Apriltag markers as landmarks. The code of this localization node can be found within this repository here.
light_beacons_localization_demo Simple custom localization node using the beluga library to localize the robot within a large $10m \times 10m$ area using light sources as landmarks. The code of this localization node can be found within this repository here.
nav2_integration_demo Demo using the beluga_amcl node in lieu of the nav2_amcl in a Nav2 stack to navigate around a large office cluttered with unmapped obstacles.

Under the hood

Under this hood this repository is a ROS 2 workspace with a few packages and a custom Docker image that contains all the dependencies needed to run the demos.

The usual ROS 2 tooling can be used to build, launch and examine the demos inside the Docker container, if so desired.

The demo_build alias command is a wrapper around the colcon build tool that builds the workspace and sources it. It's equivalent to running the following commands:

cd ~/ws
colcon build --symlink-install
source install/setup.bash

The individual demo alias commands are just wrappers around the ros2 launch command. For instance, the lidar_likelihood_model_hallway_demo alias is equivalent to running the following command after having built the workspace:

ros2 launch beluga_demo_lidar_localization demo_hallway_likelihood_localization.launch.py

The full list of available aliases can be found in this file.