wg_mult.sh

#!/bin/bash
#wireguard onekey script for centos7+/ubuntu/debian
function blue(){
    echo -e "\033[34m\033[01m$1\033[0m"
}
function green(){
    echo -e "\033[32m\033[01m$1\033[0m"
}
function red(){
    echo -e "\033[31m\033[01m$1\033[0m"
}

function rand(){
    min=$1
    max=$(($2-$min+1))
    num=$(cat /dev/urandom | head -n 10 | cksum | awk -F ' ' '{print $1}')
    echo $(($num%$max+$min))  
}

function version_lt(){
    test "$(echo "$@" | tr " " "\n" | sort -rV | head -n 1)" != "$1"; 
}

function check_selinux(){

    CHECK=$(grep SELINUX= /etc/selinux/config | grep -v "#")
    if [ "$CHECK" == "SELINUX=enforcing" ]; then
        red "============"
        red "关闭SELinux"
        red "============"
        sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config
        setenforce 0
    fi
    if [ "$CHECK" == "SELINUX=permissive" ]; then
        red "============"
        red "关闭SELinux"
        red "============"
        sed -i 's/SELINUX=permissive/SELINUX=disabled/g' /etc/selinux/config
        setenforce 0
    fi
}

function check_release(){

    source /etc/os-release
    RELEASE=$ID
    VERSION=$VERSION_ID

}

function install_tools(){
    if [ "$RELEASE" == "centos" ]; then
        $1 install -y qrencode iptables-services
        systemctl enable iptables 
        systemctl start iptables 
        iptables -F
	service iptables save
    else
        $1 install -y qrencode iptables
    fi
    echo 1 > /proc/sys/net/ipv4/ip_forward
    echo "net.ipv4.ip_forward = 1" >> /etc/sysctl.conf
    sysctl -p

}

function install_wg(){
    check_release
    if [ "$RELEASE" == "centos" ] && [ "$VERSION" == "7" ]; then
        yum install -y yum-utils epel-release
        yum-config-manager --setopt=centosplus.includepkgs=kernel-plus --enablerepo=centosplus --save
        sed -e 's/^DEFAULTKERNEL=kernel$/DEFAULTKERNEL=kernel-plus/' -i /etc/sysconfig/kernel
        yum install -y kernel-plus wireguard-tools
	sed -i "s/GRUB_DEFAULT=saved/GRUB_DEFAULT=0/" /etc/default/grub
        grub2-mkconfig -o /boot/grub2/grub.cfg
        systemctl stop firewalld
        systemctl disable firewalld
        install_tools "yum"
    elif [ "$RELEASE" == "centos" ] && [ "$VERSION" == "8" ]; then
        yum install -y yum-utils epel-release
        yum-config-manager --setopt=centosplus.includepkgs="kernel-plus, kernel-plus-*" --setopt=centosplus.enabled=1 --save
        sed -e 's/^DEFAULTKERNEL=kernel-core$/DEFAULTKERNEL=kernel-plus-core/' -i /etc/sysconfig/kernel
        yum install -y kernel-plus wireguard-tools
	sed -i "s/GRUB_DEFAULT=saved/GRUB_DEFAULT=0/" /etc/default/grub
        grub2-mkconfig -o /boot/grub2/grub.cfg
        systemctl stop firewalld
        systemctl disable firewalld
        install_tools "yum"
    elif [ "$RELEASE" == "ubuntu" ]; then
        if [ "$VERSION" == "12.04" ] || [ "$VERSION" == "16.04" ]; then
	    red "=================="
            red "$RELEASE $VERSION系统暂未支持"
            red "=================="
	    exit
	fi
        systemctl stop ufw
        systemctl disable ufw
	apt-get install -y wget
	wget https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.8.15/amd64/linux-headers-5.8.15-050815-generic_5.8.15-050815.202010141131_amd64.deb
	wget https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.8.15/amd64/linux-headers-5.8.15-050815_5.8.15-050815.202010141131_all.deb
	wget https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.8.15/amd64/linux-image-unsigned-5.8.15-050815-generic_5.8.15-050815.202010141131_amd64.deb
	wget https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.8.15/amd64/linux-modules-5.8.15-050815-generic_5.8.15-050815.202010141131_amd64.deb
	dpkg -i *.deb
	apt-get -y update
        #apt-get install -y software-properties-common
        apt-get install -y openresolv
        #add-apt-repository -y ppa:wireguard/wireguard
        apt-get install -y wireguard
        install_tools "apt-get"
    elif [ "$RELEASE" == "debian" ]; then
        echo "deb http://deb.debian.org/debian buster-backports main" >> /etc/apt/sources.list
        #printf 'Package: *\nPin: release a=unstable\nPin-Priority: 90\n' > /etc/apt/preferences.d/limit-unstable
        apt update
	apt install -y linux-image-5.8.0-0.bpo.2-cloud-amd64
	apt install -y wireguard openresolv
	#apt update
        #apt install -y wireguard
        install_tools "apt"
    else
        red "=================="
        red "$RELEASE $VERSION系统暂未支持"
        red "=================="
    fi
}

function config_wg(){

    mkdir /etc/wireguard
    cd /etc/wireguard
    wg genkey | tee sprivatekey | wg pubkey > spublickey
    wg genkey | tee cprivatekey | wg pubkey > cpublickey
    s1=$(cat sprivatekey)
    s2=$(cat spublickey)
    c1=$(cat cprivatekey)
    c2=$(cat cpublickey)
    serverip=$(curl ipv4.icanhazip.com)
    port=$(rand 10000 60000)
    eth=$(ls /sys/class/net| grep ^e | head -n1)
    chmod 777 -R /etc/wireguard

cat > /etc/wireguard/wg0.conf <<-EOF
[Interface]
PrivateKey = $s1
Address = 10.77.0.1/24 
PostUp   = iptables -A FORWARD -i wg0 -j ACCEPT; iptables -A FORWARD -o wg0 -j ACCEPT; iptables -t nat -A POSTROUTING -o $eth -j MASQUERADE
PostDown = iptables -D FORWARD -i wg0 -j ACCEPT; iptables -D FORWARD -o wg0 -j ACCEPT; iptables -t nat -D POSTROUTING -o $eth -j MASQUERADE
ListenPort = $port
DNS = 8.8.8.8
MTU = 1420
[Peer]
PublicKey = $c2
AllowedIPs = 10.77.0.2/32
EOF

cat > /etc/wireguard/client.conf <<-EOF
[Interface]
PrivateKey = $c1
Address = 10.77.0.2/24 
DNS = 8.8.8.8
MTU = 1420
[Peer]
PublicKey = $s2
Endpoint = $serverip:$port
AllowedIPs = 0.0.0.0/0, ::0/0
PersistentKeepalive = 25
EOF
    #wg-quick up wg0
    systemctl enable wg-quick@wg0
    content=$(cat /etc/wireguard/client.conf)
    green "电脑端请下载/etc/wireguard/client.conf文件，手机端可直接使用软件扫码"
    green "${content}" | qrencode -o - -t UTF8
    red "注意：本次安装必须重启一次, wireguard才能正常使用"
    read -p "是否现在重启 ? [Y/n] :" yn
    [ -z "${yn}" ] && yn="y"
    if [[ $yn == [Yy] ]]; then
        echo -e "VPS 重启中..."
        reboot
    fi
}

function add_user(){

    green "=================================="
    green "给新用户起个名字，不能和已有用户重复"
    green "=================================="
    read -p "请输入用户名：" newname
    cd /etc/wireguard/
    if [ ! -f "/etc/wireguard/$newname.conf" ]; then
        cp client.conf $newname.conf
        wg genkey | tee temprikey | wg pubkey > tempubkey
        ipnum=$(grep Allowed /etc/wireguard/wg0.conf | tail -1 | awk -F '[ ./]' '{print $6}')
        newnum=$((10#${ipnum}+1))
        sed -i 's%^PrivateKey.*$%'"PrivateKey = $(cat temprikey)"'%' $newname.conf
        sed -i 's%^Address.*$%'"Address = 10.77.0.$newnum\/24"'%' $newname.conf
    cat >> /etc/wireguard/wg0.conf <<-EOF
[Peer]
PublicKey = $(cat tempubkey)
AllowedIPs = 10.77.0.$newnum/32
EOF
        wg set wg0 peer $(cat tempubkey) allowed-ips 10.77.0.$newnum/32
        green "============================================="
        green "添加完成，文件：/etc/wireguard/$newname.conf"
        green "============================================="
        rm -f temprikey tempubkey
    else
        red "======================"
        red "用户名已存在，请更换名称"
        red "======================"
    fi

}

function remove_wg(){
    check_release
    if [ -d "/etc/wireguard" ]; then
        wg-quick down wg0
        if [ "$RELEASE" == "centos" ]; then
            yum remove -y wireguard-dkms wireguard-tools
            rm -rf /etc/wireguard/
            green "卸载完成"
        elif [ "$RELEASE" == "ubuntu" ]; then
            apt-get remove -y wireguard
            rm -rf /etc/wireguard/
            green "卸载完成"
        elif [ "$RELEASE" == "debian" ]; then
            apt remove -y wireguard
            rm -rf /etc/wireguard/
            green "卸载完成"
        else
            red "系统不符合要求"
        fi
    else
        red "未检测到wireguard"
    fi
}

function start_menu(){
    clear
    green "==============================================="
    green " 介绍: 一键安装wireguard, 增加wireguard多用户"
    green " 系统: Centos7+/Ubuntu18.04+/Debian9+"
    green " 作者: atrandys www.atrandys.com"
    green " 提示: 脚本安装过程中会升级内核，请勿生产环境使用"
    green "==============================================="
    green "1. 安装wireguard"
    red "2. 删除wireguard"
    green "3. 显示默认用户二维码"
    green "4. 增加用户"
    red "0. 退出"
    echo
    read -p "请选择:" num
    case "$num" in
        1)
        check_selinux
        install_wg
        config_wg
        ;;
        2)
        remove_wg
        ;;
        3)
        content=$(cat /etc/wireguard/client.conf)
        echo "${content}" | qrencode -o - -t UTF8
        ;;
        4)
        add_user
        ;;
        0)
        exit 1
        ;;
        *)
        clear
        red "Please enter the correct number!"
        sleep 1s
        start_menu
        ;;
        esac
}

start_menu