From f2e9fd389acfd50783027f2c84dc9ddca0fb5fbf Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 15 Dec 2024 21:43:03 -0600 Subject: [PATCH] =?UTF-8?q?=F0=9F=94=A8=20Move=20PIDTEMPCHAMBER?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit MarlinFirmware/Marlin#27562 --- config/default/Configuration_adv.h | 13 +++++++------ .../3DFabXYZ/Migbot/Configuration_adv.h | 14 +++++++------- config/examples/3DMatik/XL/Configuration_adv.h | 14 +++++++------- .../ADIMLab/Gantry v1/Configuration_adv.h | 14 +++++++------- .../ADIMLab/Gantry v2/Configuration_adv.h | 14 +++++++------- .../Alfawise/U20-bltouch/Configuration_adv.h | 14 +++++++------- .../examples/Alfawise/U20/Configuration_adv.h | 14 +++++++------- .../AliExpress/CL-260/Configuration_adv.h | 14 +++++++------- .../AliExpress/UM2pExt/Configuration_adv.h | 14 +++++++------- config/examples/Anet/A2/Configuration_adv.h | 14 +++++++------- config/examples/Anet/A2plus/Configuration_adv.h | 14 +++++++------- config/examples/Anet/A6/Configuration_adv.h | 14 +++++++------- config/examples/Anet/A8/Configuration_adv.h | 14 +++++++------- config/examples/Anet/A8plus/Configuration_adv.h | 14 +++++++------- config/examples/Anet/A9/Configuration_adv.h | 14 +++++++------- config/examples/Anet/E10/Configuration_adv.h | 14 +++++++------- .../Anet/E16/BTT SKR 1.3/Configuration_adv.h | 14 +++++++------- .../examples/Anet/E16/Stock/Configuration_adv.h | 14 +++++++------- config/examples/Anet/ET4+/Configuration_adv.h | 14 +++++++------- .../examples/Anet/ET4-Pro/Configuration_adv.h | 14 +++++++------- config/examples/Anet/ET4/Configuration_adv.h | 14 +++++++------- config/examples/Anet/ET4X/Configuration_adv.h | 14 +++++++------- .../examples/Anet/ET5-Pro/Configuration_adv.h | 14 +++++++------- config/examples/Anet/ET5/Configuration_adv.h | 14 +++++++------- config/examples/Anet/ET5X/Configuration_adv.h | 14 +++++++------- .../AnyCubic/Chiron/Configuration_adv.h | 14 +++++++------- .../Anycubic V1/Configuration_adv.h | 14 +++++++------- .../Mega Zero/Anycubic V1/Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../examples/AnyCubic/Vyper/Configuration_adv.h | 14 +++++++------- .../i3 Mega/Trigorilla AVR/Configuration_adv.h | 14 +++++++------- .../Trigorilla Pro STM32/Configuration_adv.h | 14 +++++++------- config/examples/AnyCubic/i3/Configuration_adv.h | 14 +++++++------- config/examples/ArmEd/Configuration_adv.h | 14 +++++++------- .../Artillery/Genius Pro/Configuration_adv.h | 14 +++++++------- .../Genius/BLTouch/Configuration_adv.h | 14 +++++++------- .../Artillery/Genius/V1/Configuration_adv.h | 14 +++++++------- .../Artillery/Hornet/Configuration_adv.h | 14 +++++++------- .../0.9 BMG - E3D V6/Configuration_adv.h | 14 +++++++------- .../Sidewinder X1/V1/Configuration_adv.h | 14 +++++++------- .../Artillery/Sidewinder X2/Configuration_adv.h | 14 +++++++------- config/examples/Azteeg/X5GT/Configuration_adv.h | 14 +++++++------- .../BIBO/TouchX/cyclops/Configuration_adv.h | 14 +++++++------- .../default - BLTouch/Configuration_adv.h | 14 +++++++------- .../BIBO/TouchX/default/Configuration_adv.h | 14 +++++++------- .../BIQU/B1 SE Plus/Configuration_adv.h | 14 +++++++------- config/examples/BIQU/B1 SE/Configuration_adv.h | 14 +++++++------- config/examples/BIQU/B1/Configuration_adv.h | 14 +++++++------- config/examples/BIQU/BX/Configuration_adv.h | 14 +++++++------- .../examples/BIQU/Hurakan/Configuration_adv.h | 14 +++++++------- .../BIQU/Thunder Standard/Configuration_adv.h | 14 +++++++------- .../examples/BQ/Hephestos/Configuration_adv.h | 14 +++++++------- .../examples/BQ/Hephestos_2/Configuration_adv.h | 14 +++++++------- config/examples/BQ/WITBOX/Configuration_adv.h | 14 +++++++------- .../examples/CNC/miniRambo/Configuration_adv.h | 14 +++++++------- config/examples/CTC/A13/Configuration_adv.h | 14 +++++++------- config/examples/CTC/Bizer/Configuration_adv.h | 14 +++++++------- .../i3 2560 Rev A/no probe/Configuration_adv.h | 14 +++++++------- config/examples/Cartesio/Configuration_adv.h | 14 +++++++------- .../Copymaster3D/300/Configuration_adv.h | 14 +++++++------- .../Copymaster3D/400/Configuration_adv.h | 14 +++++++------- .../Copymaster3D/500/Configuration_adv.h | 14 +++++++------- .../Creality/CR-10 Max/Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../CR-10 Mini/CrealityV1/Configuration_adv.h | 14 +++++++------- .../CR-10 Mini/MEEB-3DP/Configuration_adv.h | 14 +++++++------- .../CR-10 S4/CrealityV1/Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../CR-10 S5/CrealityV1/Configuration_adv.h | 14 +++++++------- .../CrealityV2.2 - BLTouch/Configuration_adv.h | 14 +++++++------- .../CrealityV427 - BLTouch/Configuration_adv.h | 14 +++++++------- .../Creality/CR-10 V2/Configuration_adv.h | 14 +++++++------- .../Creality/CR-10 V3/Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../CR-10/CrealityV1/Configuration_adv.h | 14 +++++++------- .../Creality/CR-10S Pro/Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../CrealityV1 - BLTouch/Configuration_adv.h | 14 +++++++------- .../CR-10S/CrealityV1/Configuration_adv.h | 14 +++++++------- .../Creality/CR-20 Pro/Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Creality/CR-20/Stock/Configuration_adv.h | 14 +++++++------- .../CR-30 PrintMill/Configuration_adv.h | 14 +++++++------- .../Creality/CR-6 SE/Configuration_adv.h | 14 +++++++------- .../examples/Creality/CR-8/Configuration_adv.h | 14 +++++++------- .../CrealityV24S4/Configuration_adv.h | 14 +++++++------- .../CrealityV423/Configuration_adv.h | 14 +++++++------- .../Creality/Ender-2/Configuration_adv.h | 14 +++++++------- .../Ender-3 Max Neo/Configuration_adv.h | 14 +++++++------- .../Creality/Ender-3 Max/Configuration_adv.h | 14 +++++++------- .../Creality/Ender-3 Neo/Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Creality free-runs/Configuration_adv.h | 14 +++++++------- .../Ender-3 Pro/CrealityV1/Configuration_adv.h | 14 +++++++------- .../CrealityV422/Configuration_adv.h | 14 +++++++------- .../CrealityV427 - BLTouch/Configuration_adv.h | 14 +++++++------- .../CrealityV427/Configuration_adv.h | 14 +++++++------- .../Ender-3 S1 Plus/Configuration_adv.h | 14 +++++++------- .../Creality/Ender-3 S1 Pro/Configuration_adv.h | 14 +++++++------- .../Ender-3 S1/STM32F1/Configuration_adv.h | 14 +++++++------- .../Ender-3 S1/STM32F4/Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../CrealityV422/Configuration_adv.h | 14 +++++++------- .../CrealityUI/Configuration_adv.h | 14 +++++++------- .../MarlinUI/Configuration_adv.h | 14 +++++++------- .../CrealityUI/Configuration_adv.h | 14 +++++++------- .../MarlinUI/Configuration_adv.h | 14 +++++++------- .../CrealityUI/Configuration_adv.h | 14 +++++++------- .../MarlinUI/Configuration_adv.h | 14 +++++++------- .../CrealityV422/CrealityUI/Configuration_adv.h | 14 +++++++------- .../CrealityV422/MarlinUI/Configuration_adv.h | 14 +++++++------- .../CrealityV427/CrealityUI/Configuration_adv.h | 14 +++++++------- .../CrealityV427/MarlinUI/Configuration_adv.h | 14 +++++++------- .../BigTreeTech E3 RRF/Configuration_adv.h | 14 +++++++------- .../BigTreeTech Manta E3 EZ/Configuration_adv.h | 14 +++++++------- .../BigTreeTech SKR 1.4/Configuration_adv.h | 14 +++++++------- .../2-into-1 Hotend/Configuration_adv.h | 14 +++++++------- .../Dual Z/Configuration_adv.h | 14 +++++++------- .../Single Extruder/Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Creality free-runs/Configuration_adv.h | 14 +++++++------- .../Ender-3/CrealityV1/Configuration_adv.h | 14 +++++++------- .../Ender-3/CrealityV422/Configuration_adv.h | 14 +++++++------- .../Ender-3/CrealityV427/Configuration_adv.h | 14 +++++++------- .../BLTouch/Configuration_adv.h | 14 +++++++------- .../FYSETC Cheetah 1.2/base/Configuration_adv.h | 14 +++++++------- .../FYSETC Cheetah 2.0/Configuration_adv.h | 14 +++++++------- .../FYSETC Cheetah/BLTouch/Configuration_adv.h | 14 +++++++------- .../FYSETC Cheetah/base/Configuration_adv.h | 14 +++++++------- .../Ender-3/MEEB-3DP/Configuration_adv.h | 14 +++++++------- .../MKS Robin E3/V1.0/Configuration_adv.h | 14 +++++++------- .../MKS Robin E3/V1.1/Configuration_adv.h | 14 +++++++------- .../Ender-3/MKS Robin E3P/Configuration_adv.h | 14 +++++++------- .../TH3D EZBoard Lite V2/Configuration_adv.h | 14 +++++++------- .../Creality/Ender-4/Configuration_adv.h | 14 +++++++------- .../BigTreeTech SKR 3/Configuration_adv.h | 14 +++++++------- .../CrealityV1 (ORIGIN UI)/Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Ender-5 Pro/CrealityV1/Configuration_adv.h | 14 +++++++------- .../CrealityV422/Configuration_adv.h | 14 +++++++------- .../CrealityV427/Configuration_adv.h | 14 +++++++------- .../Creality/Ender-5 S1/Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Creality free-runs/Configuration_adv.h | 14 +++++++------- .../Ender-5/CrealityV1/Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Ender-5/CrealityV427/Configuration_adv.h | 14 +++++++------- .../Creality/Ender-6/Configuration_adv.h | 14 +++++++------- .../Dagoma/Disco Ultimate/Configuration_adv.h | 14 +++++++------- .../examples/Daycom/3DP-100/Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../EasyThreeD/ET4000PLUS/Configuration_adv.h | 14 +++++++------- config/examples/Eazao/Zero/Configuration_adv.h | 14 +++++++------- config/examples/Einstart-S/Configuration_adv.h | 14 +++++++------- .../Elegoo/Neptune 2/Configuration_adv.h | 14 +++++++------- .../Eryone/Thinker SE/Configuration_adv.h | 14 +++++++------- .../Eryone/Thinker V2/Configuration_adv.h | 14 +++++++------- .../examples/FYSETC/AIO_II/Configuration_adv.h | 14 +++++++------- .../examples/FYSETC/F6_13/Configuration_adv.h | 14 +++++++------- config/examples/FYSETC/S6/Configuration_adv.h | 14 +++++++------- config/examples/Felix/DUAL/Configuration_adv.h | 14 +++++++------- .../examples/Felix/Single/Configuration_adv.h | 14 +++++++------- .../FlashForge/Creator 2X/Configuration_adv.h | 14 +++++++------- .../FlashForge/CreatorPro/Configuration_adv.h | 14 +++++++------- .../FlyingBear/P902/Configuration_adv.h | 14 +++++++------- .../FlyingBear/P905H/Configuration_adv.h | 14 +++++++------- .../FoamCutter/generic/Configuration_adv.h | 14 +++++++------- .../FoamCutter/rcKeith/Configuration_adv.h | 14 +++++++------- .../FolgerTech/FT-5 R2/Configuration_adv.h | 14 +++++++------- .../FolgerTech/i3-2020/Configuration_adv.h | 14 +++++++------- .../examples/Formbot/Raptor/Configuration_adv.h | 14 +++++++------- .../examples/Geeetech/A10/Configuration_adv.h | 14 +++++++------- .../examples/Geeetech/A10D/Configuration_adv.h | 14 +++++++------- .../Geeetech/A10M/Stock LCD/Configuration_adv.h | 14 +++++++------- .../A10M/YHCB2004_V4.1/Configuration_adv.h | 14 +++++++------- .../Geeetech/A10PRO/Configuration_adv.h | 14 +++++++------- .../Geeetech/A10T/Stock LCD/Configuration_adv.h | 14 +++++++------- .../A10T/YHCB2004_V4.1/Configuration_adv.h | 14 +++++++------- .../examples/Geeetech/A20/Configuration_adv.h | 14 +++++++------- .../examples/Geeetech/A20M/Configuration_adv.h | 14 +++++++------- .../examples/Geeetech/A20T/Configuration_adv.h | 14 +++++++------- .../examples/Geeetech/A30/Configuration_adv.h | 14 +++++++------- .../examples/Geeetech/A30M/Configuration_adv.h | 14 +++++++------- .../examples/Geeetech/A30T/Configuration_adv.h | 14 +++++++------- .../examples/Geeetech/D200/Configuration_adv.h | 14 +++++++------- .../Geeetech/Duplicator5/Configuration_adv.h | 14 +++++++------- .../examples/Geeetech/E180/Configuration_adv.h | 14 +++++++------- .../Geeetech/GT2560/Configuration_adv.h | 14 +++++++------- .../I3_Pro_X-GT2560/Configuration_adv.h | 14 +++++++------- .../examples/Geeetech/M201/Configuration_adv.h | 14 +++++++------- .../Geeetech/MeCreator2/Configuration_adv.h | 14 +++++++------- .../Geeetech/Me_creator/Configuration_adv.h | 14 +++++++------- .../Geeetech/Me_ducer/Configuration_adv.h | 14 +++++++------- .../Geeetech/PI3A PRO/Configuration_adv.h | 14 +++++++------- .../Prusa i3 Pro B/bltouch/Configuration_adv.h | 14 +++++++------- .../Prusa i3 Pro B/noprobe/Configuration_adv.h | 14 +++++++------- .../Geeetech/Prusa i3 Pro C/Configuration_adv.h | 14 +++++++------- .../Geeetech/Prusa i3 Pro W/Configuration_adv.h | 14 +++++++------- config/examples/HMS434/Configuration_adv.h | 14 +++++++------- .../examples/Hictop/3DP-17/Configuration_adv.h | 14 +++++++------- .../Infitary/i3-M508/Configuration_adv.h | 14 +++++++------- .../Intamsys/FunmatHT 4988/Configuration_adv.h | 17 +++++++++-------- config/examples/JGAurora/A1/Configuration_adv.h | 14 +++++++------- config/examples/JGAurora/A3/Configuration_adv.h | 14 +++++++------- config/examples/JGAurora/A5/Configuration_adv.h | 14 +++++++------- .../examples/JGAurora/A5S/Configuration_adv.h | 14 +++++++------- .../examples/JGAurora/Magic/Configuration_adv.h | 14 +++++++------- .../examples/Kingroon/KP3/Configuration_adv.h | 14 +++++++------- .../examples/Kingroon/KP3S/Configuration_adv.h | 14 +++++++------- .../Kingroon/KP3S_Pro/Configuration_adv.h | 14 +++++++------- .../Kingroon/KP5L-DIY/Configuration_adv.h | 14 +++++++------- config/examples/Labists/ET4/Configuration_adv.h | 14 +++++++------- config/examples/Longer/LK5/Configuration_adv.h | 14 +++++++------- .../examples/LulzBot/TAZ4/Configuration_adv.h | 14 +++++++------- config/examples/MBot/Cube/Configuration_adv.h | 14 +++++++------- .../MakerFarm/Pegasus 12/Configuration_adv.h | 14 +++++++------- config/examples/MakerParts/Configuration_adv.h | 14 +++++++------- .../Proforge2sDual/Configuration_adv.h | 14 +++++++------- config/examples/Malyan/M150/Configuration_adv.h | 14 +++++++------- config/examples/Malyan/M180/Configuration_adv.h | 14 +++++++------- config/examples/Malyan/M200/Configuration_adv.h | 14 +++++++------- .../Micromake/C1/basic/Configuration_adv.h | 14 +++++++------- .../Micromake/C1/enhanced/Configuration_adv.h | 14 +++++++------- config/examples/Mks/Robin/Configuration_adv.h | 14 +++++++------- .../Mks/Robin_Lite3/Configuration_adv.h | 14 +++++++------- .../examples/Mks/Robin_Pro/Configuration_adv.h | 14 +++++++------- config/examples/Mks/Sbase/Configuration_adv.h | 14 +++++++------- config/examples/Modix/Big60/Configuration_adv.h | 14 +++++++------- config/examples/Nextion/Configuration_adv.h | 14 +++++++------- .../Hadron/Sanguinololu/Configuration_adv.h | 14 +++++++------- .../Opulo/Lumen_REV3/Configuration_adv.h | 14 +++++++------- .../Opulo/Lumen_REV4/Configuration_adv.h | 14 +++++++------- config/examples/Ortur 4/Configuration_adv.h | 14 +++++++------- config/examples/Polargraph/Configuration_adv.h | 14 +++++++------- .../Printrbot/PrintrboardG2/Configuration_adv.h | 14 +++++++------- .../Simple Metal RevD/Configuration_adv.h | 14 +++++++------- .../Simple_Metal_RevF6/Configuration_adv.h | 14 +++++++------- config/examples/Prusa/MK3/Configuration_adv.h | 14 +++++++------- .../MK3S-BigTreeTech-BTT002/Configuration_adv.h | 14 +++++++------- config/examples/Qidi/Qidi 1/Configuration_adv.h | 14 +++++++------- .../examples/Raiscube/A8r/Configuration_adv.h | 14 +++++++------- .../RapideLite/RL200/Configuration_adv.h | 14 +++++++------- .../Renkforce/RF100/Configuration_adv.h | 14 +++++++------- .../Renkforce/RF100XL/Configuration_adv.h | 14 +++++++------- .../Renkforce/RF100v2/Configuration_adv.h | 14 +++++++------- .../RepRapPro/Huxley/Configuration_adv.h | 14 +++++++------- .../RepRapWorld/Megatronics/Configuration_adv.h | 14 +++++++------- .../Minitronics11/Configuration_adv.h | 14 +++++++------- .../Minitronics20/CNC/Configuration_adv.h | 14 +++++++------- config/examples/RigidBot/Configuration_adv.h | 14 +++++++------- config/examples/Robo3D/R1+/Configuration_adv.h | 14 +++++++------- .../Rolohaun/Rook MK1/Configuration_adv.h | 14 +++++++------- .../examples/SCARA/MP_SCARA/Configuration_adv.h | 14 +++++++------- .../examples/SCARA/Morgan/Configuration_adv.h | 14 +++++++------- .../Black_STM32F407VET6/Configuration_adv.h | 14 +++++++------- .../STM32/STM32F103RE/Configuration_adv.h | 14 +++++++------- .../examples/Simax/Mi-M200/Configuration_adv.h | 14 +++++++------- config/examples/Simulator/Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Sovol/SV-01/CrealityV22/Configuration_adv.h | 14 +++++++------- .../SV-01/CrealityV221/Configuration_adv.h | 14 +++++++------- config/examples/Sovol/SV-02/Configuration_adv.h | 14 +++++++------- config/examples/Sovol/SV-03/Configuration_adv.h | 14 +++++++------- config/examples/Sovol/SV-05/Configuration_adv.h | 14 +++++++------- config/examples/Sovol/SV-06/Configuration_adv.h | 14 +++++++------- config/examples/Sunlu/S8/Configuration_adv.h | 14 +++++++------- config/examples/Sunlu/T3/Configuration_adv.h | 14 +++++++------- .../TPARA/AXEL_TPARA/Configuration_adv.h | 14 +++++++------- .../Tevo/Michelangelo/Configuration_adv.h | 14 +++++++------- config/examples/Tevo/Nereus/Configuration_adv.h | 14 +++++++------- .../Tarantula Pro/MKS Gen_L/Configuration_adv.h | 14 +++++++------- .../MKS SGen_L/Configuration_adv.h | 14 +++++++------- .../Tornado/V1 (MKS Base)/Configuration_adv.h | 14 +++++++------- .../Tornado/V2 (MKS Gen_L)/Configuration_adv.h | 14 +++++++------- .../Ditto Pro/RAMPS 1.4/Configuration_adv.h | 14 +++++++------- config/examples/TinyBoy2/Configuration_adv.h | 14 +++++++------- .../D01/CXY-v6-191017 board/Configuration_adv.h | 14 +++++++------- config/examples/Tronxy/X1/Configuration_adv.h | 14 +++++++------- config/examples/Tronxy/X3A/Configuration_adv.h | 14 +++++++------- .../Green Board (Chitu V5)/Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- config/examples/Tronxy/X5S/Configuration_adv.h | 14 +++++++------- .../examples/Tronxy/X5SA-2E/Configuration_adv.h | 14 +++++++------- config/examples/Tronxy/X5SA/Configuration_adv.h | 14 +++++++------- .../examples/Tronxy/XY100/Configuration_adv.h | 14 +++++++------- .../examples/Tronxy/XY2-Pro/Configuration_adv.h | 14 +++++++------- .../Turnigy/Fabrikator/Configuration_adv.h | 14 +++++++------- .../Two Trees/BlueR Plus/Configuration_adv.h | 14 +++++++------- .../BlueR/BlueR V1/Configuration_adv.h | 14 +++++++------- .../BlueR/BlueR V2/Configuration_adv.h | 14 +++++++------- .../BlueR/BlueR V3/Configuration_adv.h | 14 +++++++------- .../Two Trees/SP-5_V3/Configuration_adv.h | 14 +++++++------- .../Sapphire Plus V2.1/Configuration_adv.h | 14 +++++++------- .../Sapphire Plus V2/Configuration_adv.h | 14 +++++++------- .../Two Trees/Sapphire Pro/Configuration_adv.h | 14 +++++++------- .../UltiMachine/Archim1/Configuration_adv.h | 14 +++++++------- .../UltiMachine/Archim2/Configuration_adv.h | 14 +++++++------- .../Ultimaker/Ultimaker 2+/Configuration_adv.h | 14 +++++++------- .../Ultimaker/Ultimaker 2/Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- config/examples/VORONDesign/Configuration_adv.h | 14 +++++++------- .../Velleman/K8200 Upgraded/Configuration_adv.h | 14 +++++++------- .../examples/Velleman/K8200/Configuration_adv.h | 14 +++++++------- .../K8400/Dual-head/Configuration_adv.h | 14 +++++++------- .../K8400/Single-head/Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../examples/WASP/PowerWASP/Configuration_adv.h | 14 +++++++------- .../Wanhao/Duplicator 4S/Configuration_adv.h | 14 +++++++------- .../Wanhao/Duplicator 6/Configuration_adv.h | 14 +++++++------- .../Duplicator i3 2.1/Configuration_adv.h | 14 +++++++------- .../Duplicator i3 Mini/Configuration_adv.h | 14 +++++++------- .../Duplicator i3 Plus/Configuration_adv.h | 14 +++++++------- .../examples/Weedo/Tina2/V2/Configuration_adv.h | 14 +++++++------- .../examples/Weedo/Tina2/V3/Configuration_adv.h | 14 +++++++------- .../examples/Weistek/wt150/Configuration_adv.h | 14 +++++++------- .../examples/Zonestar/P802M/Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Configuration_adv.h | 14 +++++++------- .../Kossel Linear Plus/Configuration_adv.h | 14 +++++++------- .../delta/Anycubic/Kossel/Configuration_adv.h | 14 +++++++------- .../delta/Anycubic/Predator/Configuration_adv.h | 14 +++++++------- .../Dreammaker/Overlord/Configuration_adv.h | 14 +++++++------- .../Dreammaker/Overlord_Pro/Configuration_adv.h | 14 +++++++------- .../delta/FLSUN/Q5-nano_v1/Configuration_adv.h | 14 +++++++------- .../delta/FLSUN/Q5-nano_v2/Configuration_adv.h | 14 +++++++------- .../delta/FLSUN/QQ-S/Configuration_adv.h | 14 +++++++------- .../delta/FLSUN/QQS-Pro/Configuration_adv.h | 14 +++++++------- .../FLSUN/auto_calibrate/Configuration_adv.h | 14 +++++++------- .../delta/FLSUN/kossel/Configuration_adv.h | 14 +++++++------- .../delta/FLSUN/kossel_mini/Configuration_adv.h | 14 +++++++------- .../delta/Geeetech/G2/Configuration_adv.h | 14 +++++++------- .../delta/Geeetech/G2Pro/Configuration_adv.h | 14 +++++++------- .../delta/Geeetech/G2S/Configuration_adv.h | 14 +++++++------- .../delta/Geeetech/G2SPro/Configuration_adv.h | 14 +++++++------- .../Geeetech/Rostock 301/Configuration_adv.h | 14 +++++++------- .../delta/Hatchbox_Alpha/Configuration_adv.h | 14 +++++++------- .../delta/MKS/SBASE/Configuration_adv.h | 14 +++++++------- .../delta/Malyan M300/Configuration_adv.h | 14 +++++++------- .../Tevo Little Monster/Configuration_adv.h | 14 +++++++------- .../delta/Velleman/K8800/Configuration_adv.h | 14 +++++++------- .../examples/delta/generic/Configuration_adv.h | 14 +++++++------- .../delta/kossel_clear/Configuration_adv.h | 14 +++++++------- .../delta/kossel_mini/Configuration_adv.h | 14 +++++++------- .../delta/kossel_pro/Configuration_adv.h | 14 +++++++------- .../delta/kossel_xl/Configuration_adv.h | 14 +++++++------- .../gCreate/gMax1.5+/Configuration_adv.h | 14 +++++++------- .../Octopus 8 LINEAR_AXES/Configuration_adv.h | 14 +++++++------- .../RAMPS 5 LINEAR_AXES/Configuration_adv.h | 14 +++++++------- config/examples/makibox/Configuration_adv.h | 14 +++++++------- .../examples/tvrrug/Round2/Configuration_adv.h | 14 +++++++------- 377 files changed, 2641 insertions(+), 2639 deletions(-) diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 46380f8c54e..2789922e17a 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -211,18 +211,19 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 05308cb0558..dc593368be7 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/3DMatik/XL/Configuration_adv.h b/config/examples/3DMatik/XL/Configuration_adv.h index af8627193eb..bf45fcecb0c 100644 --- a/config/examples/3DMatik/XL/Configuration_adv.h +++ b/config/examples/3DMatik/XL/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index e0e278197b2..616241aaf26 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index b0bb327bdbd..dbccde27664 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 37b5982f419..f93d6955be6 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index ccd36d640bc..85939a0ad97 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/AliExpress/CL-260/Configuration_adv.h b/config/examples/AliExpress/CL-260/Configuration_adv.h index 46380f8c54e..b39ed2c02ca 100644 --- a/config/examples/AliExpress/CL-260/Configuration_adv.h +++ b/config/examples/AliExpress/CL-260/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 541e283e17a..7229b69ffa3 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 4108118d399..dccdbc9907b 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index 4108118d399..dccdbc9907b 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index de8e0e10ca3..2af095a3297 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 2172f49ca92..2063bebf376 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 9e92e7c4a16..0b9b512985c 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 73048c61c33..f1fa492dd44 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index b565f7b4f5a..fabdad16e12 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index f15c459030b..4f656a84ae2 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index 2c6676e43d4..773727b3bed 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index 4adeb15de97..f5720cd03dc 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index 4adeb15de97..f5720cd03dc 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index 4adeb15de97..f5720cd03dc 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index 4adeb15de97..f5720cd03dc 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index a3a1a430eaa..0d17675365f 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index a3a1a430eaa..0d17675365f 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index a3a1a430eaa..0d17675365f 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index 3f64af2fcca..83361288157 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index 37ad0a57558..1525bf6be4a 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index dfc844016d1..f7b1f448e49 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index e87a90b2620..1db4cf74a2b 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/AnyCubic/Vyper/Configuration_adv.h b/config/examples/AnyCubic/Vyper/Configuration_adv.h index 7a330715214..38f065a1604 100644 --- a/config/examples/AnyCubic/Vyper/Configuration_adv.h +++ b/config/examples/AnyCubic/Vyper/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h index 096ade0b47a..a7607b81146 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h index 8beddd0b7ce..9fd2b4a652f 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index dcb273ed619..7383a71cb2c 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index b7f90844aa6..6dc1c7f08e9 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -216,18 +216,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Artillery/Genius Pro/Configuration_adv.h b/config/examples/Artillery/Genius Pro/Configuration_adv.h index 89407f37e66..4bf5d513d23 100644 --- a/config/examples/Artillery/Genius Pro/Configuration_adv.h +++ b/config/examples/Artillery/Genius Pro/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h index 75828ff7f3f..1fbe2bb4572 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Artillery/Genius/V1/Configuration_adv.h b/config/examples/Artillery/Genius/V1/Configuration_adv.h index f4edf08eb78..740b2918350 100644 --- a/config/examples/Artillery/Genius/V1/Configuration_adv.h +++ b/config/examples/Artillery/Genius/V1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Artillery/Hornet/Configuration_adv.h b/config/examples/Artillery/Hornet/Configuration_adv.h index 5efd987a3a6..8e8b9ce5b67 100644 --- a/config/examples/Artillery/Hornet/Configuration_adv.h +++ b/config/examples/Artillery/Hornet/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h index 3353fc3a24e..02c49ebfc6d 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h index f4edf08eb78..740b2918350 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h index e6e42cd2584..5a88ac830c0 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h index 46380f8c54e..b39ed2c02ca 100644 --- a/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index fbf71cb5936..8012e7db1f6 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h b/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h index defbd8b5993..f3618da8b5e 100644 --- a/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default - BLTouch/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index ff42b53ad51..b081907b33e 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h index 2032a8a11e2..7c9c9dbe278 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/BIQU/B1 SE/Configuration_adv.h b/config/examples/BIQU/B1 SE/Configuration_adv.h index 6a803496266..f3c415e89d4 100644 --- a/config/examples/BIQU/B1 SE/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index 520db16f23f..0735bb27fe3 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/BIQU/BX/Configuration_adv.h b/config/examples/BIQU/BX/Configuration_adv.h index ce73afa4807..e07a5986824 100644 --- a/config/examples/BIQU/BX/Configuration_adv.h +++ b/config/examples/BIQU/BX/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/BIQU/Hurakan/Configuration_adv.h b/config/examples/BIQU/Hurakan/Configuration_adv.h index fac51bfa2d0..38fafc8a8e3 100644 --- a/config/examples/BIQU/Hurakan/Configuration_adv.h +++ b/config/examples/BIQU/Hurakan/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/BIQU/Thunder Standard/Configuration_adv.h b/config/examples/BIQU/Thunder Standard/Configuration_adv.h index eba9b15290b..3162bd43ce9 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration_adv.h +++ b/config/examples/BIQU/Thunder Standard/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index e843fe13396..c84d51378f3 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 1054a60b5f9..965a7f02efb 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index e843fe13396..c84d51378f3 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/CNC/miniRambo/Configuration_adv.h b/config/examples/CNC/miniRambo/Configuration_adv.h index d1461fc7f1d..75f2378a082 100644 --- a/config/examples/CNC/miniRambo/Configuration_adv.h +++ b/config/examples/CNC/miniRambo/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index 91483cb52d0..f798640ac0b 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/CTC/Bizer/Configuration_adv.h b/config/examples/CTC/Bizer/Configuration_adv.h index b1481c43a0e..9b12b44898d 100644 --- a/config/examples/CTC/Bizer/Configuration_adv.h +++ b/config/examples/CTC/Bizer/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h index 46380f8c54e..b39ed2c02ca 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 5ad60bc533d..be2050df227 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Copymaster3D/300/Configuration_adv.h b/config/examples/Copymaster3D/300/Configuration_adv.h index 46380f8c54e..b39ed2c02ca 100644 --- a/config/examples/Copymaster3D/300/Configuration_adv.h +++ b/config/examples/Copymaster3D/300/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Copymaster3D/400/Configuration_adv.h b/config/examples/Copymaster3D/400/Configuration_adv.h index 46380f8c54e..b39ed2c02ca 100644 --- a/config/examples/Copymaster3D/400/Configuration_adv.h +++ b/config/examples/Copymaster3D/400/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Copymaster3D/500/Configuration_adv.h b/config/examples/Copymaster3D/500/Configuration_adv.h index 46380f8c54e..b39ed2c02ca 100644 --- a/config/examples/Copymaster3D/500/Configuration_adv.h +++ b/config/examples/Copymaster3D/500/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10 Max/Configuration_adv.h b/config/examples/Creality/CR-10 Max/Configuration_adv.h index ae8669734ba..ebbf5145d92 100644 --- a/config/examples/Creality/CR-10 Max/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Max/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 46d5f8326de..ce2e1b3310c 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 655d03cb0aa..7c3ce64c914 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index e51ab3b88e4..4d4ffebcd73 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index ef518c62f21..5a479a38977 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index fa9304c1795..2d0f3bfaa5b 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index ce933c749ae..fc6ced7bcb1 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h index f4049d3e12c..279d6685d11 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index fa9304c1795..2d0f3bfaa5b 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h index 12c469da426..a4adcc0e863 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h index dda5ae87ec3..1bdca17cadc 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 2af8db4c355..60e8c378a62 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h index 401ab95348f..9388bffc7d8 100644 --- a/config/examples/Creality/CR-10 V3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 9871674c8f3..f16e70b9731 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 347427e9c00..8cb8ba76f0e 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index f98ab0d0ee0..c471fcc8274 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10S Pro/Configuration_adv.h b/config/examples/Creality/CR-10S Pro/Configuration_adv.h index 77c643d513a..59c20bb8c56 100644 --- a/config/examples/Creality/CR-10S Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-10S Pro/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index 1a862a4194c..46adb33902a 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h index cfdbd2d8268..63a4d5f316b 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 9871674c8f3..f16e70b9731 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index a651b8acd6d..ba35df65beb 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index db64cbc72fa..781ebda8983 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h index e385b476a2b..1e9ff7fdb09 100644 --- a/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 4d9945393e5..62b4f9eb058 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 8318a5c6312..b220261d4f5 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h index 810f2383732..cb5f3b93723 100644 --- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-20/Stock/Configuration_adv.h b/config/examples/Creality/CR-20/Stock/Configuration_adv.h index 810f2383732..cb5f3b93723 100644 --- a/config/examples/Creality/CR-20/Stock/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Stock/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index 6a1c8b65ad8..798ab0914ef 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index c6011418e8b..f649a9e0300 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 6d8768281e5..54f0a6645e6 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h index 3fb19938091..8e591eaf06e 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h index ac9b431daa7..b7171f18d0c 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index e60e06a82fc..84b7566f3cc 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h index 43603fe3dab..94fe3d69019 100644 --- a/config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index f6e0ac2993c..d8bb1cef169 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h index df6e3a33d31..b6aaa59213e 100644 --- a/config/examples/Creality/Ender-3 Neo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Neo/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index f31932a8e2a..2a0e7d948d1 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index cadec7581b4..995d5e727fa 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index cadec7581b4..995d5e727fa 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index d4116761dd1..07a82f49ade 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index a48198bfc44..c3329c2d9e3 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h index 846099c211f..8e90ca7309c 100644 --- a/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index de6f3e055eb..b3f4c25410a 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index a4874523a30..7b65d12f450 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427 - BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427 - BLTouch/Configuration_adv.h index 9bcce476182..8dc9534cdad 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427 - BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427 - BLTouch/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index 588c5f7e489..4ee5677295d 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h index 96b27d81508..790cf440234 100644 --- a/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h index 96b27d81508..790cf440234 100644 --- a/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1 Pro/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h index 7adebe69cf0..bbcf235452d 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h index 83164911a65..dca92a11515 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 14e69e1fa61..aea6f1f89b5 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration_adv.h index b1dfd53125d..63efbfe80f4 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h index 314d332fb67..acb093fee44 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h index db711d75c8a..150acf2e2b1 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration_adv.h index b44a8ff72aa..73680fcc280 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration_adv.h index 58473cb5d90..94cc93d797b 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration_adv.h index e8c73d19bec..c82a53391af 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration_adv.h index 1f03fbd466d..d2ed2febcfe 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h index 3e7461393cc..68a7cb06b50 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h index a3b0b2a3d0c..3ab6317352b 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h index a40f85c82f2..a99297eca25 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h index 76b6fc81aad..6a42296a069 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index da9a58b6785..b1602e9e0f2 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h index 145bf149c4d..1baf6407d61 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index 6bee638eb83..296ba6778ce 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index f7cfc1d0c42..15034ba2d58 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index 6c0a8f2547f..fc2dd2883e8 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index f7cfc1d0c42..15034ba2d58 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index d61373227ce..1be666a373f 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index c861d187890..f55c867460d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index c861d187890..f55c867460d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 5ce15310317..843ad62ddb4 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 4367fb2abae..fc6270476fc 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h b/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h index 846099c211f..8e90ca7309c 100644 --- a/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/Creality free-runs/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index de6f3e055eb..b3f4c25410a 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 9779834e268..c74787c6d2b 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index 588c5f7e489..4ee5677295d 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 1e3d9d0a406..e2c24157ea2 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 1e3d9d0a406..e2c24157ea2 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h index 1972250b3c7..5da033f11f8 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 1e3d9d0a406..e2c24157ea2 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 1e3d9d0a406..e2c24157ea2 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index bee3a210679..fefc74af9e5 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index b83370dd898..2eff282a440 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index 05d5f3ef304..40f0d1e7e39 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index 9f02204b410..dfc05144eaf 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index d8f6d9116de..d0349455af1 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 9a9b62bd1fb..ee566b35259 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h index 5bc0113ca91..049c1b24b9d 100644 --- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h index cb40e98f6cc..57b655bb2a1 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h index eef099e8075..eb4b973bc46 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 095b41ac22a..34c38487e0a 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index d94f794b4ae..7c82de2dea3 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index 338734e8ca7..6711f154121 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h index a387d81d570..0013a1b2645 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index 2db3c112450..9a1816f9855 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index ace6c60d582..df0708f734c 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index 1d909038436..3be750a5a33 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-5 S1/Configuration_adv.h b/config/examples/Creality/Ender-5 S1/Configuration_adv.h index 0afed5a83fe..e5eaa2c8ff8 100644 --- a/config/examples/Creality/Ender-5 S1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 S1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 095b41ac22a..34c38487e0a 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 7a2a5d09866..05e643824f1 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index fe1e196a132..26552ebd1c1 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index c5b4b0da773..d3c5c1bbb9a 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h index 10c1bf06c1a..71e9ac04c62 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h b/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h index 91a817ddebc..819f95d0ffd 100644 --- a/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/Creality free-runs/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index dfcc627ed34..fa215459970 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h index dd2a8ebac18..801b2c1077e 100644 --- a/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index a57cc0638b0..1b772b9442e 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index 1c515ef294f..0f929862b89 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 8f8195dc42b..b0261882d8a 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index ebb66b3ca62..194989bce33 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 98a4c76ec99..5da553b6a2b 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h index 9f77e3d6f85..eceda3b5126 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Eazao/Zero/Configuration_adv.h b/config/examples/Eazao/Zero/Configuration_adv.h index 0e161d3fc03..33b52cbd290 100644 --- a/config/examples/Eazao/Zero/Configuration_adv.h +++ b/config/examples/Eazao/Zero/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index bdfa3a3b766..978e64c3c0b 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Elegoo/Neptune 2/Configuration_adv.h b/config/examples/Elegoo/Neptune 2/Configuration_adv.h index 238ce0d8316..1247cc78cc1 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration_adv.h +++ b/config/examples/Elegoo/Neptune 2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index 280990cae82..feb256d1791 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index 94993aacf90..3c1c3863885 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index ca8ded51bc9..ebb5af739e0 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 79a9cd79b34..d6195a13572 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index e6f460e51e0..13eb0bb945a 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index e83bf7717cf..ef46a59ce7c 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index e83bf7717cf..ef46a59ce7c 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 19cc17a85a9..36a1d97e4f9 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 61ce631cb1e..c2fde2d6216 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index 9e7ce8369b7..bf0de5be968 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index b6b0631d7b6..5c0312d6c4f 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/FoamCutter/generic/Configuration_adv.h b/config/examples/FoamCutter/generic/Configuration_adv.h index 6a5cd91c1fd..8430ca350df 100644 --- a/config/examples/FoamCutter/generic/Configuration_adv.h +++ b/config/examples/FoamCutter/generic/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/FoamCutter/rcKeith/Configuration_adv.h b/config/examples/FoamCutter/rcKeith/Configuration_adv.h index 6a5cd91c1fd..8430ca350df 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration_adv.h +++ b/config/examples/FoamCutter/rcKeith/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h index ead477dd4d0..c8a8cd86448 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 97e3d95c0c2..19d54bd62a3 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index af0c9c2b4b2..76c8002fee8 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 8e9912a40c4..345abe5ea47 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index 2be6b1500f5..fc8f7127084 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index 80ddd3586f1..b90f2b23d65 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index 80ddd3586f1..b90f2b23d65 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index 8e9912a40c4..345abe5ea47 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index 80ddd3586f1..b90f2b23d65 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index 80ddd3586f1..b90f2b23d65 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index f3094d9ab66..2752c0f33e4 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index f3094d9ab66..2752c0f33e4 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index f3094d9ab66..2752c0f33e4 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index f36c0db6f48..021956c051f 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index f36c0db6f48..021956c051f 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index f36c0db6f48..021956c051f 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index f06f84d8c72..235de021c8d 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index e6f460e51e0..13eb0bb945a 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index f36c0db6f48..021956c051f 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/GT2560/Configuration_adv.h b/config/examples/Geeetech/GT2560/Configuration_adv.h index d5d0a58a8ec..398eec9147e 100644 --- a/config/examples/Geeetech/GT2560/Configuration_adv.h +++ b/config/examples/Geeetech/GT2560/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h index d5d0a58a8ec..398eec9147e 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index f06f84d8c72..235de021c8d 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 64143b968d3..fd7aa5a2add 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index e6f460e51e0..13eb0bb945a 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 4c0997badee..38b419fde23 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index 7cb2eb0f20d..07833ce26bf 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h index d5d0a58a8ec..398eec9147e 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h index d5d0a58a8ec..398eec9147e 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 8e9912a40c4..345abe5ea47 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 8e9912a40c4..345abe5ea47 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index a9a7eac2828..ff16cc67f23 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Hictop/3DP-17/Configuration_adv.h b/config/examples/Hictop/3DP-17/Configuration_adv.h index 109fcfa8ce1..8c6e339fcd2 100644 --- a/config/examples/Hictop/3DP-17/Configuration_adv.h +++ b/config/examples/Hictop/3DP-17/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index a0985fa5a11..032471e317b 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index a7d03b8afb1..e4525ea6dfe 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -211,16 +211,17 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin + //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false + //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 729d8cbfa62..2e78af9ca71 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -217,18 +217,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/JGAurora/A3/Configuration_adv.h b/config/examples/JGAurora/A3/Configuration_adv.h index d5d0a58a8ec..398eec9147e 100644 --- a/config/examples/JGAurora/A3/Configuration_adv.h +++ b/config/examples/JGAurora/A3/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index e32f3de6821..82d61ea14a7 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 632ba8caa1e..9d0eaf1cab6 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -217,18 +217,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index 4805c30247a..9fca5e475d7 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index f3d45f1eb79..b8967967303 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Kingroon/KP3S/Configuration_adv.h b/config/examples/Kingroon/KP3S/Configuration_adv.h index d5d0a58a8ec..398eec9147e 100644 --- a/config/examples/Kingroon/KP3S/Configuration_adv.h +++ b/config/examples/Kingroon/KP3S/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h index 4c7e309b9a7..f99b3e15551 100644 --- a/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h +++ b/config/examples/Kingroon/KP3S_Pro/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h b/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h index dcbcca745f1..3e4fa7245cd 100644 --- a/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h +++ b/config/examples/Kingroon/KP5L-DIY/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index 53a101bb797..49f81829310 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Longer/LK5/Configuration_adv.h b/config/examples/Longer/LK5/Configuration_adv.h index 036aa826330..f6f7d9fe330 100644 --- a/config/examples/Longer/LK5/Configuration_adv.h +++ b/config/examples/Longer/LK5/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index 56dfdff89ae..b5a9ca2cc1b 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index d04bf84317b..6c7bcb77835 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index 963dff6b70b..602fb54050d 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index acd0fcde87e..cda35febb24 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h index c2c25347c51..7654b2537ee 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 331d40de621..520d442f507 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Malyan/M180/Configuration_adv.h b/config/examples/Malyan/M180/Configuration_adv.h index d5d0a58a8ec..398eec9147e 100644 --- a/config/examples/Malyan/M180/Configuration_adv.h +++ b/config/examples/Malyan/M180/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index de10d89c68d..4ea3e68c2d2 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Micromake/C1/basic/Configuration_adv.h b/config/examples/Micromake/C1/basic/Configuration_adv.h index 1b6dae394f7..a4a36a8fc23 100644 --- a/config/examples/Micromake/C1/basic/Configuration_adv.h +++ b/config/examples/Micromake/C1/basic/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 1aa42564d64..908e77a8387 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index d5d0a58a8ec..398eec9147e 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Mks/Robin_Lite3/Configuration_adv.h b/config/examples/Mks/Robin_Lite3/Configuration_adv.h index 61435c9b655..b460b0a1e31 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration_adv.h +++ b/config/examples/Mks/Robin_Lite3/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Mks/Robin_Pro/Configuration_adv.h b/config/examples/Mks/Robin_Pro/Configuration_adv.h index d5d0a58a8ec..398eec9147e 100644 --- a/config/examples/Mks/Robin_Pro/Configuration_adv.h +++ b/config/examples/Mks/Robin_Pro/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 1140c8eed65..1ef84ed7e33 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 8934280f08b..4066b914c69 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index 6263b89834c..d7dd289eca7 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h index fe2bf0a3d51..5bc5fe91599 100644 --- a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h +++ b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h index f24d0825247..9198393bc33 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h index e425a00650f..f36b6df91f7 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 08620f4e1ee..86ef9ff933c 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index 5d1e6882e6a..9da35843802 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h b/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h index d5d0a58a8ec..398eec9147e 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h b/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h index d5d0a58a8ec..398eec9147e 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Printrbot/Simple_Metal_RevF6/Configuration_adv.h b/config/examples/Printrbot/Simple_Metal_RevF6/Configuration_adv.h index 63aea9ad21c..58eaf7b7ed4 100644 --- a/config/examples/Printrbot/Simple_Metal_RevF6/Configuration_adv.h +++ b/config/examples/Printrbot/Simple_Metal_RevF6/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index c86656f576d..041cbc87ef8 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 5bd197314c6..e1cea5e32af 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index d23cacf7615..a72a1657353 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 0196c69cd29..78add2e9d41 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index e6f460e51e0..13eb0bb945a 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index cceaa0b2259..ef96c2e0bf1 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index cceaa0b2259..ef96c2e0bf1 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index cceaa0b2259..ef96c2e0bf1 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/RepRapPro/Huxley/Configuration_adv.h b/config/examples/RepRapPro/Huxley/Configuration_adv.h index d5d0a58a8ec..398eec9147e 100644 --- a/config/examples/RepRapPro/Huxley/Configuration_adv.h +++ b/config/examples/RepRapPro/Huxley/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/RepRapWorld/Megatronics/Configuration_adv.h b/config/examples/RepRapWorld/Megatronics/Configuration_adv.h index 7e5f8f29aa6..ab3ea62aa3a 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration_adv.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/RepRapWorld/Minitronics11/Configuration_adv.h b/config/examples/RepRapWorld/Minitronics11/Configuration_adv.h index e385b476a2b..1e9ff7fdb09 100644 --- a/config/examples/RepRapWorld/Minitronics11/Configuration_adv.h +++ b/config/examples/RepRapWorld/Minitronics11/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h index 5035342e673..f7cf862a6c3 100644 --- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h +++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 9e8614cfaa8..a0ba5e82568 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Robo3D/R1+/Configuration_adv.h b/config/examples/Robo3D/R1+/Configuration_adv.h index d5d0a58a8ec..398eec9147e 100644 --- a/config/examples/Robo3D/R1+/Configuration_adv.h +++ b/config/examples/Robo3D/R1+/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Rolohaun/Rook MK1/Configuration_adv.h b/config/examples/Rolohaun/Rook MK1/Configuration_adv.h index 5c8b8c7baad..63c535766f8 100644 --- a/config/examples/Rolohaun/Rook MK1/Configuration_adv.h +++ b/config/examples/Rolohaun/Rook MK1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index b3b792db709..614e3fb7aa0 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 92b2b9fb3bb..985cbec5a2b 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 53fc3f50e4e..f40cc0bf147 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/STM32/STM32F103RE/Configuration_adv.h b/config/examples/STM32/STM32F103RE/Configuration_adv.h index d5d0a58a8ec..398eec9147e 100644 --- a/config/examples/STM32/STM32F103RE/Configuration_adv.h +++ b/config/examples/STM32/STM32F103RE/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Simax/Mi-M200/Configuration_adv.h b/config/examples/Simax/Mi-M200/Configuration_adv.h index 283565b7f66..ccd7f76c5b8 100644 --- a/config/examples/Simax/Mi-M200/Configuration_adv.h +++ b/config/examples/Simax/Mi-M200/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index d8fdcd12216..7ebad45589a 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 189ad0440da..5db1dc71a51 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 37564e77e57..8845883d43c 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 26be54bb93d..5f70f05ac3f 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index b50f3cb4840..0d50f00baa9 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index c71a981e01b..4f733bebd2b 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Sovol/SV-02/Configuration_adv.h b/config/examples/Sovol/SV-02/Configuration_adv.h index 9eed52ab57a..75b631064fc 100644 --- a/config/examples/Sovol/SV-02/Configuration_adv.h +++ b/config/examples/Sovol/SV-02/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Sovol/SV-03/Configuration_adv.h b/config/examples/Sovol/SV-03/Configuration_adv.h index e1f5fa19bea..3775df329d7 100644 --- a/config/examples/Sovol/SV-03/Configuration_adv.h +++ b/config/examples/Sovol/SV-03/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Sovol/SV-05/Configuration_adv.h b/config/examples/Sovol/SV-05/Configuration_adv.h index 65553408379..75472349b00 100644 --- a/config/examples/Sovol/SV-05/Configuration_adv.h +++ b/config/examples/Sovol/SV-05/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Sovol/SV-06/Configuration_adv.h b/config/examples/Sovol/SV-06/Configuration_adv.h index eba791d34ba..81461e25378 100644 --- a/config/examples/Sovol/SV-06/Configuration_adv.h +++ b/config/examples/Sovol/SV-06/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index 94c40eb4e04..3ef0717249b 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Sunlu/T3/Configuration_adv.h b/config/examples/Sunlu/T3/Configuration_adv.h index 0f68b0f2b68..ced0d748255 100644 --- a/config/examples/Sunlu/T3/Configuration_adv.h +++ b/config/examples/Sunlu/T3/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index 266d4aacd97..7288da05869 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index e3e25d65f38..368bfc13f59 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index a8f660ecee3..ae6a2035ca7 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h index 4a643b7965d..b7da4d763f0 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h index c66c7021018..2e625a07cc4 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 503da431283..c8e4e61ef89 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h index 503da431283..c8e4e61ef89 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h index 48b96f45289..adf9b44a111 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 90c71b86871..67382f72ee5 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h index 785265875f9..5b8afd5cb23 100644 --- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h +++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Tronxy/X1/Configuration_adv.h b/config/examples/Tronxy/X1/Configuration_adv.h index d5d0a58a8ec..398eec9147e 100644 --- a/config/examples/Tronxy/X1/Configuration_adv.h +++ b/config/examples/Tronxy/X1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index ed04b9803dd..91e28f4c42b 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h index 7e452e0152b..b7622bbb378 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h index b9e322c1f81..ebfb4681d98 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Tronxy/X5S/Configuration_adv.h b/config/examples/Tronxy/X5S/Configuration_adv.h index d5d0a58a8ec..398eec9147e 100644 --- a/config/examples/Tronxy/X5S/Configuration_adv.h +++ b/config/examples/Tronxy/X5S/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index f63d667733e..3839111ad60 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index e92042b4b7e..1ff9000dc3a 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Tronxy/XY100/Configuration_adv.h b/config/examples/Tronxy/XY100/Configuration_adv.h index d5d0a58a8ec..398eec9147e 100644 --- a/config/examples/Tronxy/XY100/Configuration_adv.h +++ b/config/examples/Tronxy/XY100/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h index 2c8653bffa5..e1d14911031 100644 --- a/config/examples/Tronxy/XY2-Pro/Configuration_adv.h +++ b/config/examples/Tronxy/XY2-Pro/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Turnigy/Fabrikator/Configuration_adv.h b/config/examples/Turnigy/Fabrikator/Configuration_adv.h index cbd638e0064..3bf65129530 100644 --- a/config/examples/Turnigy/Fabrikator/Configuration_adv.h +++ b/config/examples/Turnigy/Fabrikator/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index f548b0d2767..cc1bb8fbfeb 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index fb2b59a695e..6185055cdeb 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index fb2b59a695e..6185055cdeb 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index fb2b59a695e..6185055cdeb 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Two Trees/SP-5_V3/Configuration_adv.h b/config/examples/Two Trees/SP-5_V3/Configuration_adv.h index 55d69a42ece..4497fe6158a 100644 --- a/config/examples/Two Trees/SP-5_V3/Configuration_adv.h +++ b/config/examples/Two Trees/SP-5_V3/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h index 864ff4f8bff..5df13773794 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index 52910be5d51..bb6e94dab67 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index 2572d67a523..9a56e7f76bd 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 4321252bd35..94beba0d00e 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index 6d0d0543147..cc589151928 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h index c6e35775d32..fff53d06551 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h index e2aecacc160..8b2d30e3d3d 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index cc8465ddc74..728c1954852 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index f34d3bc533b..184a4a9e17e 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h index de53ed68a8a..704e557e012 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 167231ca2cb..3b586c9db0c 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h index be5b36deaed..e34bb73d467 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h @@ -220,18 +220,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 98cf72da700..1ef3426b5eb 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -220,18 +220,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 2188c5dbe44..d7dac47f838 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 2188c5dbe44..d7dac47f838 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index ad6cc37f8f6..a0c71630325 100644 --- a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 8cee0998ac8..82254d99a75 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index 8c9cc5e1926..42b5a09ed4d 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index cfa29dd644c..3395387fdc7 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 9492c94600f..f106b0b0a59 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 6faefc241a2..a141eb52763 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h index d5d0a58a8ec..398eec9147e 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Weedo/Tina2/V2/Configuration_adv.h b/config/examples/Weedo/Tina2/V2/Configuration_adv.h index ff78d56a6df..04919e291b1 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Weedo/Tina2/V3/Configuration_adv.h b/config/examples/Weedo/Tina2/V3/Configuration_adv.h index ff78d56a6df..04919e291b1 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V3/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index 42657c08bdd..2d3296b3016 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index eafa58b978f..5911faec68e 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 571be570533..1d9994573a0 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index 9a65530a7b1..9100cc5645e 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 6ae8b5606b2..1aeeae5ca81 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 44bc82ba5fc..f7eb77fad60 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index bc774969ed3..6028251331e 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 721545623bb..43b03a8cca7 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 721545623bb..43b03a8cca7 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index 0f08bd892fc..66c1b3429e7 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h index 46380f8c54e..b39ed2c02ca 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index a82b9ae127e..4efd5cd02bf 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index 56c56c28b2b..4c20d8553f1 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 00d3749b236..53b5d5889b4 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 00d3749b236..53b5d5889b4 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 3592a6d9884..1573cb41375 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 6af36ede954..3e68e73523f 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index 6af36ede954..3e68e73523f 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index 6af36ede954..3e68e73523f 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index 6af36ede954..3e68e73523f 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 7e8e5e35320..2311c9c1889 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index ae0275eb59e..dcd0a5c9dee 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index fca2f9103ef..99cca873782 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 8d666944d6b..c2a933612a9 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 4132b32a9b2..c93c71896a9 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/Velleman/K8800/Configuration_adv.h b/config/examples/delta/Velleman/K8800/Configuration_adv.h index afdf948b4d0..a1bc3f6c97b 100644 --- a/config/examples/delta/Velleman/K8800/Configuration_adv.h +++ b/config/examples/delta/Velleman/K8800/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 3592a6d9884..1573cb41375 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index e4b09953c1f..1be751f5977 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index d5d0a58a8ec..398eec9147e 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/kossel_pro/Configuration_adv.h b/config/examples/delta/kossel_pro/Configuration_adv.h index d5d0a58a8ec..398eec9147e 100644 --- a/config/examples/delta/kossel_pro/Configuration_adv.h +++ b/config/examples/delta/kossel_pro/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 53d9ced72c1..4f3ad9d3d27 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 42d7870f40c..c94739555ba 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h index 1e9b0d66458..1f0f9c5ed74 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index eb7816c3482..1ba2914c03a 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index f9e5442cf3d..3370699c912 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan) diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 324404ce231..bc8667eeee5 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -211,18 +211,18 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) + #if DISABLED(PIDTEMPCHAMBER) + #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #if ENABLED(CHAMBER_LIMIT_SWITCHING) + #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS + #endif + #endif + //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) //#define CHAMBER_FAN_INDEX 2 // Index of a fan to repurpose as the chamber fan. (Default: first unused fan)