cullAssistant.vl53l0x.yaml

esphome:
  name: cullassistant
  friendly_name: cullAssistant 

esp32:
  board: esp32dev
  framework:
    type: arduino

# Enable logging
logger:

api:
 
ota:

mdns:
  disabled: false

wifi:
  ap: {} # This spawns an AP with the device name and mac address with no password.

captive_portal:

web_server:
  port: 80

external_components:
  - source:
      type: git
      url: https://github.com/ssieb/esphome_components
      ref: b922726dae9cbb0e7945446610ca7aab808559f2
    components: [ serial_csv ]


uart:
 - id: uart_1
   tx_pin: 17
   rx_pin: 16
   baud_rate: 9600
   data_bits: 8
   parity: "NONE"
   stop_bits: 1

i2c:
  sda: 23
  scl: 22
  scan: true
  id: bus_a
    
sensor:
  - platform: vl53l0x
    id: distance_sensor
    name: "VL53L0x Distance"
    address: 0x29
    update_interval: 300s
    long_range: false
  - platform: template
    id: level
    name: Salt Level
    unit_of_measurement: '%'
    update_interval: 300s
    lambda: |-
      if (isnan(id(distance_sensor).state)) return 0;
      auto r = (id(distance_sensor).state - 0.7) * (100.0 - 0.0) / (0.1 - 0.7) + 0.0;
      if (r > 100) return 100;
      if (r < 0) return 0;
      return r;
  - platform: serial_csv
    uart_id: uart_1
    sensors:
      - index: 1
        name: Gallons
        unit_of_measurement: "gal"
        icon: "mdi:water"
        device_class: "water"
        state_class: "total_increasing"
      - index: 2
        name: Gallons Per Minute
        unit_of_measurement: "gal/min"
        icon: "mdi:water"
        device_class: "volume_flow_rate"
        state_class: "measurement"
        accuracy_decimals: 2
      - index: 3
        name: State
      - index: 4
        name: Gallons to Recharge
        unit_of_measurement: "gal"
        icon: "mdi:water"
        device_class: "water"
        state_class: "measurement"