Skip to content

Latest commit

 

History

History
278 lines (193 loc) · 8.91 KB

README.md

File metadata and controls

278 lines (193 loc) · 8.91 KB
Raw

Multinode Ceph on Vagrant

This workshop walks users through setting up a 3-node Ceph cluster and mounting a block device, using a CephFS mount, and storing a blob oject.

It follows the following Ceph user guides:

Note that after many commands, you may see something like:

Unhandled exception in thread started by
sys.excepthook is missing
lost sys.stderr

I'm not sure what this means, but everything seems to have completed successfully, and the cluster will work.

Install prerequisites

Install Vagrant and a provider such as VirtualBox.

We'll also need the vagrant-cachier and vagrant-hostmanager plugins:

$ vagrant plugin install vagrant-cachier
$ vagrant plugin install vagrant-hostmanager

Add your Vagrant key to the SSH agent

Since the admin machine will need the Vagrant SSH key to log into the server machines, we need to add it to our local SSH agent:

On Mac:

$ ssh-add -K ~/.vagrant.d/insecure_private_key

On *nix:

$ ssh-add -k ~/.vagrant.d/insecure_private_key

Start the VMs

This instructs Vagrant to start the VMs and install ceph-deploy on the admin machine.

$ vagrant up

Create the cluster

We'll create a simple cluster and make sure it's healthy. Then, we'll expand it.

First, we need to get an interactive shell on the admin machine:

$ vagrant ssh ceph-admin

The ceph-deploy tool will write configuration files and logs to the current directory. So, let's create a directory for the new cluster:

vagrant@ceph-admin:~$ mkdir test-cluster && cd test-cluster

Let's prepare the machines:

vagrant@ceph-admin:~/test-cluster$ ceph-deploy new ceph-server-1 ceph-server-2 ceph-server-3

Now, we have to change a default setting. For our initial cluster, we are only going to have two object storage daemons. We need to tell Ceph to allow us to achieve an active + clean state with just two Ceph OSDs. Add osd pool default size = 2 to ./ceph.conf.

Because we're dealing with multiple VMs sharing the same host, we can expect to see more clock skew. We can tell Ceph that we'd like to tolerate slightly more clock skew by adding the following section to ceph.conf:

mon_clock_drift_allowed = 1

After these few changes, the file should look similar to:

[global]
fsid = 7acac25d-2bd8-4911-807e-e35377e741bf
mon_initial_members = ceph-server-1, ceph-server-2, ceph-server-3
mon_host = 172.21.12.12,172.21.12.13,172.21.12.14
auth_cluster_required = cephx
auth_service_required = cephx
auth_client_required = cephx
osd pool default size = 2
mon_clock_drift_allowed = 1

Install Ceph

We're finally ready to install!

Note here that we specify the Ceph release we'd like to install, which is luminous.

vagrant@ceph-admin:~/test-cluster$ ceph-deploy install --release=luminous ceph-admin ceph-server-1 ceph-server-2 ceph-server-3 ceph-client

Configure monitor and OSD services

Next, we add a monitor node:

vagrant@ceph-admin:~/test-cluster$ ceph-deploy mon create-initial

And our two OSDs. For these, we need to log into the server machines directly:

vagrant@ceph-admin:~/test-cluster$ ssh ceph-server-2 "sudo mkdir /var/local/osd0 && sudo chown ceph:ceph /var/local/osd0"
vagrant@ceph-admin:~/test-cluster$ ssh ceph-server-3 "sudo mkdir /var/local/osd1 && sudo chown ceph:ceph /var/local/osd1"

Now we can prepare and activate the OSDs:

vagrant@ceph-admin:~/test-cluster$ ceph-deploy osd prepare ceph-server-2:/var/local/osd0 ceph-server-3:/var/local/osd1
vagrant@ceph-admin:~/test-cluster$ ceph-deploy osd activate ceph-server-2:/var/local/osd0 ceph-server-3:/var/local/osd1

Configuration and status

We can copy our config file and admin key to all the nodes, so each one can use the ceph CLI.

vagrant@ceph-admin:~/test-cluster$ ceph-deploy admin ceph-admin ceph-server-1 ceph-server-2 ceph-server-3 ceph-client

We also should make sure the keyring is readable:

vagrant@ceph-admin:~/test-cluster$ sudo chmod +r /etc/ceph/ceph.client.admin.keyring
vagrant@ceph-admin:~/test-cluster$ ssh ceph-server-1 sudo chmod +r /etc/ceph/ceph.client.admin.keyring
vagrant@ceph-admin:~/test-cluster$ ssh ceph-server-2 sudo chmod +r /etc/ceph/ceph.client.admin.keyring
vagrant@ceph-admin:~/test-cluster$ ssh ceph-server-3 sudo chmod +r /etc/ceph/ceph.client.admin.keyring

We also need to create a manager for the cluster. In this case, we make ceph-admin the manager:

vagrant@ceph-admin:~/test-cluster$ ceph-deploy mgr create ceph-admin:mon_mgr

Finally, check on the health of the cluster:

vagrant@ceph-admin:~/test-cluster$ ceph health

You should see something similar to this once it's healthy:

vagrant@ceph-admin:~/test-cluster$ ceph health
HEALTH_OK
vagrant@ceph-admin:~/test-cluster$ ceph -s
    cluster 18197927-3d77-4064-b9be-bba972b00750
     health HEALTH_OK
     monmap e2: 3 mons at {ceph-server-1=172.21.12.12:6789/0,ceph-server-2=172.21.12.13:6789/0,ceph-server-3=172.21.12.14:6789/0}, election epoch 6, quorum 0,1,2 ceph-server-1,ceph-server-2,ceph-server-3
     osdmap e9: 2 osds: 2 up, 2 in
      pgmap v13: 192 pgs, 3 pools, 0 bytes data, 0 objects
            12485 MB used, 64692 MB / 80568 MB avail
                 192 active+clean

Notice that we have two OSDs (osdmap e9: 2 osds: 2 up, 2 in) and all of the placement groups (pgs) are reporting as active+clean.

Congratulations!

Expanding the cluster

To more closely model a production cluster, we're going to add one more OSD daemon and a Ceph Metadata Server. We'll also add monitors to all hosts instead of just one.

Add an OSD

vagrant@ceph-admin:~/test-cluster$ ssh ceph-server-1 "sudo mkdir /var/local/osd2 && sudo chown ceph:ceph /var/local/osd2"

Now, from the admin node, we prepare and activate the OSD:

vagrant@ceph-admin:~/test-cluster$ ceph-deploy osd prepare ceph-server-1:/var/local/osd2
vagrant@ceph-admin:~/test-cluster$ ceph-deploy osd activate ceph-server-1:/var/local/osd2

Watch the rebalancing:

vagrant@ceph-admin:~/test-cluster$ ceph -w

You should eventually see it return to an active+clean state, but this time with 3 OSDs:

vagrant@ceph-admin:~/test-cluster$ ceph -w
    cluster 18197927-3d77-4064-b9be-bba972b00750
     health HEALTH_OK
     monmap e2: 3 mons at {ceph-server-1=172.21.12.12:6789/0,ceph-server-2=172.21.12.13:6789/0,ceph-server-3=172.21.12.14:6789/0}, election epoch 30, quorum 0,1,2 ceph-server-1,ceph-server-2,ceph-server-3
     osdmap e38: 3 osds: 3 up, 3 in
      pgmap v415: 192 pgs, 3 pools, 0 bytes data, 0 objects
            18752 MB used, 97014 MB / 118 GB avail
                 192 active+clean

Add metadata server

Let's add a metadata server to server1:

vagrant@ceph-admin:~/test-cluster$ ceph-deploy mds create ceph-server-1

Add more monitors

We add monitors to servers 2 and 3.

vagrant@ceph-admin:~/test-cluster$ ceph-deploy mon create ceph-server-2 ceph-server-3

Watch the quorum status, and ensure it's happy:

vagrant@ceph-admin:~/test-cluster$ ceph quorum_status --format json-pretty

Create a default rbd pool:

vagrant@ceph-admin:~/test-cluster$ ceph osd pool create rbd 150 150

Install Ceph Object Gateway

TODO

Play around!

Now that we have everything set up, let's actually use the cluster. We'll use the ceph-client machine for this.

Create a block device

$ vagrant ssh ceph-client
vagrant@ceph-client:~$ sudo rbd create foo --size 4096 -m ceph-server-1
vagrant@ceph-client:~$ sudo rbd map foo --pool rbd --name client.admin -m ceph-server-1
vagrant@ceph-client:~$ sudo mkfs.ext4 -m0 /dev/rbd/rbd/foo
vagrant@ceph-client:~$ sudo mkdir /mnt/ceph-block-device
vagrant@ceph-client:~$ sudo mount /dev/rbd/rbd/foo /mnt/ceph-block-device

Create a mount with Ceph FS

TODO

Store a blob object

TODO

Cleanup

When you're all done, tell Vagrant to destroy the VMs.

$ vagrant destroy -f