From b7a6f11545d728c1c3c923b6e1229d9dbe6f3386 Mon Sep 17 00:00:00 2001 From: Allison Howard <104779614+alhoward0@users.noreply.github.com> Date: Wed, 3 Apr 2024 14:12:13 -0500 Subject: [PATCH] Update OpenUAStwo.md --- docs/Design/OpenUAStwo.md | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/docs/Design/OpenUAStwo.md b/docs/Design/OpenUAStwo.md index 1c2bc3c7..8fe20fca 100644 --- a/docs/Design/OpenUAStwo.md +++ b/docs/Design/OpenUAStwo.md @@ -3,10 +3,9 @@ The OpenUAS 2.0 model has a major focus on the use of 3D printed parts to create a framework that can be easily modfided and printed to meet the needs for anyone wanting to use the model. It has an overall weight of 4.07 lbs, keeping it lightweight. It is also adaptable to store more electronics than OpenUAS 1.0 and other UAVs. ## Solidworks Assembly - -![Solidworks complete](./OpenUAS2.0_Solidworks.png) +Solidworks complete # -![OpenUAS 2.0 Completed](./0221231729.png) +OpenUAS 2.0 Completed ## Spring 2022 Design Changes @@ -67,4 +66,4 @@ The changes made during this round were needed for fine tuning of components for After some observions of other air crafts we noticed that the motors for the propeller may benfit from an angled motor instead of a completly straight faceing. We angled our motor to the right and directed down of the model. In order to do this we added nuts to the motor bolts to create the spacing for the angle. This inculded four mounting points and a total of 5 nuts. Two of the nuts were placed on the upper right corner and the upper left corner. ## Test Flight -![OpenUAS 2.0 Flight Test](./0323231752.jpg) +OpenUAS 2.0 Flight Test