Issues with Midi Port 2

[Stef1519]

Hi,

first of all a big "Thank you" for providing this Project!!

I´ve built the 3*3-Board, using the classic F103C8T6 Bluepill. Two In/Out-Ports are working as intended, but the Middle I/O-Midi-Port, connected to RXD2/TXD2 (differs from the Original Schematic, whre the Middle Port is connected to RX/TX1), shows no signs of activity; althrough C13 shows activity when sending Data to the designated Midi out Port; Midiox also doesn´t show Activity on Midi in ax RX1. I´ve triple-checked for a correct wiring/Connection (milled PCB) and used three different Bluepills, but no luck so far. No shortings or whatsoever.

I´ve used the 128K .bin; the 64K Version leads Windows 7 to install an "USB Audio Device" and not the usual Midi driver.

Could that be an configuration issue?

Many thanks & best regards!

[Stef1519]

Could better have checked dozens of times the RX2/TX2-Connection, because i misconnected them, i was on pin 6/7 (counting from the bottomright when the SWD-Connector is at the bottom) and not 7/8. Issue closed !