usb strangeness with openbsd host

[eau-u4f]

trying to plug the precursor (0.9.14) on an openbsd (-current close to 7.4 these days) machine through USB, I get the following on the host machine kernel log:
uhub1: device problem, disabling port 5

not sure what this means since I did not really investigate deeper right as traveling, does that ring a bell?

openbsd line in kernel:
https://github.com/openbsd/src/blob/master/sys/dev/usb/uhub.c#L604

if not, I guess, I'll dig and/or recompile kernel with debug to track down what's happening.. in the following days..

[qbit]

Have you tried another cable? Is this in just regular mode on the precursor (not trying to do auto-type or anything?)?

[qbit]

On OpenBSD current I get the following when I connect the cable:

ugen0 at uhub0 port 2 "Foosn Precursor pvt2" rev 2.00/1.01 addr 2

And in "vault mode" I get:

uhidev0 at uhub0 port 2 configuration 1 interface 0 "Kosagi Precursor" rev 2.10/0.10 addr 2
uhidev0: iclass 3/0
fido0 at uhidev0: input=64, output=64, feature=0
uhidev1 at uhub0 port 2 configuration 1 interface 1 "Kosagi Precursor" rev 2.10/0.10 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 128 variable keys, 0 key codes

[eau-u4f]

which release of OpenBSD, which release of xous? I am running the latest stable xous (0.9.14) and OpenBSD 7.4
I triggered usb debug to be able to use the precursor updater on my precursor and face that strange behaviour when I plug it in.
do you see it when you # usbdevs?

[qbit]

OpenBSD 7.4 hasn’t been released yet. As I said, I am on current. Latest FWs on the precursor.

if your showing 7.4 you are running snapshots (current).

Did you try a new cable? Perhaps your usb port isn’t supplying enough juice?

I triggered usb debug

I don’t know what you mean by this.

[qbit]

usbdevs -vv when running Shellchat:

addr 02: 1209:5bf0 Foosn, Precursor pvt2
         full speed, power 100 mA, config 1, rev 1.01
         driver: ugen0

[qbit]

in Vault:

addr 02: 1209:3613 Kosagi, Precursor
         full speed, power 100 mA, config 1, rev 0.10, iSerial 1a452a193ea85c
         driver: uhidev0
         driver: uhidev1

[eau-u4f]

yeah i have none of those, just the device problem.
I anticipated the release since the package and the src were in freeze and release process was on going, the last snapshot was most likely to be 7.4.

I triggered usb debug, as to connect and make updates to the precursor you need to put the device in usb debug in shellchat.