Skip to content

Latest commit

 

History

History
433 lines (313 loc) · 15.4 KB

OpenPGP-card.md

File metadata and controls

433 lines (313 loc) · 15.4 KB

OpenPGP Card

The OpenPGP Card is an ISO/IEC 7816-4/-8 compatible smart card implementation that is integrated with many GnuPG functions. Using this smart card, various cryptographic tasks (encryption, decryption, digital signing/verification, authentication etc.) can be performed.

The cards come in various form factors ranging from the standard size ID-1, over ID-1 with cut-outs for ID-000 (i.e. SIM card size), which together with an USB card reader allows to build a do-it-yourself crypto stick, to the Nitrokey USB security key.

They implement the OpenPGP Card specification which evolved compatibly from v1.0 in 2003, via v1.1 in 2004, v2.0 which was released in 2009, to v3.4.1 in 2020.

Version 1.0 of the specification is mostly of theoretical interest, as most - if not all - cards adhere to version 3.

All versions allow storing card holder details as well as generating and storing up to three RSA key pairs on the card.

While the 1.x version only supported 1024-bit RSA keys and no certificates, version 2.0 allows for RSA keys up to 4096 bits (requires GnuPG 2.0.18+) and optionally an X.509 card holder certificate for the AUT key on the card. Version 3.0 introduced support for ECC.

Other changes were:

  • V1.1 brought 4 optional DOs for private use with different access conditions
  • V2.0 brought optional support for
    • card reset functionality (life cycle management)
    • SecureMessaging
    • changeable algorithm attributes
    • other algorithms than RSA (not specified)
    • Removal of PW2 ("Encryption PIN") present in v1.1. In v2.0 only "Admin PIN" and "User PIN" are specified. Furthermore, v2.0 spec defines "user consent" capabilities for signature key.

Where/How to get one?

OpenPGP Cards / Nitrokeys can be obtained from vendors like e.g.

State of OpenSC support

OpenPGP Card v1.0 /1.1 is deprecated but should work since OpenSC 0.9.1. Starting with OpenSC 0.12.2, OpenSC supports reading the OpenPGP Card v2.0 too. Since OpenSC 0.13 full write support for OpenPGP Card 2 is supported. Support for OpenPGP Card 3 was introduced later.

Usage

To apply this usage to Gnuk, the patch above is needed. Basically, usage between general OpenPGP Card (for example Nitrokey) and Gnuk are the same, except some differences will be noted below.

Display user info

Use openpgpg-tool.

2. Read and write data object (DO)

Use opensc-explorer. For example, you want to change card holder name:

  1. Run opensc-explorer

  2. Verify Admin PIN by this command

    verify CHV3 3132333435363738

    in which @CHV3@ means Admin PIN is to be verified (User PIN will be CHV1 or CHV2) and @3132333435363738@ is ASCII-decoded hex string of PIN code "12345678".

  3. Put data to 005B DO, the DO containing card holder name:

    do_put 005B "Quan"
  4. Remove it afterwards:

    do_put 005B ""
  5. Or change user PIN to "654321":

    change CHV1 31:32:33:34:35:36 "654321"

    Where @31:32:33:34:35:36@ is hex string of ASCII-decoded old PIN “123456”.

    Reading DO content is not as straightforward as writing, because the DOs are nested in each other. For example, to read 005B DO, you have to go through 0065 DO:

    OpenSC [3F00]> cd 0065
    OpenSC [3F00/0065]> cat 005B
    00000000: 51 75 61 6E Quan

    Note: We cannot delete DO content with delete/rm< command. Technical reason: The OpenSC framework doesn't pass the full path of file to OpenPGP driver, so the driver cannot identify the DO to be deleted.

Generating keys

Key generation via openpgp-tool

openpgp-tool --verify CHV3 --pin 12345678 --gen-key 3
openpgp-tool --verify CHV3 --pin 12345678 --gen-key 1 --key-len 1024

In which, --genkey 3 means that we're generating key with ID=3. The three keys in the have these IDs: Singing key: 1, Decryption key: 2, Authentication: 3.

--key-length 1024 means that the key is 1024-bit. We can specify bit length: 1024, 2048, 3072, 4096. If this option is absent, default key length 2048-bit is used. +Gnuk:+ Gnuk only supports 2048-bit key, so don’t specify --key-length option, you also have to delete old key before generating or import new one.

openpgp-tool --verify CHV3 --pin 12345678 --del-key 3

Key generation via pkcs15-init

pkcs15-init --delete-objects privkey,pubkey --id 3 --generate-key rsa/2048 --auth-id 3 --verify

There is limitation: pkcs15-init requires new key length to be the same as existing key. To generate key with different key length, openpgp-tool is recommended.

pkcs15-init also requires to explicitly remove existing key/object. That's why we have --delete-objects privkey,pubkey --id 3 in the command (though it has no effect to Nitrokey, which does not support deleting key, but support overwriting key).

Delete key (Gnuk)

Deleting key is supported by Gnuk only. Nitrokey does not. Example to delete 3rd (authentication) key:

openpgp-tool --verify CHV3 --pin 12345678 --del-key 3

or

pkcs15-init --delete-objects privkey,pubkey --id 3

If you want to delete key from Nitrokey, the only option is to erase card (all things will be deleted).

Erase card (Nitrokey)

Erasing card is supported by Nitrokey (or general OpenPGP Card v2+) only. Gnuk does not support.

openpgp-tool --erase

or

pkcs15-init --erase-card

Import key resp. certificate

Only certificate

pkcs15-init --store-certificate mycert.pem --id 3

In which the PEM file is extracted from p12 using OpenSSL (key is stripped out):

openssl pkcs12 -in myprivate.p12 -nokeys -out mycert.pem

Note that the OpenPGP Card v2 contains only 1 certificate, so the ID to store is always 3.

Only key

pkcs15-init --delete-objects privkey,pubkey --id 3 --store-private-key mykey.pem --auth-id 3 --verify-pin --id 3

In which the PEM file is extracted from a p12 file using OpenSSL (certificate is stripped out):

openssl pkcs12 -in myprivate.p12 -nocerts -out mykey.pem

Pairs of key & certificate from P12 file

pkcs15-init --delete-objects privkey,pubkey --id 3 --store-private-key myprivate.p12 --format pkcs12 --auth-id 3 --verify-pin

Notes:

  • In current version, pkcs15-init tool is pretty silent, so you may not recognize if the operation is successful or not. You should run pkcs15-init in debug mode (set environment variable OPENSC_DEBUG=3).
  • In p12 file, the pkcs15-init detect X.509 certificates in hierarchy, in which only the first found certificate need to be imported. But pkcs15-init then try to do with all, so the later imports will fail. You can see some error messages due to this failure, but it is OK because the main certificate has been imported successfully.
  • The certificate can be used to encrypt email. But to make decryption work, the corresponding private key need to be import to “Decryption Key” (ID=2) as well (normally, it is imported to “Authentication Key”, which has the same ID=3 as certificate).
pkcs15-init --delete-objects privkey,pubkey --id 2 --store-private-key mykey.pem --auth-id 3 --verify-pin --id 2

Delete certificate

pkcs15-init --delete-objects cert --id 3

OpenSC driver details

OpenPGP Cards only implement a small subset of the ISO/IEC 7816-4/-8 standard. Most importantly, they do not use a file system to store the application specific data. Instead the data stored for the application is accessible via Data Objects (DO) only.

These DOs come in two variants:

  • simple DOs that do not have a meaningful internal structure
  • complex DOs that have a well-known internal structure which is encoded according to ASN.1 BER rules

In order to make OpenPGP Cards accessible for OpenSC's PKCS15 functions, the OpenPGP Card driver in OpenSC simulates a file system.

It does so by reading the well-known DOs on the card and converting them according to this logic:

  • simple DOs are treated as wEFs
  • complex DOs are treated as DFs with their elements as children. As complex DOs can also contain complex DOs as elements, this conversion is done recursively, leading to a multi-level hierarchy.

This file-system is currently read-only, hence any operation writing to the card, i.e. personalization and key generation, needs to be done via GnuPG.

Examples

Here's an example of a card as seen via GnuPG:

$ gpg --card-edit
Application ID ...: D2760001240101010001000004D50000
Version ..........: 1.1
Manufacturer .....: PPC Card Systems
Serial number ....: 000004D5
Name of cardholder: John Doe
Language prefs ...: en
Sex ..............: male
URL of public key : [not set]
Login data .......: johndoe
Private DO 1 .....: [not set]
Private DO 2 .....: [not set]
Signature PIN ....: forced
Key attributes ...: 1024R 1024R 1024R
Max. PIN lengths .: 254 254 254
PIN retry counter : 0 0 0
Signature counter : 5
Signature key ....: 6B71 349B 27F0 370A A964  9BD4 967C B116 BDFA 3CDD
      created ....: 2010-03-07 09:17:36
Encryption key....: 3A2F 8637 C325 AAEE 18DD  88F1 AC40 47D4 2764 F212
      created ....: 2010-03-07 09:18:25
Authentication key: F49C 7334 2AEC B098 60C9  04C7 9BFC 9789 DF31 19A9
      created ....: 2010-03-07 09:18:25
General key info..:
pub  1024R/BDFA3CDD 2010-03-07 John Doe <[email protected]>
sec>  1024R/BDFA3CDD  created: 2010-03-07  expires: never
                      card-no: 0001 000004D5
ssb>  1024R/DF3119A9  created: 2010-03-07  expires: never
                      card-no: 0001 000004D5
ssb>  1024R/2764F212  created: 2010-03-07  expires: never
                      card-no: 0001 000004D5

In opensc-explorer the very same card looks like

$ opensc-explorer
OpenSC Explorer version 0.12.1-svn
Using reader with a card: SCM SCR 335 [CCID Interface] (60600adc) 00 00
OpenSC [3F00]> ls
FileID  Type  Size
 004F    wEF    16
[005E]    DF     8
[0065]    DF    20
[006E]    DF   202
[0073]    DF   157
[007A]    DF     5
 5F50    wEF     0
[B600]    DF   141
[B800]    DF   141
[A400]    DF   141
 B601    wEF   142
 B801    wEF   141
 A401    wEF   142
OpenSC [3F00]> cd 0065
OpenSC [3F00/0065]> ls
FileID  Type  Size
 005B    wEF     9
 5F2D    wEF     2
 5F35    wEF     1
OpenSC [3F00/0065]> cat 005B
00000000: 44 6F 65 3C 3C 4A 6F 68 Doe<<John
OpenSC [3F00/0065]>

Tips

General

  • Minimum PIN length is 6 (you get a generic "Bad PIN" error if trying to use a shorter one) and Admin PIN must be at least 8 digits.
  • OpenPGP v2.0 card can be erased with the following command (ATTENTION! ONLY USE IT ON A V2 CARD LIKE CRYPTOSTICK! WILL BRICK OTHERS!)
$ opensc-tool -s 00:20:00:81:08:40:40:40:40:40:40:40:40 \
-s 00:20:00:81:08:40:40:40:40:40:40:40:40 \
-s 00:20:00:81:08:40:40:40:40:40:40:40:40 \
-s 00:20:00:81:08:40:40:40:40:40:40:40:40 \
-s 00:20:00:83:08:40:40:40:40:40:40:40:40 \
-s 00:20:00:83:08:40:40:40:40:40:40:40:40 \
-s 00:20:00:83:08:40:40:40:40:40:40:40:40 \
-s 00:20:00:83:08:40:40:40:40:40:40:40:40 \
-s 00:e6:00:00 \
-s 00:44:00:00

Mac OS X

  • Use https://gpgtools.org/ to get GnuPG2 for Mac OS X
  • Remove OpenSC.tokend from /System/Library/Security/tokend when personalizing your token. scdaemon requires exclusive access which can not be shared with OpenSC.tokend, which is started when OpenPGP Card/token is inserted.
  • kill scdaemon and re-insert your reader if you still see this:
gpg: selecting openpgp failed: Card error
gpg: OpenPGP card not available: Card error

Linux (and Gnome)

GnomeKeyring @gpg-agent@ confusion

Under Gnome, gnome-keyring sets up GPG_AGENT_INFO:

$ env | grep GPG_AGENT
GPG_AGENT_INFO=/tmp/keyring-cKD5KN/gpg:0:1

This agent is not capable of talking to smart cards (--card-status & --card-edit):

$ gpg2 --card-status
gpg: selecting openpgp failed: Unsupported certificate
gpg: OpenPGP card not available: Unsupported certificate

Solution: use gpg2 from a console or unset GPG_AGENT_INFO to use smart card related functions:

$ GPG_AGENT_INFO= gpg2 --card-status
scdaemon[11344]: enabled debug flags: command cardio
Application ID ...: D2760001240102000005000005460000
Version ..........: 2.0
Manufacturer .....: ZeitControl
...

Or permanently disable the gnome-keyring agent:

gnome-session-properties

And then uncheck GPG Password Agent, log out and log back in.

If there is no GPG Password Agent entry in gnome-session-properties, you can put this line to ~/.bashrc file:

unset GPG_AGENT_INFO

SSH agent failure

When using OpenSSH with support of a pkcs11 module, you may fail:

$ ssh-add -s /usr/lib/opensc-pkcs11.so
Enter passphrase for PKCS#11:
SSH_AGENT_FAILURE
Could not add card: /usr/lib/opensc-pkcs11.so

Solution

@gpg2@ and multiple readers

gpg2 only works if the OpenPGP compatible card is in the first listed reader:

$ opensc-tool -l
# Detected readers (pcsc)
Nr.  Card  Features  Name
0    No              Sitecom USB simcard reader MD-010 00 00
1    Yes             German Privacy Foundation Crypto Stick v1.2 01 00
$ GPG_AGENT_INFO= gpg2 --card-status
scdaemon[10980]: enabled debug flags: command cardio
gpg: selecting openpgp failed: Card not present
gpg: OpenPGP card not available: Card not present

versus

$ opensc-tool -l
# Detected readers (pcsc)
Nr.  Card  Features  Name
0    Yes             German Privacy Foundation Crypto Stick v1.2 00 00
1    No              Sitecom USB simcard reader MD-010 01 00
$ GPG_AGENT_INFO= gpg2 --card-status
scdaemon[11344]: enabled debug flags: command cardio
Application ID ...: D2760001240102000005000005460000
Version ..........: 2.0
Manufacturer .....: ZeitControl
...

Solution: remove other smart card readers. If all readers are USB, killing pcscd and inserting readers in the "right order" (Nitrokey first) helps. If this is not possible (for example, a reader integrated into the keyboard) editing the CCID driver Info.plist file and removing entries related to the "other" smart card readers can help. Alternatively look up the name of the reader you are using and add it to ~/.gnupg/scdaemon.conf (or @--reader-port@ command line option if using GnuPG 1.X):

reader-port "German Privacy Foundation Crypto Stick v1.2 01 00"

After this a reader other than the first reader can be used. Be sure to change the configuration file if your reader setup changes (like more readers are added before the right one) as the numbering at the end of the name changes.

No readers error

If there are no readers connected, @gpg2@ gives a "generic" error message:

$ opensc-tool -l
No smart card readers found.
$ GPG_AGENT_INFO= gpg2 --card-status
scdaemon[11033]: enabled debug flags: command cardio
gpg: selecting openpgp failed: Card error
gpg: OpenPGP card not available: Card error

This is just for your information.