MOSI & MISO pins ERROR

[Giftia]

I'm making it by your schematics but not works, finally i found there is something wrong in MOSI & MISO pins, it seems like be MOSI = 13 & MISO = 12, may be my "arduino_pins.h" is not the currect verson or?😂

[Giftia]

My wiring test:

[dsmacq]

Hello, when you programmed your board can you confirm that you connected GPIO0 and GPIO 15 to GND? Then disconnected them after that when using your FTP client to connect to "SD Card" WiFi.

I cannot get this board to connect (I'm getting a timeout issue) with a generic ESP8266 board (not ESP8266MOD).

I selected generic esp8266 from the board library.

Also the two IP addresses are the same but seem to work based on Neutrinos sketch, 192.168.12.7. I would have thought the last octet would not be "7" but rather "8" or something other than "7".

Also, for the FTP client is a "user" entered? I would appreciate all the details I can get about the FTP client details I need to enter.

Any help from anyone would be much appreciated!

[dsmacq]

Ok I got the wiring correct and can connect to the WiFi and can FTP files (to my phone) but when I refresh and connect to the server again to get more files I get this message