Skip to content

Latest commit

 

History

History
75 lines (62 loc) · 2.88 KB

README.md

File metadata and controls

75 lines (62 loc) · 2.88 KB
Raw

pymagewell

pymagewell is a Python library for interfacing with Magewell ProCapture frame grabbers.

It is based on (and includes) Magewell's Windows SDK and is therefore Windows only. However, it provides a mock class that for testing and development that does not depend on the SDK's Windows .dll files, so pymagwell can also be installed on macOS and Linux.

Installation

From PyPI:

pip install pymagewell

From conda-forge (Windows and macOS only):

conda install -c conda-forge pymagewell

Example of use

A full working example is provided in example_script.py.

First, create a ProCaptureSettings dataclass:

from pymagewell import (
    ProCaptureSettings, ImageSizeInPixels, TransferMode, ColourFormat
)

device_settings = ProCaptureSettings(
    dimensions=ImageSizeInPixels(1920, 1080),
    color_format=ColourFormat.BGR24,  # Color format of captured video frames
    transfer_mode=TransferMode.LOW_LATENCY,
    num_lines_per_chunk=64  # has effect only in low latency mode
)

Then create a ProCaptureDevice (or MockProCaptureDevice for testing on a system without a grabber) configured with your chosen settings:

from pymagewell import ProCaptureDevice

device = ProCaptureDevice(settings=device_settings)

Then create a ProCaptureDeviceController to transfer frames from the device to your PC:

from pymagewell import ProCaptureController

controller = ProCaptureController(device)

Then you can grab frames in a loop using the transfer_when_ready() method, which will wait until a frame has been acquired by the device, transfer it from the device to the PC, and return it as a VideoFrame object. This is a blocking call.

while True:
    frame = controller.transfer_when_ready()

VideoFrame provides access to the pixels as a Numpy array with its as_array method. It also provides access to timestamps (datetime.datetime) describing the frame acquisition process:

t1 = frame.timestamps.buffering_started  # time at which frame started being written to the hardware buffer
buffer
t2 = frame.timestamps.buffering_complete  # time at which frame was completely written to the hardware buffer
t3 = frame.timestamps.transfer_started  # time at which the software started transferring the frame to PC memory
t4 = frame.timestamps.transfer_complete  # time by which the whole frame had arrived in PC memory

In TIMER and NORMAL transfer modes, transfer starts after the full frame has been written to hardware buffer. In LOW_LATENCY transfer mode, transfer starts while the frame is still being written to hardware memory. This will be reflected in the timestamps.