This guide aims to get a CRS installation up and running. This guide assumes that a compatible ModSecurity engine is already present and working. If unsure then refer to the extended install page for full details.
The first step is to download the CRS itself. The CRS project strongly recommends using a supported version.
Official CRS releases can be found at the following URL: https://github.com/coreruleset/coreruleset/releases.
For production environments, it is recommended to use the latest release, which is v4.0.0. For testing the bleeding edge CRS version, nightly releases are also provided.
{{% notice note %}} Releases are signed using the CRS project's GPG key (fingerprint: 3600 6F0E 0BA1 6783 2158 8211 38EE ACA1 AB8A 6E72). Releases can be verified using GPG/PGP compatible tooling.
To retrieve the CRS project's public key from public key servers using gpg, execute: gpg --keyserver pgp.mit.edu --recv 0x38EEACA1AB8A6E72 (this ID should be equal to the last sixteen hex characters in the fingerprint).
It is also possible to use gpg --fetch-key https://coreruleset.org/security.asc to retrieve the key directly.
{{% /notice %}}
The following steps assume that a *nix operating system is being used. Installation is similar on Windows but likely involves using a zip file from the CRS releases page.
To download the release file and the corresponding signature:
wget https://github.com/coreruleset/coreruleset/archive/refs/tags/v4.0.0.tar.gz
wget https://github.com/coreruleset/coreruleset/releases/download/v4.0.0/coreruleset-4.0.0.tar.gz.ascTo verify the integrity of the release:
gpg --verify coreruleset-4.0.0.tar.gz.asc v4.0.0.tar.gz
gpg: Signature made Wed Jun 30 10:05:48 2021 -03
gpg: using RSA key 36006F0E0BA167832158821138EEACA1AB8A6E72
gpg: Good signature from "OWASP Core Rule Set <[email protected]>" [unknown]
gpg: WARNING: This key is not certified with a trusted signature!
gpg: There is no indication that the signature belongs to the owner.
Primary key fingerprint: 3600 6F0E 0BA1 6783 2158 8211 38EE ACA1 AB8A 6E72If the signature was good then the verification succeeds. If a warning is displayed, like the above, it means the CRS project's public key is known but is not trusted.
To trust the CRS project's public key:
gpg --edit-key 36006F0E0BA167832158821138EEACA1AB8A6E72
gpg> trust
Your decision: 5 (ultimate trust)
Are you sure: Yes
gpg> quitThe result when verifying a release will then look like so:
gpg --verify coreruleset-4.0.0.tar.gz.asc v4.0.0.tar.gz
gpg: Signature made Wed Jun 30 15:05:48 2021 CEST
gpg: using RSA key 36006F0E0BA167832158821138EEACA1AB8A6E72
gpg: Good signature from "OWASP Core Rule Set <[email protected]>" [ultimate]Once the rule set has been downloaded and verified, extract the rule set files to a well known location on the server. This will typically be somewhere in the web server directory.
The examples presented below demonstrate using Apache. For information on configuring Nginx or IIS see the extended install page.
Note that while it's common practice to make a new modsecurity.d folder, as outlined below, this isn't strictly necessary. The path scheme outlined is common on RHEL-based operating systems; the Apache path used may need to be adjusted to match the server's installation.
mkdir /etc/crs4
tar -xzvf v4.0.0.tar.gz --strip-components 1 -C /etc/crs4Now all the CRS files will be located below the /etc/crs4 directory.
After extracting the rule set files, the next step is to set up the main OWASP CRS configuration file. An example configuration file is provided as part of the release package, located in the main directory: crs-setup.conf.example.
{{% notice note %}}
Other aspects of ModSecurity, particularly engine-specific parameters, are controlled by the ModSecurity "recommended" configuration rules, modsecurity.conf-recommended. This file comes packaged with ModSecurity itself.
{{% /notice %}}
In many scenarios, the default example CRS configuration will be a good enough starting point. It is, however, a good idea to take the time to look through the example configuration file before deploying it to make sure it's right for a given environment.
Once any settings have been changed within the example configuration file, as needed, it should be renamed to remove the .example portion, like so:
cd /etc/crs4
mv crs-setup.conf.example crs-setup.confThe last step is to tell the web server where the rules are. This is achieved by include-ing the rule configuration files in the httpd.conf file. Again, this example demonstrates using Apache, but the process is similar on other systems (see the extended install page for details).
echo 'IncludeOptional /etc/crs4/crs-setup.conf' >> /etc/httpd/conf/httpd.conf
echo 'IncludeOptional /etc/crs4/plugins/*-config.conf' >> /etc/httpd/conf/httpd.conf
echo 'IncludeOptional /etc/crs4/plugins/*-before.conf' >> /etc/httpd/conf/httpd.conf
echo 'IncludeOptional /etc/crs4/rules/*.conf' >> /etc/httpd/conf/httpd.conf
echo 'IncludeOptional /etc/crs4/plugins/*-after.conf' >> /etc/httpd/conf/httpd.confNow that everything has been configured, it should be possible to restart and being using the OWASP CRS. The CRS rules typically require a bit of tuning with rule exclusions, depending on the site and web applications in question. For more information on tuning, see false positives and tuning.
systemctl restart httpd.serviceAnother quick option is to use the official CRS pre-packaged containers. Docker, Podman, or any compatible container engine can be used. The official CRS images are published in the Docker Hub. The image most often deployed is owasp/modsecurity-crs: it already has everything needed to get up and running quickly.
The CRS project pre-packages both Apache and Nginx web servers along with the appropriate corresponding ModSecurity engine. More engines, like Coraza, will be added at a later date.
To protect a running web server, all that's required is to get the appropriate image and set its configuration variables to make the WAF receives requests and proxies them to your backend server.
Below is an example docker-compose file that can be used to pull the container images. All that needs to be changed is the BACKEND variable so that the WAF points to the backend server in question:
services:
modsec2-apache:
container_name: modsec2-apache
image: owasp/modsecurity-crs:apache
environment:
SERVERNAME: modsec2-apache
BACKEND: http://<backend server>
PORT: "80"
MODSEC_RULE_ENGINE: DetectionOnly
BLOCKING_PARANOIA: 2
TZ: "${TZ}"
ERRORLOG: "/var/log/error.log"
ACCESSLOG: "/var/log/access.log"
MODSEC_AUDIT_LOG_FORMAT: Native
MODSEC_AUDIT_LOG_TYPE: Serial
MODSEC_AUDIT_LOG: "/var/log/modsec_audit.log"
MODSEC_TMP_DIR: "/tmp"
MODSEC_RESP_BODY_ACCESS: "On"
MODSEC_RESP_BODY_MIMETYPE: "text/plain text/html text/xml application/json"
COMBINED_FILE_SIZES: "65535"
volumes:
ports:
- "80:80"
That's all that needs to be done. Simply starting the container described above will instantly provide the protection of the latest stable CRS release in front of a given backend server or service. There are lots of additional variables that can be used to configure the container image and its behavior, so be sure to read the full documentation.
Always verify that CRS is installed correctly by sending a 'malicious' request to your site or application, for instance:
curl 'https://www.example.com/?foo=/etc/passwd&bar=/bin/sh'Depending on your configurated thresholds, this should be detected as a malicious request. If you use blocking mode, you should receive an Error 403. The request should also be logged to the audit log, which is usually in /var/log/modsec_audit.log.
The most impactful change is the removal of application exclusion packages in favor of a plugin system. If you had activated the exclusion packages in CRS 3, you should download the plugins for them and place them in the plugins subdirectory. We maintain the list of plugins in our Plugin Registry. You can find detailed information on working with plugins in our plugins documentationhttps://coreruleset.org/docs/concepts/plugins/.
In terms of changes to the detection rules, the amount of changes is smaller than in the CRS 2—3 changeover. Most rules have only evolved slightly, so it is recommended that you keep any existing custom exclusions that you have made under CRS 3.
We recommend to start over by copying our crs-setup.conf.example to crs-setup.conf with a copy of your old file at hand, and re-do the customizations that you had under CRS 3.
Please note that we added a large number of new detections, and any new detection brings a certain risk of false alarms. Therefore, we recommend to test first before going live.
In general, you can update by unzipping our new release over your older one, and updating the crs-setup.conf file with any new settings. However, CRS 3.0 is a major rewrite, incompatible with CRS 2.x. Key setup variables have changed their name, and new features have been introduced. Your former modsecurity_crs_10_setup.conf file is thus no longer usable. We recommend you to start with a fresh crs-setup.conf file from scratch.
Most rule IDs have been changed to reorganize them into logical sections. This means that if you have written custom configuration with exclusion rules (e.g. SecRuleRemoveById, SecRuleRemoveTargetById, ctl:ruleRemoveById or ctl:ruleRemoveTargetById) you must renumber the rule numbers in that configuration. You can do this using the supplied utility util/id_renumbering/update.py or find the changes in util/id_renumbering/IdNumbering.csv.
However, a key feature of the CRS 3 is the reduction of false positives in the default installation, and many of your old exclusion rules may no longer be necessary. Therefore, it is a good option to start fresh without your old exclusion rules.
If you are experienced in writing exclusion rules for CRS 2.x, it may be worthwhile to try running CRS 3 in Paranoia Level 2 (PL2). This is a stricter mode, which blocks additional attack patterns, but brings a higher number of false positives — in many situations the false positives will be comparable with CRS 2.x. This paranoia level however will bring you a higher protection level than CRS 2.x or a CRS 3 default install, so it can be worth the investment.