diff --git a/VOXELPLA PLUS BLACK.xml.fdm_material b/VOXELPLA PLUS BLACK.xml.fdm_material
new file mode 100644
index 000000000..43657dd0c
--- /dev/null
+++ b/VOXELPLA PLUS BLACK.xml.fdm_material	
@@ -0,0 +1,252 @@
+<?xml version='1.0' encoding='utf-8'?>
+<fdmmaterial xmlns="http://www.ultimaker.com/material" xmlns:cura="http://www.ultimaker.com/cura" version="1.3">
+  <metadata>
+    <name>
+      <brand>VOXELPLA</brand>
+      <material>PLA</material>
+      <color>BLACK</color>
+      <label>VOXELPLA PLUS BLACK</label>
+    </name>
+    <version>8</version>
+    <GUID>da7d7354-792f-4e80-ac3b-59df1de531fa</GUID>
+    <color_code>#000000</color_code>
+    <description>The most reliable PLA PLUS on the planet. Best printed with 200C on the extruder and 45-60C on the bed, minimal retraction is needed. Each spool is $16.99 on WWW.VOXELPLA.COM</description>
+    <adhesion_info>Print on glass, buildtak, PEI sheets, or any other buildplate material and apply little bit of glue stick.</adhesion_info>
+  </metadata>
+  <properties>
+    <density>1.24</density>
+    <diameter>1.75</diameter>
+  </properties>
+  <settings>
+    <setting key="print temperature">200</setting>
+    <setting key="heated bed temperature">60</setting>
+    <setting key="standby temperature">175</setting>
+    <setting key="adhesion tendency">0</setting>
+    <setting key="surface energy">100</setting>
+    <setting key="build volume temperature">28</setting>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_xy3proV2" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_xy3" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_xy2pro" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_xy2" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_x5sa_500" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_x5sa_400" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_x5sa" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_x" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_d01" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Lotmaxx" product="lotmaxx_sc60" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">200</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Kati Hal ARGE" product="kupido" />
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">40</setting>
+      <setting key="retraction amount">0.8</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="IMADE3D" product="IMADE3D JellyBOX" />
+      <setting key="print temperature">210</setting>
+      <setting key="heated bed temperature">55</setting>
+      <hotend id="0.4 mm">
+        <setting key="hardware compatible">yes</setting>
+      </hotend>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_ender5" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_ender4" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_ender3" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_ender2" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr20pro" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr20" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10spro" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10s5" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10s4" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10s" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10mini" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10" />
+      <setting key="heated bed temperature">50.0</setting>
+      <setting key="standby temperature">180.0</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60.0</setting>
+      <setting key="retraction amount">5.0</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="CreawsomeMod" product="creality_base" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
+      <setting key="print temperature">190</setting>
+      <setting key="heated bed temperature">43</setting>
+      <setting key="standby temperature">160</setting>
+      <setting key="print cooling">40.0</setting>
+      <setting key="retraction speed">40</setting>
+      <hotend id="0.8mm thermoplastic extruder">
+        <setting key="hardware compatible">yes</setting>
+        <setting key="retraction amount">1.5</setting>
+      </hotend>
+      <hotend id="0.4mm thermoplastic extruder">
+        <setting key="hardware compatible">yes</setting>
+        <setting key="retraction amount">1.0</setting>
+      </hotend>
+      <hotend id="0.25mm thermoplastic extruder">
+        <setting key="hardware compatible">yes</setting>
+        <setting key="retraction amount">1.0</setting>
+      </hotend>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="BIQU" product="biqu_b1_abl" />
+      <setting key="print temperature">180</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="BIQU" product="biqu_b1" />
+      <setting key="print temperature">180</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Kati Hal ARGE" product="alyanx3dp" />
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">40</setting>
+      <setting key="retraction amount">1.5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Kati Hal ARGE" product="alya3dp" />
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">40</setting>
+      <setting key="retraction amount">1.5</setting>
+    </machine>
+  </settings>
+</fdmmaterial>
diff --git a/VOXELPLA PLUS BLUE.xml.fdm_material b/VOXELPLA PLUS BLUE.xml.fdm_material
new file mode 100644
index 000000000..9f7e7c9fe
--- /dev/null
+++ b/VOXELPLA PLUS BLUE.xml.fdm_material	
@@ -0,0 +1,252 @@
+<?xml version='1.0' encoding='utf-8'?>
+<fdmmaterial xmlns="http://www.ultimaker.com/material" xmlns:cura="http://www.ultimaker.com/cura" version="1.3">
+  <metadata>
+    <name>
+      <brand>VOXELPLA</brand>
+      <material>PLA</material>
+      <color>BLUE</color>
+      <label>VOXELPLA PLUS BLUE</label>
+    </name>
+    <version>8</version>
+    <GUID>da7d7354-792f-4e80-ac3b-59df1de531fa</GUID>
+    <color_code>#0000FF</color_code>
+    <description>The most reliable PLA PLUS on the planet. Best printed with 200C on the extruder and 45-60C on the bed, minimal retraction is needed. Each spool is $16.99 on WWW.VOXELPLA.COM</description>
+    <adhesion_info>Print on glass, buildtak, PEI sheets, or any other buildplate material and apply little bit of glue stick.</adhesion_info>
+  </metadata>
+  <properties>
+    <density>1.24</density>
+    <diameter>1.75</diameter>
+  </properties>
+  <settings>
+    <setting key="print temperature">200</setting>
+    <setting key="heated bed temperature">60</setting>
+    <setting key="standby temperature">175</setting>
+    <setting key="adhesion tendency">0</setting>
+    <setting key="surface energy">100</setting>
+    <setting key="build volume temperature">28</setting>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_xy3proV2" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_xy3" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_xy2pro" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_xy2" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_x5sa_500" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_x5sa_400" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_x5sa" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_x" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_d01" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Lotmaxx" product="lotmaxx_sc60" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">200</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Kati Hal ARGE" product="kupido" />
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">40</setting>
+      <setting key="retraction amount">0.8</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="IMADE3D" product="IMADE3D JellyBOX" />
+      <setting key="print temperature">210</setting>
+      <setting key="heated bed temperature">55</setting>
+      <hotend id="0.4 mm">
+        <setting key="hardware compatible">yes</setting>
+      </hotend>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_ender5" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_ender4" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_ender3" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_ender2" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr20pro" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr20" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10spro" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10s5" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10s4" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10s" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10mini" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10" />
+      <setting key="heated bed temperature">50.0</setting>
+      <setting key="standby temperature">180.0</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60.0</setting>
+      <setting key="retraction amount">5.0</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="CreawsomeMod" product="creality_base" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
+      <setting key="print temperature">190</setting>
+      <setting key="heated bed temperature">43</setting>
+      <setting key="standby temperature">160</setting>
+      <setting key="print cooling">40.0</setting>
+      <setting key="retraction speed">40</setting>
+      <hotend id="0.8mm thermoplastic extruder">
+        <setting key="hardware compatible">yes</setting>
+        <setting key="retraction amount">1.5</setting>
+      </hotend>
+      <hotend id="0.4mm thermoplastic extruder">
+        <setting key="hardware compatible">yes</setting>
+        <setting key="retraction amount">1.0</setting>
+      </hotend>
+      <hotend id="0.25mm thermoplastic extruder">
+        <setting key="hardware compatible">yes</setting>
+        <setting key="retraction amount">1.0</setting>
+      </hotend>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="BIQU" product="biqu_b1_abl" />
+      <setting key="print temperature">180</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="BIQU" product="biqu_b1" />
+      <setting key="print temperature">180</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Kati Hal ARGE" product="alyanx3dp" />
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">40</setting>
+      <setting key="retraction amount">1.5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Kati Hal ARGE" product="alya3dp" />
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">40</setting>
+      <setting key="retraction amount">1.5</setting>
+    </machine>
+  </settings>
+</fdmmaterial>
diff --git a/VOXELPLA PLUS GREY.xml.fdm_material b/VOXELPLA PLUS GREY.xml.fdm_material
new file mode 100644
index 000000000..de8c97516
--- /dev/null
+++ b/VOXELPLA PLUS GREY.xml.fdm_material	
@@ -0,0 +1,252 @@
+<?xml version='1.0' encoding='utf-8'?>
+<fdmmaterial xmlns="http://www.ultimaker.com/material" xmlns:cura="http://www.ultimaker.com/cura" version="1.3">
+  <metadata>
+    <name>
+      <brand>VOXELPLA</brand>
+      <material>PLA</material>
+      <color>GREY</color>
+      <label>VOXELPLA PLUS GREY</label>
+    </name>
+    <version>8</version>
+    <GUID>da7d7354-792f-4e80-ac3b-59df1de531fa</GUID>
+    <color_code>#D3D3D3</color_code>
+    <description>The most reliable PLA PLUS on the planet. Best printed with 200C on the extruder and 45-60C on the bed, minimal retraction is needed. Each spool is $16.99 on WWW.VOXELPLA.COM</description>
+    <adhesion_info>Print on glass, buildtak, PEI sheets, or any other buildplate material with a little glue.</adhesion_info>
+  </metadata>
+  <properties>
+    <density>1.24</density>
+    <diameter>1.75</diameter>
+  </properties>
+  <settings>
+    <setting key="print temperature">200</setting>
+    <setting key="heated bed temperature">60</setting>
+    <setting key="standby temperature">175</setting>
+    <setting key="adhesion tendency">0</setting>
+    <setting key="surface energy">100</setting>
+    <setting key="build volume temperature">28</setting>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_xy3proV2" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_xy3" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_xy2pro" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_xy2" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_x5sa_500" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_x5sa_400" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_x5sa" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_x" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_d01" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Lotmaxx" product="lotmaxx_sc60" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">200</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Kati Hal ARGE" product="kupido" />
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">40</setting>
+      <setting key="retraction amount">0.8</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="IMADE3D" product="IMADE3D JellyBOX" />
+      <setting key="print temperature">210</setting>
+      <setting key="heated bed temperature">55</setting>
+      <hotend id="0.4 mm">
+        <setting key="hardware compatible">yes</setting>
+      </hotend>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_ender5" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_ender4" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_ender3" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_ender2" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr20pro" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr20" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10spro" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10s5" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10s4" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10s" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10mini" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10" />
+      <setting key="heated bed temperature">50.0</setting>
+      <setting key="standby temperature">180.0</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60.0</setting>
+      <setting key="retraction amount">5.0</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="CreawsomeMod" product="creality_base" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
+      <setting key="print temperature">190</setting>
+      <setting key="heated bed temperature">43</setting>
+      <setting key="standby temperature">160</setting>
+      <setting key="print cooling">40.0</setting>
+      <setting key="retraction speed">40</setting>
+      <hotend id="0.8mm thermoplastic extruder">
+        <setting key="hardware compatible">yes</setting>
+        <setting key="retraction amount">1.5</setting>
+      </hotend>
+      <hotend id="0.4mm thermoplastic extruder">
+        <setting key="hardware compatible">yes</setting>
+        <setting key="retraction amount">1.0</setting>
+      </hotend>
+      <hotend id="0.25mm thermoplastic extruder">
+        <setting key="hardware compatible">yes</setting>
+        <setting key="retraction amount">1.0</setting>
+      </hotend>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="BIQU" product="biqu_b1_abl" />
+      <setting key="print temperature">180</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="BIQU" product="biqu_b1" />
+      <setting key="print temperature">180</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Kati Hal ARGE" product="alyanx3dp" />
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">40</setting>
+      <setting key="retraction amount">1.5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Kati Hal ARGE" product="alya3dp" />
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">40</setting>
+      <setting key="retraction amount">1.5</setting>
+    </machine>
+  </settings>
+</fdmmaterial>
diff --git a/VOXELPLA PLUS RED.xml.fdm_material b/VOXELPLA PLUS RED.xml.fdm_material
new file mode 100644
index 000000000..dce8c994d
--- /dev/null
+++ b/VOXELPLA PLUS RED.xml.fdm_material	
@@ -0,0 +1,252 @@
+<?xml version='1.0' encoding='utf-8'?>
+<fdmmaterial xmlns="http://www.ultimaker.com/material" xmlns:cura="http://www.ultimaker.com/cura" version="1.3">
+  <metadata>
+    <name>
+      <brand>VOXELPLA</brand>
+      <material>PLA</material>
+      <color>RED</color>
+      <label>VOXELPLA PLUS RED</label>
+    </name>
+    <version>8</version>
+    <GUID>da7d7354-792f-4e80-ac3b-59df1de531fa</GUID>
+    <color_code>#D22B2B</color_code>
+    <description>The most reliable PLA PLUS on the planet. Best printed with 200C on the extruder and 45-60C on the bed, minimal retraction is needed. Each spool is $16.99 on WWW.VOXELPLA.COM</description>
+    <adhesion_info>Print on glass, buildtak, PEI sheets, or any other buildplate material with glue.</adhesion_info>
+  </metadata>
+  <properties>
+    <density>1.24</density>
+    <diameter>1.75</diameter>
+  </properties>
+  <settings>
+    <setting key="print temperature">200</setting>
+    <setting key="heated bed temperature">60</setting>
+    <setting key="standby temperature">175</setting>
+    <setting key="adhesion tendency">0</setting>
+    <setting key="surface energy">100</setting>
+    <setting key="build volume temperature">28</setting>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_xy3proV2" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_xy3" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_xy2pro" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_xy2" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_x5sa_500" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_x5sa_400" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_x5sa" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_x" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_d01" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Lotmaxx" product="lotmaxx_sc60" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">200</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Kati Hal ARGE" product="kupido" />
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">40</setting>
+      <setting key="retraction amount">0.8</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="IMADE3D" product="IMADE3D JellyBOX" />
+      <setting key="print temperature">210</setting>
+      <setting key="heated bed temperature">55</setting>
+      <hotend id="0.4 mm">
+        <setting key="hardware compatible">yes</setting>
+      </hotend>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_ender5" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_ender4" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_ender3" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_ender2" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr20pro" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr20" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10spro" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10s5" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10s4" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10s" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10mini" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10" />
+      <setting key="heated bed temperature">50.0</setting>
+      <setting key="standby temperature">180.0</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60.0</setting>
+      <setting key="retraction amount">5.0</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="CreawsomeMod" product="creality_base" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
+      <setting key="print temperature">190</setting>
+      <setting key="heated bed temperature">43</setting>
+      <setting key="standby temperature">160</setting>
+      <setting key="print cooling">40.0</setting>
+      <setting key="retraction speed">40</setting>
+      <hotend id="0.8mm thermoplastic extruder">
+        <setting key="hardware compatible">yes</setting>
+        <setting key="retraction amount">1.5</setting>
+      </hotend>
+      <hotend id="0.4mm thermoplastic extruder">
+        <setting key="hardware compatible">yes</setting>
+        <setting key="retraction amount">1.0</setting>
+      </hotend>
+      <hotend id="0.25mm thermoplastic extruder">
+        <setting key="hardware compatible">yes</setting>
+        <setting key="retraction amount">1.0</setting>
+      </hotend>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="BIQU" product="biqu_b1_abl" />
+      <setting key="print temperature">180</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="BIQU" product="biqu_b1" />
+      <setting key="print temperature">180</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Kati Hal ARGE" product="alyanx3dp" />
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">40</setting>
+      <setting key="retraction amount">1.5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Kati Hal ARGE" product="alya3dp" />
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">40</setting>
+      <setting key="retraction amount">1.5</setting>
+    </machine>
+  </settings>
+</fdmmaterial>
diff --git a/VOXELPLA PLUS WHITE.xml.fdm_material b/VOXELPLA PLUS WHITE.xml.fdm_material
new file mode 100644
index 000000000..58205ac53
--- /dev/null
+++ b/VOXELPLA PLUS WHITE.xml.fdm_material	
@@ -0,0 +1,252 @@
+<?xml version='1.0' encoding='utf-8'?>
+<fdmmaterial xmlns="http://www.ultimaker.com/material" xmlns:cura="http://www.ultimaker.com/cura" version="1.3">
+  <metadata>
+    <name>
+      <brand>VOXELPLA</brand>
+      <material>PLA</material>
+      <color>WHITE</color>
+      <label>VOXELPLA PLUS WHITE</label>
+    </name>
+    <version>8</version>
+    <GUID>da7d7354-792f-4e80-ac3b-59df1de531fa</GUID>
+    <color_code>#FAFAFA</color_code>
+    <description>The most reliable PLA PLUS on the planet. Best printed with 200C on the extruder and 45-60C on the bed, minimal retraction is needed. Each spool is $16.99 on WWW.VOXELPLA.COM</description>
+    <adhesion_info>Print on glass, buildtak, PEI sheets, or any other buildplate material with glue.</adhesion_info>
+  </metadata>
+  <properties>
+    <density>1.24</density>
+    <diameter>1.75</diameter>
+  </properties>
+  <settings>
+    <setting key="print temperature">200</setting>
+    <setting key="heated bed temperature">60</setting>
+    <setting key="standby temperature">175</setting>
+    <setting key="adhesion tendency">0</setting>
+    <setting key="surface energy">100</setting>
+    <setting key="build volume temperature">28</setting>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_xy3proV2" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_xy3" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_xy2pro" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_xy2" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_x5sa_500" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_x5sa_400" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_x5sa" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_x" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Tronxy" product="tronxy_d01" />
+      <setting key="heated bed temperature">55</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Lotmaxx" product="lotmaxx_sc60" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">200</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Kati Hal ARGE" product="kupido" />
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">40</setting>
+      <setting key="retraction amount">0.8</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="IMADE3D" product="IMADE3D JellyBOX" />
+      <setting key="print temperature">210</setting>
+      <setting key="heated bed temperature">55</setting>
+      <hotend id="0.4 mm">
+        <setting key="hardware compatible">yes</setting>
+      </hotend>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_ender5" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_ender4" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_ender3" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_ender2" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr20pro" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr20" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10spro" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10s5" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10s4" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10s" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10mini" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Creality3D" product="creality_cr10" />
+      <setting key="heated bed temperature">50.0</setting>
+      <setting key="standby temperature">180.0</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60.0</setting>
+      <setting key="retraction amount">5.0</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="CreawsomeMod" product="creality_base" />
+      <setting key="heated bed temperature">50</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">60</setting>
+      <setting key="retraction amount">5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Cartesio bv" product="cartesio" />
+      <setting key="print temperature">190</setting>
+      <setting key="heated bed temperature">43</setting>
+      <setting key="standby temperature">160</setting>
+      <setting key="print cooling">40.0</setting>
+      <setting key="retraction speed">40</setting>
+      <hotend id="0.8mm thermoplastic extruder">
+        <setting key="hardware compatible">yes</setting>
+        <setting key="retraction amount">1.5</setting>
+      </hotend>
+      <hotend id="0.4mm thermoplastic extruder">
+        <setting key="hardware compatible">yes</setting>
+        <setting key="retraction amount">1.0</setting>
+      </hotend>
+      <hotend id="0.25mm thermoplastic extruder">
+        <setting key="hardware compatible">yes</setting>
+        <setting key="retraction amount">1.0</setting>
+      </hotend>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="BIQU" product="biqu_b1_abl" />
+      <setting key="print temperature">180</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="BIQU" product="biqu_b1" />
+      <setting key="print temperature">180</setting>
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Kati Hal ARGE" product="alyanx3dp" />
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">40</setting>
+      <setting key="retraction amount">1.5</setting>
+    </machine>
+    <machine>
+      <machine_identifier manufacturer="Kati Hal ARGE" product="alya3dp" />
+      <setting key="standby temperature">180</setting>
+      <setting key="print cooling">100</setting>
+      <setting key="retraction speed">40</setting>
+      <setting key="retraction amount">1.5</setting>
+    </machine>
+  </settings>
+</fdmmaterial>