01. CatSniffer

What is CatSniffer?

CatSniffer (:smirk_cat:) is an original multiprotocol, and multiband board made for sniffing, communicating, and attacking IoT (Internet of Things) devices. It was designed as a highly portable USB stick that integrates the new chips TI CC1352, Semtech SX1262, and Microchip SAMD21E17.

This board is a swiss army for IoT security researchers, developers and enthusiasts. The board can be used with different types of software including third-party sniffers such as SmartRF Packet Sniffer, Sniffle, zigbee2mqtt, Z-Stack-firmware, our custom firmware, or you can even write your own software for your specific needs.

CatSniffer can operate in 3 different frequencies:

• LoRa
• Sub 1 GHz
• 2.4 GHz

Protocols

• Thread
• Zigbee
• Bluetooth 5 Low Energy (BLE)
• IEEE 802.15.4g
• 6LoWPAN (IPv6 over Low power Wireless Personal Area Networks)
• Sub 1Ghz and patented systems
• LoRa/LoRaWAN

Features

• "The SimpleLink™ CC1352P1F3RGZ device is a multiprotocol and multi-band Sub-1 GHz and 2.4-GHz wireless microcontroller (MCU) supporting Thread, Zigbee®, Bluetooth® 5.2 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), MIOTY®, Wi-SUN®, proprietary systems".
• CatSniffer uses SAMD21E17 as a USB-UART bridge to communicate with CC1352 chip, it's not necessary manual driver installation (exceptions could exist).
• Compatible OS: Windows, Linux, and MAC
• Auto program through the bootloader from TI CC (as long as it's not disabled in the code). No need external programer and it can be debugged with cJTAG through the default pin.
• Antenna SMA port, for an Antenna of your choice
• LEDs of general-purpose
• Reset button for SAMD21 & CC1352, Boot of CC1352, and one more for general purpose.

Compatible Software

• Oficial TI PACKET-SNIFFER-2 v1.8
• Flash Programmer 2 y Uniflash from TI
• Zigbee2mqtt
• Z-Stack-firmware

Pre-requisites for building firmware

• CCS version: The packet sniffer firmware has been tested with CCS 10.2.
• SimpleLink CC13x2 and CC26x2 SDK 3.40.00.02
• Python 3