From 0f67490744273555ec1149849463c16bcfbfb907 Mon Sep 17 00:00:00 2001 From: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com> Date: Sat, 2 Nov 2024 16:56:09 -0700 Subject: [PATCH] =?UTF-8?q?=F0=9F=90=9B=F0=9F=9A=B8=20Bigger,=20badder,=20?= =?UTF-8?q?better=20BIQU=20BX=20(#1115)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- config/examples/BIQU/BX/Configuration.h | 6 +++--- config/examples/BIQU/BX/Configuration_adv.h | 10 +++++----- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/config/examples/BIQU/BX/Configuration.h b/config/examples/BIQU/BX/Configuration.h index a86adf0743c..e6ececfea0d 100644 --- a/config/examples/BIQU/BX/Configuration.h +++ b/config/examples/BIQU/BX/Configuration.h @@ -1424,7 +1424,7 @@ //#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing -#define USE_PROBE_FOR_Z_HOMING +//#define USE_PROBE_FOR_Z_HOMING /** * Z_MIN_PROBE_PIN @@ -2359,7 +2359,7 @@ * - Allows Z homing only when XY positions are known and trusted. * - If stepper drivers sleep, XY homing may be required again before Z homing. */ -#define Z_SAFE_HOMING +//#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // (mm) X point for Z homing @@ -2834,7 +2834,7 @@ // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // #define INDIVIDUAL_AXIS_HOMING_MENU -//#define INDIVIDUAL_AXIS_HOMING_SUBMENU +#define INDIVIDUAL_AXIS_HOMING_SUBMENU // // SPEAKER/BUZZER diff --git a/config/examples/BIQU/BX/Configuration_adv.h b/config/examples/BIQU/BX/Configuration_adv.h index fa94e4c7842..28babd56f1c 100644 --- a/config/examples/BIQU/BX/Configuration_adv.h +++ b/config/examples/BIQU/BX/Configuration_adv.h @@ -936,7 +936,7 @@ #define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (linear=mm, rotational=°) Backoff from endstops after homing //#define XY_COUNTERPART_BACKOFF_MM 0 // (mm) Backoff X after homing Y, and vice-versa -#define QUICK_HOME // If G28 contains XY do a diagonal move first +//#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a real endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -1208,20 +1208,20 @@ //#define INPUT_SHAPING_Z #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y, INPUT_SHAPING_Z) #if ENABLED(INPUT_SHAPING_X) - #define SHAPING_FREQ_X 37.0 // (Hz) The default dominant resonant frequency on the X axis. + #define SHAPING_FREQ_X 0.0 // (Hz) The default dominant resonant frequency on the X axis. #define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Y) - #define SHAPING_FREQ_Y 37.0 // (Hz) The default dominant resonant frequency on the Y axis. + #define SHAPING_FREQ_Y 0.0 // (Hz) The default dominant resonant frequency on the Y axis. #define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping). #endif #if ENABLED(INPUT_SHAPING_Z) #define SHAPING_FREQ_Z 40.0 // (Hz) The default dominant resonant frequency on the Z axis. #define SHAPING_ZETA_Z 0.15 // Damping ratio of the Z axis (range: 0.0 = no damping to 1.0 = critical damping). #endif - //#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. + #define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage. //#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage. - //#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. + #define SHAPING_MENU // Add a menu to the LCD to set shaping parameters. #endif // @section motion