Replies: 7 comments 3 replies
-
I'm using esphome but have the same meter so I came across here. |
Beta Was this translation helpful? Give feedback.
-
That's the snippet I used in the ESPHome yaml:
|
Beta Was this translation helpful? Give feedback.
-
I have the same problem with this smart meter. I enable the info interface and disable pin. With a Handy camera i see, that the right smartmeter led so blinking. I use tasmota 14.0.04 - any solutions?! |
Beta Was this translation helpful? Give feedback.
-
@amnesia106 have you tried the debug mode? |
Beta Was this translation helpful? Give feedback.
-
Hello,
I take a dump and get this.
I also tried the decoder from here https://tasmota-sml-parser.dicp.net/ without luck. schwatter |
Beta Was this translation helpful? Give feedback.
-
Ok, this is crazy. So more i read about SML so more i think my Hex_Code is broken. |
Beta Was this translation helpful? Give feedback.
-
Another Log from Today. Maybe someone can see the right pattern.
|
Beta Was this translation helpful? Give feedback.
-
I've got a new Power-Measurement-Unit (Apator Apox+).
I found in also in the documentation #https://tasmota.github.io/docs/Smart-Meter-Interface/#apator-apox-sml
After unlocking the info output with a pin I put the skript in my tasmota web interface. But I got no data.
Having a look with my mobile-camera the right diode on the smart meter flashes.
Setting the tasmota to debug mode with
Sensor53 d1
results in the following output:But it seems there is no data incoming from the diode.
I'm new to this so I have no idea what the problem could be.
Following test were made:
Any hints are welcome :-)
Thanks in advance
Beta Was this translation helpful? Give feedback.
All reactions