clock is lost when router is reloaded despite saving config

[julien-duponchelle]

From @swils024 on May 21, 2017 20:29

While doing the Cisco CCNA (200-125) - Pass with GNS3 course on GNS3 Academy, I noticed that a user had commented on one of the NTP videos saying that the clock setting is lost when a router is reloaded. I have replicated the issue and despite saving the config before the reload, the config was lost. All comments welcome.

Copied from original issue: GNS3/gns3-gui#2075

[julien-duponchelle]

When using dynamips?

[julien-duponchelle]

From @swils024 on May 22, 2017 7:3

Yes using dynamips I was using one of the recommended IOS images.

Regards,
Stephen

On 22 May 2017 7:58 a.m., "Julien Duponchelle" [email protected]
wrote:

When using dynamips?

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
GNS3/gns3-gui#2075 (comment), or mute
the thread
https://github.com/notifications/unsubscribe-auth/AVP7vZBPVkhJfSn0zNC0Lsx4wwSehXMkks5r8TIugaJpZM4Nhtur
.

[vnjvijay]

Did You saved your configuration after setting