Gosund EP2 > Information: no power monitoring data #22171
Replies: 2 comments 1 reply
-
Since you mention both SP111 and EP2, not clear what you specifically mean, but And make sure to use the template matching your specific hardware variant. (First and last of the 3 templates have the same energy monitoring pins defined) |
Beta Was this translation helpful? Give feedback.
-
Thanks for sharing this clarification. Unfortunately I don't know if this device matches to template v1.1 or v1.4; could you please advise? And my assumption is that I must install firmware |
Beta Was this translation helpful? Give feedback.
-
Hi,
I'm running Tasmota 14.2.0.4 (5d0cc81-lite) on this power plug: Gosund SP111
Generally the plug is working correctly.
However I don't get any power monitoring data in MQTT.
19:45:31.247 MQT: tasmota/plug/gosund-ep2/dev4/STATE = {"Time":"2024-09-19T19:45:31","Uptime":"0T00:00:13","UptimeSec":13,"Vcc":3.478,"Heap":30,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":31,"MqttCount":1,"POWER":"ON","Wifi":{"AP":1,"SSId":"wifi-name","BSSId":"0A:55:31:xx:xx:xx","Channel":6,"Mode":"11n","RSSI":60,"Signal":-70,"LinkCount":1,"Downtime":"0T00:00:05"}}
Can you pleaes advise how to fix this?
THX
Beta Was this translation helpful? Give feedback.
All reactions