install_h2.sh

#!/bin/bash

#====================================================
#	System Request:Debian 7+/Ubuntu 14.04+/Centos 6+
#	Author:	wulabing
#	Dscription: V2ray ws+tls onekey 
#	Version: 3.3.1
#	Blog: https://www.wulabing.com
#	Official document: www.v2ray.com
#====================================================

#fonts color
Green="\033[32m" 
Red="\033[31m" 
Yellow="\033[33m"
GreenBG="\033[42;37m"
RedBG="\033[41;37m"
Font="\033[0m"

#notification information
Info="${Green}[信息]${Font}"
OK="${Green}[OK]${Font}"
Error="${Red}[错误]${Font}"

v2ray_conf_dir="/etc/v2ray"
v2ray_conf="${v2ray_conf_dir}/config.json"
client_conf="${v2ray_conf_dir}/client.json"

#生成伪装路径
camouflage=`cat /dev/urandom | head -n 10 | md5sum | head -c 8`

source /etc/os-release

#从VERSION中提取发行版系统的英文名称，为了在debian/ubuntu下添加相对应的Nginx apt源
VERSION=`echo ${VERSION} | awk -F "[()]" '{print $2}'`

check_system(){
    
    if [[ "${ID}" == "centos" && ${VERSION_ID} -ge 7 ]];then
        echo -e "${OK} ${GreenBG} 当前系统为 Centos ${VERSION_ID} ${VERSION} ${Font} "
        INS="yum"
    elif [[ "${ID}" == "debian" && ${VERSION_ID} -ge 8 ]];then
        echo -e "${OK} ${GreenBG} 当前系统为 Debian ${VERSION_ID} ${VERSION} ${Font} "
        INS="apt"
    elif [[ "${ID}" == "ubuntu" && `echo "${VERSION_ID}" | cut -d '.' -f1` -ge 16 ]];then
        echo -e "${OK} ${GreenBG} 当前系统为 Ubuntu ${VERSION_ID} ${VERSION_CODENAME} ${Font} "
        INS="apt"
    else
        echo -e "${Error} ${RedBG} 当前系统为 ${ID} ${VERSION_ID} 不在支持的系统列表内，安装中断 ${Font} "
        exit 1
    fi

}
is_root(){
    if [ `id -u` == 0 ]
        then echo -e "${OK} ${GreenBG} 当前用户是root用户，进入安装流程 ${Font} "
        sleep 3
    else
        echo -e "${Error} ${RedBG} 当前用户不是root用户，请切换到root用户后重新执行脚本 ${Font}" 
        exit 1
    fi
}
judge(){
    if [[ $? -eq 0 ]];then
        echo -e "${OK} ${GreenBG} $1 完成 ${Font}"
        sleep 1
    else
        echo -e "${Error} ${RedBG} $1 失败${Font}"
        exit 1
    fi
}
ntpdate_install(){
    if [[ "${ID}" == "centos" ]];then
        ${INS} install ntpdate -y
    else
        ${INS} update
        ${INS} install ntpdate -y
    fi
    judge "安装 NTPdate 时间同步服务 "
}
time_modify(){

    ntpdate_install

    systemctl stop ntp &>/dev/null

    echo -e "${Info} ${GreenBG} 正在进行时间同步 ${Font}"
    ntpdate time.nist.gov

    if [[ $? -eq 0 ]];then 
        echo -e "${OK} ${GreenBG} 时间同步成功 ${Font}"
        echo -e "${OK} ${GreenBG} 当前系统时间 `date -R`（请注意时区间时间换算，换算后时间误差应为三分钟以内）${Font}"
        sleep 1
    else
        echo -e "${Error} ${RedBG} 时间同步失败，请检查ntpdate服务是否正常工作 ${Font}"
    fi 
}
dependency_install(){
    ${INS} install wget lsof -y

    if [[ "${ID}" == "centos" ]];then
       ${INS} -y install crontabs
    else
        ${INS} install cron
    fi
    judge "安装 crontab"

    # 新版的IP判定不需要使用net-tools
    # ${INS} install net-tools -y
    # judge "安装 net-tools"

    ${INS} install bc -y
    judge "安装 bc"

    ${INS} install unzip -y
    judge "安装 unzip"
}
port_alterid_set(){
    stty erase '^H' && read -p "请输入连接端口（default:443）:" port
    [[ -z ${port} ]] && port="443"
    stty erase '^H' && read -p "请输入alterID（default:64）:" alterID
    [[ -z ${alterID} ]] && alterID="64"
}

random_UUID(){
    let PORT=$RANDOM+10000
    UUID=$(cat /proc/sys/kernel/random/uuid)
}

modify_port_UUID(){
    sed -i "/\"port\": 443/c  \    \"port\": ${port}," ${1}
    sed -i "/\"id\"/c \\\t  \"id\":\"${UUID}\"," ${1}
    sed -i "/\"alterId\"/c \\\t  \"alterId\":${alterID}" ${1}
    sed -i "/\"path\"/c \\\t  \"path\":\"\/${camouflage}\/\"" ${1}
    sed -i "/\"address\"/c \\\t  \"address\":\"${domain}\"," ${1}
}
v2ray_install(){
    if [[ -d /root/v2ray ]];then
        rm -rf /root/v2ray
    fi

    mkdir -p /root/v2ray && cd /root/v2ray
    wget  --no-check-certificate https://install.direct/go.sh

    ## wget http://install.direct/go.sh
    
    if [[ -f go.sh ]];then
        bash go.sh --force
        judge "安装 V2ray"
    else
        echo -e "${Error} ${RedBG} V2ray 安装文件下载失败，请检查下载地址是否可用 ${Font}"
        exit 4
    fi
}
ssl_install(){
    if [[ "${ID}" == "centos" ]];then
        ${INS} install socat nc -y        
    else
        ${INS} install socat netcat -y
    fi
    judge "安装 SSL 证书生成脚本依赖"

    curl  https://get.acme.sh | sh
    judge "安装 SSL 证书生成脚本"

}
domain_check(){
    stty erase '^H' && read -p "请输入你的域名信息(eg:www.wulabing.com):" domain
    domain_ip=`ping ${domain} -c 1 | sed '1{s/[^(]*(//;s/).*//;q}'`
    echo -e "${OK} ${GreenBG} 正在获取 公网ip 信息，请耐心等待 ${Font}"
    local_ip=`curl -4 ip.sb`
    echo -e "域名dns解析IP：${domain_ip}"
    echo -e "本机IP: ${local_ip}"
    sleep 2
    if [[ $(echo ${local_ip}|tr '.' '+'|bc) -eq $(echo ${domain_ip}|tr '.' '+'|bc) ]];then
        echo -e "${OK} ${GreenBG} 域名dns解析IP  与 本机IP 匹配 ${Font}"
        sleep 2
    else
        echo -e "${Error} ${RedBG} 域名dns解析IP 与 本机IP 不匹配 是否继续安装？（y/n）${Font}" && read install
        case $install in
        [yY][eE][sS]|[yY])
            echo -e "${GreenBG} 继续安装 ${Font}" 
            sleep 2
            ;;
        *)
            echo -e "${RedBG} 安装终止 ${Font}" 
            exit 2
            ;;
        esac
    fi
}

port_exist_check(){
    if [[ 0 -eq `lsof -i:"$1" | wc -l` ]];then
        echo -e "${OK} ${GreenBG} $1 端口未被占用 ${Font}"
        sleep 1
    else
        echo -e "${Error} ${RedBG} 检测到 $1 端口被占用，以下为 $1 端口占用信息 ${Font}"
        lsof -i:"$1"
        echo -e "${OK} ${GreenBG} 5s 后将尝试自动 kill 占用进程 ${Font}"
        sleep 5
        lsof -i:"$1" | awk '{print $2}'| grep -v "PID" | xargs kill -9
        echo -e "${OK} ${GreenBG} kill 完成 ${Font}"
        sleep 1
    fi
}
acme(){
    ~/.acme.sh/acme.sh --issue -d ${domain} --standalone -k ec-256 --force
    if [[ $? -eq 0 ]];then
        echo -e "${OK} ${GreenBG} SSL 证书生成成功 ${Font}"
        sleep 2
        ~/.acme.sh/acme.sh --installcert -d ${domain} --fullchainpath /etc/v2ray/v2ray.crt --keypath /etc/v2ray/v2ray.key --ecc
        if [[ $? -eq 0 ]];then
        echo -e "${OK} ${GreenBG} 证书配置成功 ${Font}"
        sleep 2
        fi
    else
        echo -e "${Error} ${RedBG} SSL 证书生成失败 ${Font}"
        exit 1
    fi
}
start_process_systemd(){
    systemctl start v2ray
    judge "V2ray 启动"
}

v2ray_conf_add(){
    rm -rf ${v2ray_conf}
    rm -rf ${client_conf}
    cd /etc/v2ray
    wget  https://raw.githubusercontent.com/wulabing/V2Ray_ws-tls_bash_onekey/master/http2/config.json
    judge "config.json 下载"
    wget  https://raw.githubusercontent.com/wulabing/V2Ray_ws-tls_bash_onekey/master/http2/client.json
    judge "client.json 下载"
    random_UUID
    modify_port_UUID ${v2ray_conf}
    judge "config.json 配置变更"
    modify_port_UUID ${client_conf}
    judge "client.json 配置变更"
    json_addr=`curl --upload-file ${client_conf} https://transfer.sh/wulabing_${camouflage}_${UUID}.json`
}

show_information(){
    clear

    echo -e "${OK} ${Green} V2ray http2 over tls 安装成功 "
    echo -e "${Red} V2ray 配置信息 ${Font}"
    echo -e "${Red} 地址（address）:${Font} ${domain} "
    echo -e "${Red} 端口（port）：${Font} ${port} "
    echo -e "${Red} 用户id（UUID）：${Font} ${UUID}"
    echo -e "${Red} 额外id（alterId）：${Font} ${alterID}"
    echo -e "${Red} 加密方式（security）：${Font} 自适应 "
    echo -e "${Red} 传输协议（network）：${Font} h2 "
    echo -e "${Red} 伪装类型（type）：${Font} none "
    echo -e "${Red} 伪装域名（不要落下/）：${Font} /${camouflage}/ "
    echo -e "${Red} 底层传输安全：${Font} tls "
    echo -e "${OK} ${GreenBG} 请注意，目前的GUI客户端（V2rayN）已经支持H2手动添加配置，当然您也可以通过 添加自定义配置 添加节点信息  ${Font}"
    echo -e "${OK} ${GreenBG} 配置地址（方便下载）： ${json_addr} ${Font}"
    echo -e "${OK} ${GreenBG} 配置地址（服务器本地备份）：/etc/v2ray/client.json ${Font}"
}

main(){
    is_root
    check_system
    time_modify
    dependency_install
    domain_check
    port_alterid_set
    v2ray_install
    port_exist_check ${port}
    v2ray_conf_add
    
    #将证书生成放在最后，尽量避免多次尝试脚本从而造成的多次证书申请
    ssl_install
    acme

    show_information
    start_process_systemd
}

main