README.md

CR-10S

Marlin 2.0.x firmware configuration with BLTouch and EZR Struder.

Upgrade Parts

• SeeMeCNC EZR Struder
• Capricorn Bowden PTFE Tubing
• Creality 3D Printer BL Touch Auto Bed Leveling Sensor Kit
• Befenybay Upgrade 2020 Profile X-axis Synchronous Belt Tensioner
• Befenybay Upgrade Y-axis Synchronous Belt Tensioner

3DMN Z-Offset Callibration Instructions

1. Home 3D printer
2. M851 Z0 - Reset Z0Offset
3. M500 - Store setting to eeprom
4. M501 - Set active parameters
5. M503 - Display Active Parameters
6. G28 Z - Home Z Axis
7. G1 F60 Z0 - Move nozzle to true 0 offset
8. M211 S0 - Switch off soft endstops
9. Move nozzle towards bed slowly until the paper can barely move
10. Take note of the Z on the printer display (take that number and add the measurment of the calibration sheet or device used)
11. M851 Z X.XX (X.XX being your z offset achieved)
12. M211 S1 - Enable Soft Endstops
13. M500 - Save settings to Eeprom
14. M501 - Set Active Parameters
15. M503 - display current settings

Resources

Videos:

• Installing the BLTouch on the CR-10S
• Calibrating Z-Offset With A BLTouch Bed Levelling Probe

Firmware:

• Marlin
• TH3D Unified Firmware Package