- Comware 7 and NETCONF support
- Python 3.7.4+
- Ansible 2.10.4+
- comware_ping - ping remote destinations from the comware 7 switch
- comware_vrrp - manages vrrp configurations on a comware v7 device
- comware_file_copy - copy local file to remote comware v7 device
- comware_install_os - copy (if necessary) and install a new operating system on comware v7 device
- comware_irf_ports - manages irf port creation and removal for comware v7 devices
- comware_vxlan - manages vxlan to vsi mappings and tunnel mappings to vxlan
- comware_vlan - manage vlan attributes for comware 7 devices
- comware_reboot - perform a reboot of a comware 7 device
- comware_irf_members - manages irf membership configuration
- comware_l2vpn_global - manage global config state for l2vpn
- comware_neighbors - retrieves active lldp neighbors (read-only)
- comware_ipinterface - manages ipv4/ipv6 addresses on interfaces
- comware_switchport - manages layer 2 parameters on switchport interfaces
- comware_install_config - activate a new current-running config in realtime
- comware_vxlan_tunnel - manages vxlan tunnels on comware 7 devices
- comware_command - execute cli commands on comware 7 devices
- comware_interface - manages physical interface attributes
- comware_facts - gathers facts of comware 7 devices
- comware_save - save the running configuration
- comware_portchannel - manages port-channel (lag) on comware 7 devices
- comware_vrrp_global - manages vrrp global configuration mode
- comware_vxlan_vsi - manages mapping of an ethernet service to a vsi (vxlan id)
- comware_clean_erase - factory default hp comware 7 device
- comware_aaa - Manage AAA
- comware_acl - Configure the acl issue to be applied to the interface
- comware_bfd - Manage bfd config
- comware_bgp_af - Manage address family configs
- comware_bgp_global - config bgp configs in the bgp instance view such as routerid
- comware_bgp_group - create and config bgp group
- comware_compare - Enter the configuration command and compare it with the expected result
- comware_config - Back uo current configuration to the specified file
- comware_dldp - Manage dldp authentication,interface,timeout and mode on Comware 7 devices
- comware_evpn - Configure the EVPN issue to be applied to the device
- comware_ftp - Configure device FTP function
- comware_hwtacacs - Manage hwtacacs scheme
- comware_iface_stp - Manage stp config in interface
- comware_igmp - Configure the igmp issue to be applied to the interface
- comware_intfState - Check the port status. If there are undo shutdown ports but the field ports are down, list these inconsistent ports. If not, return OK
- comware_isis_global - Manage isis for Comware 7 devices
- comware_isis_interface - Manage isis for Comware 7 devices
- comware_lacp - Manage lacp system priority, system mac on Comware 7 devices
- comware_license - loading device license
- comware_lldp - Manage lacp fast-Interval, tx-interval,hold-multplier on Comware 7 devices
- comware_lldp_global - Manage global config state for LLDP.this funtion can be take effect only global and interface LLDP all open. The interface LLDP is open default
- comware_lldp_interface - Manage lldp enable on interfaces.The default state is enable
- comware_local_user - Manage local_user
- comware_log - get the device diagnostic information and upload to file server
- comware_log_source - Manage output rules for log information on V7 devices
- comware_loghost - Manage info-center log host and related parameters on V7 devices
- comware_mtu - Manage mtu and jumboframe of the interface
- comware_netconf - Manage netconf log and xml function on Comware 7 devices.XML cfg not support enter xml view now,This is not normally done
- comware_netstream - Manage ip netstream,rate,timeout, max_entry,vxlan udp-port,and interface enable and ip netstream aggregation destination-prefix enable, netstream statistics output message destination address and destination UDP port number configurationon Comware 7 devices
- comware_ntp - Configure the ntp issue to be applied to the device
- comware_ospf - Manage ospf
- comware_ospf_intf - Manage ospf in interface
- comware_patch - Rollback the running configuration
- comware_radius - create radius scheme
- comware_rollback - Rollback the running configuration
- comware_sflow - Manage sflow attributes for Comware 7 devices
- comware_sflow_intf - Manage sflow interface flow collector and sampling_rate on Comware 7 devices
- comware_snmp_community - Manages SNMP community configuration on H3C switches
- comware_snmp_group - Manages SNMP group configuration on H3C switches.
- comware_snmp_target_host - Manages SNMP user configuration on H3c switches
- comware_snmp_user - Manages SNMP user configuration on H3c switches
- comware_startup - config the next restart file or ipe . patch function not available,please use patch module
- comware_stp - Manage stp global BPDU enable, working mode and tc-bpdu attack protection function
- comware_syslog_global - Manage system log timestamps and terminal logging level on Comware 7 devices
- comware_tele_stream - Manage telemetry global enable(disable) and telemetry stream timestamp enable(disable) and device-id on Comware 7 devices.Before config device-id,the timestamp must be enable
- comware_teleFlowGroup_global - Manage telemetry flow group agingtime on Comware 7 devices.The default value is Varies by device
- comware_TelemetryFlowTrace - Manage Package information of the message sent to the collector on V7 devices
- comware_vpn_instance - config instance rely ensure some instance configs can be set
- comware_vsi - Configure some command functions of vsi view
- comware_vsi_intf - Configure some functions of vsi-interface