{"payload":{"feedbackUrl":"https://github.com/orgs/community/discussions/53140","repo":{"id":30782639,"defaultBranch":"master","name":"meta-raspberrypi","ownerLogin":"agherzan","currentUserCanPush":false,"isFork":false,"isEmpty":false,"createdAt":"2015-02-14T00:47:35.000Z","ownerAvatar":"https://avatars.githubusercontent.com/u/1746941?v=4","public":true,"private":false,"isOrgOwned":false},"refInfo":{"name":"","listCacheKey":"v0:1716936699.0","currentOid":""},"activityList":{"items":[{"before":"1918a27419dcd5e79954c0dc0edddcde91057a7e","after":"6df7e028a2b7b2d8cab0745dc0ed2eebc3742a17","ref":"refs/heads/scarthgap","pushedAt":"2024-09-23T23:27:28.000Z","pushType":"pr_merge","commitsCount":1,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"linux-firmware-rpidistro: Upgrade to bookworm/20230625-2+rpt3\n\nThe upgrade was necessary to get WLAN running on a CM4 (under scarthgap).\nOtherwise I continuously got the following kernel messages when trying to connect:\n[ 31.907395] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52\n[ 32.023434] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52\n[ 32.135403] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52\n[ 32.247392] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52\n[ 33.919395] brcmfmac: brcmf_set_channel: set chanspec 0xd090 fail, reason -52\n[ 33.926940] brcmfmac: brcmf_set_channel: set chanspec 0xd095 fail, reason -52\n[ 33.935151] brcmfmac: brcmf_set_channel: set chanspec 0xd099 fail, reason -52\n[ 33.942691] brcmfmac: brcmf_set_channel: set chanspec 0xd09d fail, reason -52\n[ 33.950338] brcmfmac: brcmf_set_channel: set chanspec 0xd0a1 fail, reason -52\n[ 33.957903] brcmfmac: brcmf_set_channel: set chanspec 0xd0a5 fail, reason -52\n\nFirmware version before: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2\nFirmware version current: BCM4345/6 wl0: Aug 29 2023 01:47:08 version 7.45.265 (28bca26 CY) FWID 01-b677b91b\n\nSigned-off-by: Matthias Klein ","shortMessageHtmlLink":"linux-firmware-rpidistro: Upgrade to bookworm/20230625-2+rpt3"}},{"before":"f44832bcddada39bf61ead8e6164e285807cead3","after":"d5ffe135c73ab940148e595c6fb010d50ddcfc60","ref":"refs/heads/master","pushedAt":"2024-09-21T10:50:51.000Z","pushType":"pr_merge","commitsCount":1,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"linux-firmware-rpidistro: Upgrade to bookworm/20230625-2+rpt3\n\nThe upgrade was necessary to get WLAN running on a CM4 (under scarthgap).\nOtherwise I continuously got the following kernel messages when trying to connect:\n[ 31.907395] brcmfmac: brcmf_set_channel: set chanspec 0xd022 fail, reason -52\n[ 32.023434] brcmfmac: brcmf_set_channel: set chanspec 0xd026 fail, reason -52\n[ 32.135403] brcmfmac: brcmf_set_channel: set chanspec 0xd02a fail, reason -52\n[ 32.247392] brcmfmac: brcmf_set_channel: set chanspec 0xd02e fail, reason -52\n[ 33.919395] brcmfmac: brcmf_set_channel: set chanspec 0xd090 fail, reason -52\n[ 33.926940] brcmfmac: brcmf_set_channel: set chanspec 0xd095 fail, reason -52\n[ 33.935151] brcmfmac: brcmf_set_channel: set chanspec 0xd099 fail, reason -52\n[ 33.942691] brcmfmac: brcmf_set_channel: set chanspec 0xd09d fail, reason -52\n[ 33.950338] brcmfmac: brcmf_set_channel: set chanspec 0xd0a1 fail, reason -52\n[ 33.957903] brcmfmac: brcmf_set_channel: set chanspec 0xd0a5 fail, reason -52\n\nFirmware version before: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2\nFirmware version current: BCM4345/6 wl0: Aug 29 2023 01:47:08 version 7.45.265 (28bca26 CY) FWID 01-b677b91b\n\nSigned-off-by: Matthias Klein ","shortMessageHtmlLink":"linux-firmware-rpidistro: Upgrade to bookworm/20230625-2+rpt3"}},{"before":"e49de228735391e068642309009058fb06f4c528","after":"f44832bcddada39bf61ead8e6164e285807cead3","ref":"refs/heads/master","pushedAt":"2024-09-09T12:59:04.000Z","pushType":"pr_merge","commitsCount":1,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"README.md: Update link to compatible layers\n\nThe previous link pointing to Yocto Project Compatible Layers was no\nlonger valid.\n\nSigned-off-by: Victor Löfgren ","shortMessageHtmlLink":"README.md: Update link to compatible layers"}},{"before":"f6c79cde63c5d2773762525bdefc9ac41233eff9","after":"e49de228735391e068642309009058fb06f4c528","ref":"refs/heads/master","pushedAt":"2024-09-05T08:09:53.000Z","pushType":"pr_merge","commitsCount":1,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"rpi-base: build uart dts overlays by default\n\nWe need the uart dts overlays to enable a specific uart peripheral.\nFor example if you use the disable-bt overlay, you have to enable\nthe uart0 dts overlay to be able to use uart0 peripheral.\n\nSigned-off-by: Pierrick Curt ","shortMessageHtmlLink":"rpi-base: build uart dts overlays by default"}},{"before":"43dada077147153143fff96ce1c81f09dba3216b","after":"f6c79cde63c5d2773762525bdefc9ac41233eff9","ref":"refs/heads/master","pushedAt":"2024-09-04T23:51:05.000Z","pushType":"pr_merge","commitsCount":1,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"rpi-base.inc: add the disable-wifi-pi5 overlay\n\nFor RPi5 we need to use a different overlay to disable built-in WiFi.\n\nSigned-off-by: Andrew Lalaev ","shortMessageHtmlLink":"rpi-base.inc: add the disable-wifi-pi5 overlay"}},{"before":"ec745772dcd5dc4c38ce2d7e6387d4442ad3b492","after":"43dada077147153143fff96ce1c81f09dba3216b","ref":"refs/heads/master","pushedAt":"2024-09-04T09:49:54.000Z","pushType":"pr_merge","commitsCount":2,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"docs: include PREFERRED_PROVIDER_ffmpeg,vlc change\n\nSigned-off-by: Vincent Davis Jr ","shortMessageHtmlLink":"docs: include PREFERRED_PROVIDER_ffmpeg,vlc change"}},{"before":"e9e5efa750490cd0dac853eb65640d0cb337b03e","after":"ec745772dcd5dc4c38ce2d7e6387d4442ad3b492","ref":"refs/heads/master","pushedAt":"2024-08-28T13:14:29.000Z","pushType":"pr_merge","commitsCount":1,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"mesa: rename bbappend to match new recipe name from oe-core\n\nOtherwise it will fail to parse.\n\nRenamed in:\nhttps://git.openembedded.org/openembedded-core/commit/?id=f5cfb3e23603cefb2f3f6bfe776afaedefd10808\n\nSigned-off-by: Martin Jansa ","shortMessageHtmlLink":"mesa: rename bbappend to match new recipe name from oe-core"}},{"before":"3d6873db6bcd82ab9242854dbe9ea08a18128224","after":"e9e5efa750490cd0dac853eb65640d0cb337b03e","ref":"refs/heads/master","pushedAt":"2024-08-03T06:35:57.000Z","pushType":"pr_merge","commitsCount":1,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"udev-rules-rpi.bb: Fix psplash systemd connection\n\nAdd udev rule to notify systemd of available framebuffer\n\nUsing psplash in combination with systemd the splash screen is not\nshown. The dependency to sys-devices-platform-gpu-graphics-fb0.device\nwill terminate psplash-start.service because systemd is not aware of the\nexisting framebuffer device node.\nSee https://lists.yoctoproject.org/g/yocto/topic/91286438#57156\n\nSigned-off-by: Bastian Wanner ","shortMessageHtmlLink":"udev-rules-rpi.bb: Fix psplash systemd connection"}},{"before":"633e51f4bc70c236c2466ae0e4f9b5ce53517b8e","after":"3d6873db6bcd82ab9242854dbe9ea08a18128224","ref":"refs/heads/master","pushedAt":"2024-07-30T12:20:11.000Z","pushType":"pr_merge","commitsCount":1,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"weston-init.bbappend: Delete\n\nThese options are now part of weston.ini since yocto 4.0 [1]\n\n[1] https://git.yoctoproject.org/poky/commit/?id=5c95402ff95\n\nSigned-off-by: Khem Raj ","shortMessageHtmlLink":"weston-init.bbappend: Delete"}},{"before":"434ed33c90b7659152b1e8d7c2d4d785db85105f","after":"633e51f4bc70c236c2466ae0e4f9b5ce53517b8e","ref":"refs/heads/master","pushedAt":"2024-07-18T23:21:26.000Z","pushType":"pr_merge","commitsCount":1,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"rpi-base.inc: added the disable-bt-pi5 device tree overlay\n\nThe overlay to disable Bluetooth is different for Raspberry Pi 5.\n\nSigned-off-by: Jan Vermaete ","shortMessageHtmlLink":"rpi-base.inc: added the disable-bt-pi5 device tree overlay"}},{"before":"065d5a457f1eb7745c68093c56e1b32afd291825","after":"434ed33c90b7659152b1e8d7c2d4d785db85105f","ref":"refs/heads/master","pushedAt":"2024-07-18T10:51:41.000Z","pushType":"pr_merge","commitsCount":1,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"rpi-u-boot-scr: WORKDIR -> UNPACKDIR transition\n\nThis adapts to the oe-core rework to enforce a separate directory\nfor unpacking local sources (UNPACKDIR) instead of directly using\nWORKDIR.\n\nFollows the preliminary guideline from:\nhttps://lists.openembedded.org/g/openembedded-architecture/message/2007\n\nSigned-off-by: Leon Anavi ","shortMessageHtmlLink":"rpi-u-boot-scr: WORKDIR -> UNPACKDIR transition"}},{"before":"cc529a811dd405c5d6b9685166488d7a97f0d174","after":"065d5a457f1eb7745c68093c56e1b32afd291825","ref":"refs/heads/master","pushedAt":"2024-07-17T21:16:29.000Z","pushType":"pr_merge","commitsCount":1,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"README.md: pi3-disable-bt is renamed to disable-bt in kas example\n\nin commit 01b162388e38eb7f7bdd77e80e20454672f993f9\nwith commit message:\n\n rpi-base: Drop old dtbo names\n\n pi3-disable-bt is renamed to disable-bt and pi3-miniuart-bt is renamed\n to miniuart-bt in 2014, now with 5.4 these are not recognised anymore\n and miniuart-bt and disable-bt are already part of RPI_KERNEL_DEVICETREE_OVERLAYS\n\nSigned-off-by: Jan Vermaete ","shortMessageHtmlLink":"README.md: pi3-disable-bt is renamed to disable-bt in kas example"}},{"before":"6bf0b1874bc080941df1d6e55e01fcdc54c7a013","after":"cc529a811dd405c5d6b9685166488d7a97f0d174","ref":"refs/heads/master","pushedAt":"2024-07-17T21:13:21.000Z","pushType":"pr_merge","commitsCount":1,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"linux-raspberrypi: Drop deprecated configs from android-driver.cfg\n\nCONFIG_ASHMEM has been deprecated since 5.18 by:\n commit 721412ed3d819e767cac2b06646bf03aa158aaec\n Author: Christoph Hellwig \n Date: Tue Mar 15 13:34:57 2022 +0100\n\n staging: remove ashmem\n\n The mainline replacement for ashmem is memfd, so remove the legacy\n code from drivers/staging/\n\nso has CONFIG_ANDROID since 6.1 by:\n commit 1045a06724f322ed61f1ffb994427c7bdbe64647\n Author: Christoph Hellwig \n Date: Wed Jun 29 17:01:02 2022 +0200\n\n remove CONFIG_ANDROID\n\n The ANDROID config symbol is only used to guard the binder config\n symbol and to inject completely random config changes. Remove it\n as it is obviously a bad idea.\n\nAs now master has 6.1 or later, both should be dropped.\n\nSigned-off-by: Jaeyoon Jung ","shortMessageHtmlLink":"linux-raspberrypi: Drop deprecated configs from android-driver.cfg"}},{"before":"da35d1f66319425a2b4b8f802bae821db0ee892d","after":"6bf0b1874bc080941df1d6e55e01fcdc54c7a013","ref":"refs/heads/master","pushedAt":"2024-07-09T09:44:00.000Z","pushType":"pr_merge","commitsCount":1,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"linux-raspberrypi: Upgrade kernel to 6.6.36\n\nAlso bring matching linux-yocto kernel metadata\n\nSigned-off-by: Khem Raj ","shortMessageHtmlLink":"linux-raspberrypi: Upgrade kernel to 6.6.36"}},{"before":"eb8ffc4e63e5e2f729d90d0cd95b8cffed12ece1","after":"da35d1f66319425a2b4b8f802bae821db0ee892d","ref":"refs/heads/master","pushedAt":"2024-07-08T12:41:53.000Z","pushType":"pr_merge","commitsCount":1,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"kas: updated the refspec syntax of the kas file\n\nFixed the warning from kas:\n WARNING - Using deprecated refspec for repository \"poky\". You should migrate to commit/tag/branch.\n WARNING - Using deprecated refspec for repository \"meta-openembedded\". You should migrate to commit/tag/branch.\n WARNING - Using deprecated refspec for repository \"meta-qt5\". You should migrate to commit/tag/branch.\n\nSigned-off-by: Jan Vermaete ","shortMessageHtmlLink":"kas: updated the refspec syntax of the kas file"}},{"before":"b7fa9b4ba1a99f9302c22ac09b23261383195d8c","after":"eb8ffc4e63e5e2f729d90d0cd95b8cffed12ece1","ref":"refs/heads/master","pushedAt":"2024-06-18T08:15:21.000Z","pushType":"pr_merge","commitsCount":1,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"rpidistro-ffmpeg: upgrade 4.3.4 -> 5.1.4\n\nReduce amount of patches applied as they\nare no longer required for building.\n\nFrom older commit no longer required\n\n* 0001-avcodec-arm-sbcenc-avoid-callee-preserved-vfp-regist.patch\n* 0002-Fix-build-on-powerpc-and-ppc64.patch\n* 0003-avcodec-pngenc-remove-monowhite-from-apng-formats.patch\n* 0004-ffmpeg-4.3.4-rpi_14.patc\n* 0005-fix-flags.diff\n\nCreated by OE community to fix builds and are no longer required\n\n* 2002-libavdevice-opengl_enc-update-dynamic-function-loader.patch\n* 2003-libavcodec-fix-v4l2_req_devscan.patch\n\nrpidistro-ffmpeg updates:\n\n* removal of avresample flag. No longer exists\n* removal of rpi flag. No longer exists\n* include vout-egl and epoxy if opengl or x11 included\n in DISTRO_FEATURES.\n\nSigned-off-by: Vincent Davis Jr ","shortMessageHtmlLink":"rpidistro-ffmpeg: upgrade 4.3.4 -> 5.1.4"}},{"before":"20bceae177d73a5b64d4c49a695c9e7335f994fb","after":"fd79e74cbc112aca09c449b80aaa076a21f99ef5","ref":"refs/heads/nanbield","pushedAt":"2024-06-17T19:24:43.000Z","pushType":"pr_merge","commitsCount":1,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"u-boot: backport one commit from v2024.01 to fix booting from uSD\n\n* fixes:\n https://github.com/agherzan/meta-raspberrypi/issues/1338\n\n* apply it in version specific u-boot_2023.10.bbappend so that if someone\n already uses newer version backported to nanbield it won't cause\n do_patch failure\n\n* instead of:\n U-Boot 2023.10 (Oct 02 2023 - 14:39:59 +0000)\n\n DRAM: 948 MiB (effective 3.9 GiB)\n RPI 4 Model B (0xc03111)\n Core: 212 devices, 16 uclasses, devicetree: board\n MMC: mmcnr@7e300000: 1, mmc@7e340000: 0\n Loading Environment from FAT... OK\n In: serial,usbkbd\n Out: serial,vidconsole\n Err: serial,vidconsole\n Net: eth0: ethernet@7d580000\n PCIe BRCM: link up, 5.0 Gbps x1 (SSC)\n starting USB...\n Bus xhci_pci: Register 5000420 NbrPorts 5\n Starting the controller\n USB XHCI 1.00\n scanning bus xhci_pci for devices... 2 USB Device(s) found\n scanning usb for storage devices... 0 Storage Device(s) found\n Hit any key to stop autoboot: 0\n Card did not respond to voltage select! : -110\n ethernet@7d580000 Waiting for PHY auto negotiation to complete......... TIMEOUT !\n bcmgenet: PHY startup failed: -110\n ethernet@7d580000 Waiting for PHY auto negotiation to complete......... TIMEOUT !\n bcmgenet: PHY startup failed: -110\n\n* it boots automatically\n\n U-Boot 2023.10 (Oct 02 2023 - 14:39:59 +0000)\n\n DRAM: 948 MiB (effective 3.9 GiB)\n RPI 4 Model B (0xc03111)\n Core: 212 devices, 16 uclasses, devicetree: board\n MMC: mmcnr@7e300000: 1, mmc@7e340000: 0\n Loading Environment from FAT... OK\n In: serial,usbkbd\n Out: serial,vidconsole\n Err: serial,vidconsole\n Net: eth0: ethernet@7d580000\n PCIe BRCM: link up, 5.0 Gbps x1 (SSC)\n starting USB...\n Bus xhci_pci: Register 5000420 NbrPorts 5\n Starting the controller\n USB XHCI 1.00\n scanning bus xhci_pci for devices... 2 USB Device(s) found\n scanning usb for storage devices... 0 Storage Device(s) found\n Hit any key to stop autoboot: 0\n Card did not respond to voltage select! : -110\n ** Booting bootflow 'mmc@7e340000.bootdev.part_1' with script\n Working FDT set to 2eff2300\n 25268736 bytes read in 1099 ms (21.9 MiB/s)\n Moving Image from 0x80000 to 0x200000, end=1b30000\n ## Flattened Device Tree blob at 2eff2300\n Booting using the fdt blob at 0x2eff2300\n Working FDT set to 2eff2300\n Using Device Tree in place at 000000002eff2300, end 000000002f002f69\n Working FDT set to 2eff2300\n\n Starting kernel ...\n\nSigned-off-by: Martin Jansa ","shortMessageHtmlLink":"u-boot: backport one commit from v2024.01 to fix booting from uSD"}},{"before":"0f46a1d3768a6093409c0a2da04f3c47a18bde76","after":"1918a27419dcd5e79954c0dc0edddcde91057a7e","ref":"refs/heads/scarthgap","pushedAt":"2024-06-07T04:19:13.000Z","pushType":"pr_merge","commitsCount":1,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"linux-firmware-rpidistro: Fix wireless on model Zero 2 W\n\nFirmware links for model Zero 2 W were missing.\n\nThis patch sets the necessary links for brcmfmac firmware. Without the\nlinks, the firmware cannot be loaded without causing boot messages like:\nbrcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430b0-sdio.raspberrypi,model-zero-2-w.bin failed with error -2\n\nFixes agherzan/meta-raspberrypi#1324\n\nSigned-off-by: Matthias Klein ","shortMessageHtmlLink":"linux-firmware-rpidistro: Fix wireless on model Zero 2 W"}},{"before":"70c293b25f218550354ca3615780eab98afe9f07","after":"d7544f35756d87834e8b4bf3e3e733c771d380ae","ref":"refs/heads/kirkstone","pushedAt":"2024-06-04T19:49:35.000Z","pushType":"pr_merge","commitsCount":3,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"rpi-base: Removed hifiberry amp4pro.\n\nRemoved hifiberry amp4pro.\n\nSigned-off-by: Michał Kluska ","shortMessageHtmlLink":"rpi-base: Removed hifiberry amp4pro."}},{"before":"380d2fc2558f0f172c8decac6715d1d062e9b5d7","after":"b7fa9b4ba1a99f9302c22ac09b23261383195d8c","ref":"refs/heads/master","pushedAt":"2024-06-04T10:39:47.000Z","pushType":"pr_merge","commitsCount":1,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"linux-firmware-rpidistro: Fix wireless on model Zero 2 W\n\nFirmware links for model Zero 2 W were missing.\n\nThis patch sets the necessary links for brcmfmac firmware. Without the\nlinks, the firmware cannot be loaded without causing boot messages like:\nbrcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430b0-sdio.raspberrypi,model-zero-2-w.bin failed with error -2\n\nFixes agherzan/meta-raspberrypi#1324\n\nSigned-off-by: Matthias Klein ","shortMessageHtmlLink":"linux-firmware-rpidistro: Fix wireless on model Zero 2 W"}},{"before":"2174bfd0b219d7a40c7ddc751630b9199a9d4fb4","after":"380d2fc2558f0f172c8decac6715d1d062e9b5d7","ref":"refs/heads/master","pushedAt":"2024-06-03T21:38:53.000Z","pushType":"pr_merge","commitsCount":1,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"gstreamer1.0-omx: remove the .bbappend\n\noe-core upgrade 1.22.11 -> 1.24.3:\nhttps://github.com/openembedded/openembedded-core/commit/9c21815339afb85f558d8a1e0365614320cdc7d7\n\nbe aware that this also dropped gstreamer1.0-omx recipe as upstream has removed it:\nhttps://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4976\nand similarly for libomxil:\nhttps://github.com/openembedded/openembedded-core/commit/63535ce55141e7d4184a1f19efc3f49946f506ae\n\nSo now meta-raspberrypi doesn't parse again due to this .bbappend\n\nRemove it to unblock parsing, but there will be other improvements\nor cleanups needed later (preferrably by someone who was using that\nI'm just seeing parsing failure in world builds). e.g.:\n\nconf/machine/include/rpi-default-providers.inc:PREFERRED_PROVIDER_virtual/libomxil ?= \"userland\"\nconf/machine/include/rpi-default-providers.inc:VIRTUAL-RUNTIME_libomxil = \"userland\"\ndynamic-layers/multimedia-layer/recipes-multimedia/rpidistro-vlc/rpidistro-vlc_3.0.17.bb: file://3003-codec-omxil_core-replace-opt-vc-path-with-usr-lib.patch \\\ndynamic-layers/multimedia-layer/recipes-multimedia/rpidistro-vlc/rpidistro-vlc_3.0.17.bb: file://3006-codec-omxil_core.h-fix-multiple-definition-of.patch \\\ndynamic-layers/multimedia-layer/recipes-multimedia/rpidistro-vlc/rpidistro-vlc_3.0.17.bb:PACKAGECONFIG[mmal] = \"--enable-omxil --enable-omxil-vout --enable-rpi-omxil --enable-mmal --enable-mmal-avcodec,,userland\"\nrecipes-graphics/userland/userland_git.bb:PROVIDES += \"virtual/libomxil\"\nrecipes-multimedia/omxplayer/omxplayer_git.bb:DEPENDS = \"alsa-lib libpcre virtual/egl boost freetype dbus openssl libssh virtual/libomxil coreutils-native curl-native userland\"\n\nSigned-off-by: Martin Jansa ","shortMessageHtmlLink":"gstreamer1.0-omx: remove the .bbappend"}},{"before":"9dc6673d41044f1174551120ce63501421dbcd85","after":"70c293b25f218550354ca3615780eab98afe9f07","ref":"refs/heads/kirkstone","pushedAt":"2024-05-30T09:03:18.000Z","pushType":"pr_merge","commitsCount":4,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"docs: Fix ReadTheDocs builds.os requirement\n\nThis fixes:\n\nThe configuration key \"build.os\" is required to build your\ndocumentation. Read more at\nhttps://docs.readthedocs.io/en/stable/config-file/v2.html#build-os\n\nSigned-off-by: Andrei Gherzan ","shortMessageHtmlLink":"docs: Fix ReadTheDocs builds.os requirement"}},{"before":"ee5ae72808ff9d065650b505bd51d4a11f162c89","after":"2174bfd0b219d7a40c7ddc751630b9199a9d4fb4","ref":"refs/heads/master","pushedAt":"2024-05-29T23:33:12.000Z","pushType":"pr_merge","commitsCount":2,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"layer.conf: declare compatibility only with styhead\n\n* we don't know yet what changes will be needed to stay compatible with\n final styhead, but we already know that the last changes for UNPACKDIR\n aren't compatible with scarthgap or nanbield.\n\nSigned-off-by: Martin Jansa ","shortMessageHtmlLink":"layer.conf: declare compatibility only with styhead"}},{"before":"fde68b24f08b0eac4ad4bfd3c461dc17fe3a263c","after":"20bceae177d73a5b64d4c49a695c9e7335f994fb","ref":"refs/heads/nanbield","pushedAt":"2024-05-29T09:12:11.000Z","pushType":"pr_merge","commitsCount":2,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"linux-raspberrypi: Upgrade to 6.1.77\n\nSigned-off-by: Khem Raj ","shortMessageHtmlLink":"linux-raspberrypi: Upgrade to 6.1.77"}},{"before":"0f46a1d3768a6093409c0a2da04f3c47a18bde76","after":"ee5ae72808ff9d065650b505bd51d4a11f162c89","ref":"refs/heads/master","pushedAt":"2024-05-28T22:52:53.000Z","pushType":"pr_merge","commitsCount":1,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"recipes: Switch to using UNPACKDIR instead of WORKDIR\n\nUNPACKDIR is new contruct for do_unpack things in latest master\nwe should be using that instead of WORKDIR for referencing those\nfiles\n\nSigned-off-by: Khem Raj ","shortMessageHtmlLink":"recipes: Switch to using UNPACKDIR instead of WORKDIR"}},{"before":null,"after":"0f46a1d3768a6093409c0a2da04f3c47a18bde76","ref":"refs/heads/scarthgap","pushedAt":"2024-05-28T22:51:39.000Z","pushType":"branch_creation","commitsCount":0,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"rpi-cmdline: Fix being renamed of network interfaces\n\nAdd net.ifnames=0 kernel parameter into CMDLINE and make it possible to override.\n\nIf we boot the kernel this way, the network interfaces will not be renamed. Otherwise it will be renamed.\n\nWithout parameter:\n\nroot@raspberrypi3-64:~# ip addr\n1: lo: mtu 65536 qdisc noqueue qlen 1000\n link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00\n inet 127.0.0.1/8 scope host lo\n valid_lft forever preferred_lft forever\n inet6 ::1/128 scope host noprefixroute\n valid_lft forever preferred_lft forever\n2: enu1u1: mtu 1500 qdisc fq_codel qlen 1000\n link/ether b8:27:eb:d9:fd:59 brd ff:ff:ff:ff:ff:ff\n3: wlxb827eb8ca80c: mtu 1500 qdisc noop qlen 1000\n link/ether b8:27:eb:8c:a8:0c brd ff:ff:ff:ff:ff:ff\n\nroot@raspberrypi3-64:~# journalctl | grep wlan\nFeb 27 17:26:08 raspberrypi3-64 kernel: brcmfmac mmc1:0001:1 wlxb827eb8ca80c: renamed from wlan0\nFeb 27 17:26:10 raspberrypi3-64 kernel[296]: [ 8.711897] brcmfmac mmc1:0001:1 wlxb827eb8ca80c: renamed from wlan0\n\nWith parameter:\n\nroot@raspberrypi3-64:~# ip addr\n1: lo: mtu 65536 qdisc noqueue qlen 1000\n link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00\n inet 127.0.0.1/8 scope host lo\n valid_lft forever preferred_lft forever\n inet6 ::1/128 scope host noprefixroute\n valid_lft forever preferred_lft forever\n2: eth0: mtu 1500 qdisc fq_codel qlen 1000\n link/ether b8:27:eb:d9:fd:59 brd ff:ff:ff:ff:ff:ff\n3: wlan0: mtu 1500 qdisc fq_codel qlen 1000\n link/ether b8:27:eb:8c:a8:0c brd ff:ff:ff:ff:ff:ff\n\nSigned-off-by: alperak ","shortMessageHtmlLink":"rpi-cmdline: Fix being renamed of network interfaces"}},{"before":"fb03b44883db64d3e15d1496018169467907c4f1","after":"0f46a1d3768a6093409c0a2da04f3c47a18bde76","ref":"refs/heads/master","pushedAt":"2024-05-28T22:14:17.000Z","pushType":"pr_merge","commitsCount":1,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"rpi-cmdline: Fix being renamed of network interfaces\n\nAdd net.ifnames=0 kernel parameter into CMDLINE and make it possible to override.\n\nIf we boot the kernel this way, the network interfaces will not be renamed. Otherwise it will be renamed.\n\nWithout parameter:\n\nroot@raspberrypi3-64:~# ip addr\n1: lo: mtu 65536 qdisc noqueue qlen 1000\n link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00\n inet 127.0.0.1/8 scope host lo\n valid_lft forever preferred_lft forever\n inet6 ::1/128 scope host noprefixroute\n valid_lft forever preferred_lft forever\n2: enu1u1: mtu 1500 qdisc fq_codel qlen 1000\n link/ether b8:27:eb:d9:fd:59 brd ff:ff:ff:ff:ff:ff\n3: wlxb827eb8ca80c: mtu 1500 qdisc noop qlen 1000\n link/ether b8:27:eb:8c:a8:0c brd ff:ff:ff:ff:ff:ff\n\nroot@raspberrypi3-64:~# journalctl | grep wlan\nFeb 27 17:26:08 raspberrypi3-64 kernel: brcmfmac mmc1:0001:1 wlxb827eb8ca80c: renamed from wlan0\nFeb 27 17:26:10 raspberrypi3-64 kernel[296]: [ 8.711897] brcmfmac mmc1:0001:1 wlxb827eb8ca80c: renamed from wlan0\n\nWith parameter:\n\nroot@raspberrypi3-64:~# ip addr\n1: lo: mtu 65536 qdisc noqueue qlen 1000\n link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00\n inet 127.0.0.1/8 scope host lo\n valid_lft forever preferred_lft forever\n inet6 ::1/128 scope host noprefixroute\n valid_lft forever preferred_lft forever\n2: eth0: mtu 1500 qdisc fq_codel qlen 1000\n link/ether b8:27:eb:d9:fd:59 brd ff:ff:ff:ff:ff:ff\n3: wlan0: mtu 1500 qdisc fq_codel qlen 1000\n link/ether b8:27:eb:8c:a8:0c brd ff:ff:ff:ff:ff:ff\n\nSigned-off-by: alperak ","shortMessageHtmlLink":"rpi-cmdline: Fix being renamed of network interfaces"}},{"before":"9c81413d0b6f41f14f0f9c504d19e312c5b9958f","after":"7a21646e7d547eb3f1d9bf8f045f2be3627b36bc","ref":"refs/heads/mickledore","pushedAt":"2024-05-28T22:10:36.000Z","pushType":"pr_merge","commitsCount":3,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"linux-raspberrypi: Upgrade to 6.1.77\n\nSigned-off-by: Khem Raj ","shortMessageHtmlLink":"linux-raspberrypi: Upgrade to 6.1.77"}},{"before":"6160d0d73707c62c7f635cd5b61c88d559d8b015","after":"fb03b44883db64d3e15d1496018169467907c4f1","ref":"refs/heads/master","pushedAt":"2024-05-28T22:06:18.000Z","pushType":"pr_merge","commitsCount":3,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"raspberrypi5.conf: Fix KERNEL_IMAGETYPE_UBOOT\n\nSimilar to raspberrypi4-64.conf, we need to set KERNEL_IMAGETYPE_UBOOT to\n\"Image\" and set KERNEL_BOOTCMD to \"booti\"\n\nSigned-off-by: Tim Orling ","shortMessageHtmlLink":"raspberrypi5.conf: Fix KERNEL_IMAGETYPE_UBOOT"}},{"before":"1879cb831f4ea3e532cb5ce9fa0f32be917e8fa3","after":"6160d0d73707c62c7f635cd5b61c88d559d8b015","ref":"refs/heads/master","pushedAt":"2024-05-28T21:18:44.000Z","pushType":"pr_merge","commitsCount":2,"pusher":{"login":"agherzan","name":"Andrei Gherzan","path":"/agherzan","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/1746941?s=80&v=4"},"commit":{"message":"linux: drop unused 5.15 version\n\n* 6.1 version was used by default since mickledore:\n https://github.com/agherzan/meta-raspberrypi/commit/12a1187b01644cb444106f7c8f498fbf519be276\n and kirkstone for rpi5 MACHINEs since:\n https://github.com/agherzan/meta-raspberrypi/commit/9dc6673d41044f1174551120ce63501421dbcd85\n\n* scarthgap uses 6.6 by default since:\n https://github.com/agherzan/meta-raspberrypi/commit/1cf3dd5e5ef86c5196c8544853857ab1561c748b\n\n* nobody is probably using 5.15 with newer release and there are issues with \"iw reg\" since\n wireless-regdb upgrade in oe-core as well as shown in:\n https://github.com/agherzan/meta-raspberrypi/pull/1317\n so better to drop it from master/scarthgap together with\n rpi.scc used only for 5.15 and 0001-gcc-plugins-Reorganize-gimple-includes-for-GCC-13.patch\n used only by rpi.scc\n\nSigned-off-by: Martin Jansa ","shortMessageHtmlLink":"linux: drop unused 5.15 version"}}],"hasNextPage":true,"hasPreviousPage":false,"activityType":"all","actor":null,"timePeriod":"all","sort":"DESC","perPage":30,"cursor":"Y3Vyc29yOnYyOpK7MjAyNC0wOS0yM1QyMzoyNzoyOC4wMDAwMDBazwAAAAS-hsQt","startCursor":"Y3Vyc29yOnYyOpK7MjAyNC0wOS0yM1QyMzoyNzoyOC4wMDAwMDBazwAAAAS-hsQt","endCursor":"Y3Vyc29yOnYyOpK7MjAyNC0wNS0yOFQyMToxODo0NC4wMDAwMDBazwAAAARWS5mj"}},"title":"Activity · agherzan/meta-raspberrypi"}