diff --git a/add-anchor-peer/README.md b/add-anchor-peer/README.md
new file mode 100644
index 00000000..09c69f17
--- /dev/null
+++ b/add-anchor-peer/README.md
@@ -0,0 +1,32 @@
+# Script to add Anchor Peer to a channel in Amazon Managed Blockchian for Hyperledger Fabric
+
+This script helps to add an [Anchor Peer](https://hyperledger-fabric.readthedocs.io/en/release-1.4/glossary.html#anchor-peer) 
+to a channel in Amazon Managed Blockchain for Hyperledger Fabric network. To set up an EC2 instance with Hyperledger Fabric client and 
+create a new channel, please follow the steps in [Getting Started Tutorial](https://docs.aws.amazon.com/managed-blockchain/latest/managementguide/managed-blockchain-get-started-tutorial.html).
+
+## Pre-requisites
+ - [An EC2 instance with Hyperledger Fabric client CLI docker container.](https://docs.aws.amazon.com/managed-blockchain/latest/managementguide/get-started-create-client.html)
+ - `jq` tool, installed on an EC2 instance with Hyperledger Fabric client CLI.
+    To install `jq` tool, run the following command on your EC2 instance: `sudo yum install jq`
+
+## Usage
+
+```
+    ./configureAnchorPeer.sh \
+    --channelName "<CHANNEL_NAME>" \
+    --memberId "<AMB_MEMBER_ID>" \
+    --peerAddress "<PEER_ENDPOINT>" \
+    --ordererAddress "<ORDERING_SERVICE_ENDPOINT>"
+```
+
+If you are using ngo workshop setup please set an optional parameter `--mspPath MSP_PATH`
+    
+### Usage example:
+
+- Using EC instance with Hyperledger Fabric client CLI docker container from documentation:
+  
+    `./configureAnchorPeer.sh --channelName "mychannel" --memberId "m-JNF6WTCRZJEPTBF6FXLD44KVEM" --peerAddress "nd-veqmnn7wfffbhazm4mg4i3fbz4.m-jnf6wtcrzjeptbf6fxld44kvem.n-roc33c2uibfnnbmowgpyi74lfe.managedblockchain.us-east-1.amazonaws.com:30003" --ordererAddress "orderer.n-roc33c2uibfnnbmowgpyi74lfe.managedblockchain.us-east-1.amazonaws.com:30001"`
+
+- Using setup form NGO workshop:
+
+    `./configureAnchorPeer.sh --channelName "mychannel" --memberId "m-JNF6WTCRZJEPTBF6FXLD44KVEM" --peerAddress "nd-veqmnn7wfffbhazm4mg4i3fbz4.m-jnf6wtcrzjeptbf6fxld44kvem.n-roc33c2uibfnnbmowgpyi74lfe.managedblockchain.us-east-1.amazonaws.com:30003" --ordererAddress "orderer.n-roc33c2uibfnnbmowgpyi74lfe.managedblockchain.us-east-1.amazonaws.com:30001" --mspPath "/opt/home/admin-msp"`
\ No newline at end of file
diff --git a/add-anchor-peer/configureAnchorPeer.sh b/add-anchor-peer/configureAnchorPeer.sh
new file mode 100644
index 00000000..4d7d619d
--- /dev/null
+++ b/add-anchor-peer/configureAnchorPeer.sh
@@ -0,0 +1,139 @@
+#!/bin/bash
+
+print_usage() {
+    echo "Usage:"
+    echo " ./configureAnchorPeer.sh [--channelName CHANNEL_NAME] [--memberId AMB_MEMBER_ID] [--peerAddress PEER_ENDPOINT] [--ordererAddress ORDERER_ENDPOINT]"
+    echo " "
+    echo "  Optional:"
+    echo "  If you are using ngo workshop setup please set [--mspPath MSP_PATH]"
+    echo " "
+    echo "Usage example:"
+    echo "  ./configureAnchorPeer.sh --channelName \"mychannel\" --memberId \"m-JNF6WTCRZJEPTBF6FXLD44KVEM\" --peerAddress \"nd-veqmnn7wfffbhazm4mg4i3fbz4.m-jnf6wtcrzjeptbf6fxld44kvem.n-roc33c2uibfnnbmowgpyi74lfe.managedblockchain.us-east-1.amazonaws.com:30003\" --ordererAddress \"orderer.n-roc33c2uibfnnbmowgpyi74lfe.managedblockchain.us-east-1.amazonaws.com:30001\" --mspPath \"/opt/home/admin-msp\""
+    echo " "
+}
+
+
+while test $# -gt 0; do
+  case "$1" in
+        --channelName)
+            shift
+            export CHANNEL_NAME=$1
+            shift
+            ;;
+        --memberId)
+            shift
+            export AMB_MEMBER_ID=$1
+            export MSP=$AMB_MEMBER_ID
+            shift
+            ;;
+        --peerAddress)
+            shift
+            export PEER=$1
+            shift
+            ;;
+        --ordererAddress)
+            shift
+            export ORDERER=$1
+            shift
+            ;;
+        --mspPath)
+            shift
+            export MSP_PATH=$1
+            shift
+            ;;
+        *)
+          break
+          ;;
+      esac
+done
+
+if [ -z "$CHANNEL_NAME" ]
+then
+    echo "CHANNEL_NAME is not set. Please set it as environment variable CHANNEL_NAME or use \"channelName=\" flag."
+    print_usage
+    exit 1
+fi
+
+if [ -z "$AMB_MEMBER_ID" ]
+then
+    echo "AMB_MEMBER_ID is not set. Please set it as environment variable AMB_MEMBER_ID or use \"memberId=\" flag."
+    print_usage
+    exit 1
+fi
+
+if [ -z "$PEER" ]
+then
+    echo "PEER is not set. Please set it as environment variable PEER or use \"peerAddress=\" flag."
+    print_usage
+    exit 1
+fi
+
+if [ -z "$ORDERER" ]
+then
+    echo "ORDERER is not set. Please set it as environment variable ORDERER or use \"ordererAddress=\" flag."
+    print_usage
+    exit 1
+fi
+
+IFS=: read -r PEER_DNS_NAME PEER_PORT_NUMBER <<< "$PEER"
+
+echo " "
+echo "Initialized with the following config:"
+echo "CHANNEL_NAME     : $CHANNEL_NAME";
+echo "AMB_MEMBER_ID    : $AMB_MEMBER_ID";
+echo "PEER             : $PEER";
+echo "PEER_DNS_NAME    : $PEER_DNS_NAME";
+echo "PEER_PORT_NUMBER : $PEER_PORT_NUMBER";
+echo "ORDERER          : $ORDERER";
+
+cd /home/ec2-user
+
+rm -rf ./channel-artifacts && mkdir ./channel-artifacts
+
+if [ -z "$MSP_PATH" ]
+    then
+        docker exec cli peer channel fetch config /opt/home/channel-artifacts/$CHANNEL_NAME.pb -c $CHANNEL_NAME -o $ORDERER --cafile /opt/home/managedblockchain-tls-chain.pem --tls
+    else
+        docker exec -e "CORE_PEER_TLS_ENABLED=true" -e "CORE_PEER_TLS_ROOTCERT_FILE=/opt/home/managedblockchain-tls-chain.pem" \
+        -e "CORE_PEER_ADDRESS=$PEER" -e "CORE_PEER_LOCALMSPID=$MSP" -e "CORE_PEER_MSPCONFIGPATH=$MSP_PATH" \
+        cli peer channel fetch config /opt/home/channel-artifacts/$CHANNEL_NAME.pb -c $CHANNEL_NAME -o $ORDERER --cafile /opt/home/managedblockchain-tls-chain.pem --tls
+fi
+
+docker exec cli configtxlator proto_decode --input /opt/home/channel-artifacts/$CHANNEL_NAME.pb --type common.Block --output /opt/home/channel-artifacts/config_block.json
+
+cd channel-artifacts
+
+sudo jq .data.data[0].payload.data.config config_block.json > config.json
+
+cp config.json config_copy.json
+
+jq '.channel_group.groups.Application.groups["'$AMB_MEMBER_ID'"].values += {"AnchorPeers":{"mod_policy": "Admins","value":{"anchor_peers": [{"host": "'$PEER_DNS_NAME'","port": '$PEER_PORT_NUMBER'}]},"version": "0"}}' config_copy.json > modified_config.json
+
+docker exec cli configtxlator proto_encode --input /opt/home/channel-artifacts/config.json --type common.Config --output /opt/home/channel-artifacts/config.pb
+
+docker exec cli configtxlator proto_encode --input /opt/home/channel-artifacts/modified_config.json --type common.Config --output /opt/home/channel-artifacts/modified_config.pb
+
+docker exec cli configtxlator compute_update --channel_id $CHANNEL_NAME --original /opt/home/channel-artifacts/config.pb --updated /opt/home/channel-artifacts/modified_config.pb --output /opt/home/channel-artifacts/config_update.pb
+
+docker exec cli configtxlator proto_decode --input /opt/home/channel-artifacts/config_update.pb --type common.ConfigUpdate --output /opt/home/channel-artifacts/config_update.json
+
+sudo chmod 755 config_update.json
+
+echo '{"payload":{"header":{"channel_header":{"channel_id":"'$CHANNEL_NAME'", "type":2}},"data":{"config_update":'$(cat config_update.json)'}}}' | jq . > config_update_in_envelope.json
+
+docker exec cli configtxlator proto_encode --input /opt/home/channel-artifacts/config_update_in_envelope.json --type common.Envelope --output /opt/home/channel-artifacts/config_update_in_envelope.pb
+
+if [ -z "$MSP_PATH" ]
+    then
+        docker exec cli peer channel update -f /opt/home/channel-artifacts/config_update_in_envelope.pb -c $CHANNEL_NAME -o $ORDERER --cafile /opt/home/managedblockchain-tls-chain.pem --tls
+    else
+        docker exec -e "CORE_PEER_TLS_ENABLED=true" -e "CORE_PEER_TLS_ROOTCERT_FILE=/opt/home/managedblockchain-tls-chain.pem" \
+        -e "CORE_PEER_ADDRESS=$PEER" -e "CORE_PEER_LOCALMSPID=$MSP" -e "CORE_PEER_MSPCONFIGPATH=$MSP_PATH" \
+        cli peer channel update -f /opt/home/channel-artifacts/config_update_in_envelope.pb -c $CHANNEL_NAME -o $ORDERER --cafile /opt/home/managedblockchain-tls-chain.pem --tls
+fi
+
+echo " "
+echo "Done"
+
+#2020-08-28 08:37:36.806 UTC [channelCmd] InitCmdFactory -> INFO 001 Endorser and orderer connections initialized
+#2020-08-28 08:37:36.887 UTC [channelCmd] update -> INFO 002 Successfully submitted channel update
\ No newline at end of file