Skip to content

Latest commit

 

History

History
54 lines (37 loc) · 1.44 KB

RUN_NR_NFAPI.md

File metadata and controls

54 lines (37 loc) · 1.44 KB

Procedure to run nFAPI in 5G NR

Contributed by 5G Testbed IISc

Developers: Gokul S, Mahesh A, Aniq U R

Procedure to Build gNB and UE

The regular commands to build gNB and UE can be used

sudo ./build_oai --gNB --nrUE

Procedure to run NR nFAPI using RF-Simulator

Bring up another loopback interface

If running for the first time on your computer, or you have restarted your computer, bring up another loopback interface with this command:

sudo ifconfig lo: 127.0.0.2 netmask 255.0.0.0 up

VNF command

sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band78.tm1.106PRB.nfapi.conf --nfapi VNF --noS1 --phy-test

PNF command

sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/oaiL1.nfapi.usrpx300.conf --nfapi PNF --rfsim --phy-test --rfsimulator.serveraddr server

UE command

sudo ./nr-uesoftmodem --rfsim --phy-test -d --rfsimulator.serveraddr 127.0.0.1

Procedure to run NR nFAPI using Hardware (tested with USRP x310)

VNF command

sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band78.tm1.106PRB.nfapi.conf --nfapi VNF --noS1 --phy-test

PNF command

sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/oaiL1.nfapi.usrpx300.conf --nfapi PNF --phy-test

UE command

sudo ./nr-uesoftmodem --usrp-args "addr=*USRP_ADDRESS*,clock_source=external,time_source=external" --phy-test