windsensor-profile.yaml

# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1
macVersion: '1.0.3'
# LoRaWAN Regional Parameters version. Values depend on the LoRaWAN version:
#   1.0:   TS001-1.0
#   1.0.1: TS001-1.0.1
#   1.0.2: RP001-1.0.2 or RP001-1.0.2-RevB
#   1.0.3: RP001-1.0.3-RevA
#   1.0.4: RP002-1.0.0 or RP002-1.0.1
#   1.1:   RP001-1.1-RevA or RP001-1.1-RevB
regionalParametersVersion: 'RP001-1.0.3-RevA'

# Whether the end device supports join (OTAA) or not (ABP)
supportsJoin: true
# If your device is an ABP device (supportsJoin is false), uncomment the following fields:
# RX1 delay
#rx1Delay: 5
# RX1 data rate offset
#rx1DataRateOffset: 0
# RX2 data rate index
#rx2DataRateIndex: 0
# RX2 frequency (MHz)
#rx2Frequency: 869.525
# Factory preset frequencies (MHz)
#factoryPresetFrequencies: [868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9]

# Maximum EIRP
maxEIRP: 16
# Whether the end device supports 32-bit frame counters
supports32bitFCnt: true

# Whether the end device supports class B
supportsClassB: false
# If your device supports class B, uncomment the following fields:
# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
#classBTimeout: 60
# Ping slot period (seconds)
#pingSlotPeriod: 128
# Ping slot data rate index
#pingSlotDataRateIndex: 0
# Ping slot frequency (MHz). Set to 0 if the band supports ping slot frequency hopping.
#pingSlotFrequency: 869.525

# Whether the end device supports class C
supportsClassC: false
# If your device supports class C, uncomment the following fields:
# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
#classCTimeout: 60