diff --git a/ScalableTestSuite/Electrical/TransmissionLine.mo b/ScalableTestSuite/Electrical/TransmissionLine.mo index 89a1a48..3a5c2af 100644 --- a/ScalableTestSuite/Electrical/TransmissionLine.mo +++ b/ScalableTestSuite/Electrical/TransmissionLine.mo @@ -258,7 +258,7 @@ package TransmissionLine "Models of transmission lines" voltage_equations = tlm2.vol[N]; voltage_equations_delayed = delay(tlm2.vol[1], TD); voltage_modelica_delayed = delay(tlm1.signalvoltage.p.v, TD); - annotation(experiment(StopTime = 4e-6, Tolerance = 1e-8), Documentation(info = "

In this model, the verification of the TransmissionLineModelica and the TransmissionLineEquations are performed.The formula of the time delay is used for the verification of the implemented transmission line circuit models to check whether the time delay of the models satisfies the theoretical one. Time delay between the ends of a transmission line can be calculated as follows:

Therefore, using the time delay formula, input voltages of the both models are delayed by the theoretical time delay. Moreover, it is checked whether the output voltages of the transmission line circuit models are matching with the delayed input voltages.

The parameters for the TransmissionLineCheck are:

+ annotation(experiment(StopTime = 4e-6, Interval=2e-9, Tolerance = 1e-8), Documentation(info = "

In this model, the verification of the TransmissionLineModelica and the TransmissionLineEquations are performed.The formula of the time delay is used for the verification of the implemented transmission line circuit models to check whether the time delay of the models satisfies the theoretical one. Time delay between the ends of a transmission line can be calculated as follows:

Therefore, using the time delay formula, input voltages of the both models are delayed by the theoretical time delay. Moreover, it is checked whether the output voltages of the transmission line circuit models are matching with the delayed input voltages.

The parameters for the TransmissionLineCheck are:

@@ -309,98 +309,98 @@ package TransmissionLine "Models of transmission lines" model TransmissionLineEquations_N_10 extends Models.TransmissionLineEquations(N = 10, L = 100, res = 48e-6, cap = 101e-12, ind = 253e-9, w = 1 / 2e-7); - annotation(experiment(StopTime = 4e-6, Tolerance = 1e-8), + annotation(experiment(StopTime = 4e-6, Interval=2e-9, Tolerance = 1e-8), __OpenModelica_simulationFlags(s = "ida")); end TransmissionLineEquations_N_10; model TransmissionLineEquations_N_20 extends TransmissionLineEquations_N_10(N = 20); - annotation(experiment(StopTime = 4e-6, Tolerance = 1e-8), + annotation(experiment(StopTime = 4e-6, Interval=2e-9, Tolerance = 1e-8), __OpenModelica_simulationFlags(s = "ida")); end TransmissionLineEquations_N_20; model TransmissionLineEquations_N_40 extends TransmissionLineEquations_N_10(N = 40); - annotation(experiment(StopTime = 4e-6, Tolerance = 1e-8), + annotation(experiment(StopTime = 4e-6, Interval=2e-9, Tolerance = 1e-8), __OpenModelica_simulationFlags(s = "ida")); end TransmissionLineEquations_N_40; model TransmissionLineEquations_N_80 extends TransmissionLineEquations_N_10(N = 80); - annotation(experiment(StopTime = 4e-6, Tolerance = 1e-8), + annotation(experiment(StopTime = 4e-6, Interval=2e-9, Tolerance = 1e-8), __OpenModelica_simulationFlags(s = "ida")); end TransmissionLineEquations_N_80; model TransmissionLineEquations_N_160 extends TransmissionLineEquations_N_10(N = 160); - annotation(experiment(StopTime = 4e-6, Tolerance = 1e-8), + annotation(experiment(StopTime = 4e-6, Interval=2e-9, Tolerance = 1e-8), __OpenModelica_simulationFlags(s = "ida")); end TransmissionLineEquations_N_160; model TransmissionLineEquations_N_320 extends TransmissionLineEquations_N_10(N = 320); - annotation(experiment(StopTime = 4e-6, Tolerance = 1e-8), + annotation(experiment(StopTime = 4e-6, Interval=2e-9, Tolerance = 1e-8), __OpenModelica_simulationFlags(s = "ida")); end TransmissionLineEquations_N_320; model TransmissionLineEquations_N_640 extends TransmissionLineEquations_N_10(N = 640); - annotation(experiment(StopTime = 4e-6, Tolerance = 1e-8), + annotation(experiment(StopTime = 4e-6, Interval=2e-9, Tolerance = 1e-8), __OpenModelica_simulationFlags(s = "ida")); end TransmissionLineEquations_N_640; model TransmissionLineEquations_N_1280 extends TransmissionLineEquations_N_10(N = 1280); - annotation(experiment(StopTime = 4e-6, Tolerance = 1e-8), + annotation(experiment(StopTime = 4e-6, Interval=2e-9, Tolerance = 1e-8), __OpenModelica_simulationFlags(s = "ida")); end TransmissionLineEquations_N_1280; model TransmissionLineModelica_N_10 extends Models.TransmissionLineModelica(N = 10, r = 48e-6, c = 101e-12, l = 253e-9, length = 100, w = 1 / 2e-7); - annotation(experiment(StopTime = 4e-6, Tolerance = 1e-8), + annotation(experiment(StopTime = 4e-6, Interval=2e-9, Tolerance = 1e-8), __OpenModelica_simulationFlags(s = "ida")); end TransmissionLineModelica_N_10; model TransmissionLineModelica_N_20 extends TransmissionLineModelica_N_10(N = 20); - annotation(experiment(StopTime = 4e-6, Tolerance = 1e-8), + annotation(experiment(StopTime = 4e-6, Interval=2e-9, Tolerance = 1e-8), __OpenModelica_simulationFlags(s = "ida")); end TransmissionLineModelica_N_20; model TransmissionLineModelica_N_40 extends TransmissionLineModelica_N_10(N = 40); - annotation(experiment(StopTime = 4e-6, Tolerance = 1e-8), + annotation(experiment(StopTime = 4e-6, Interval=2e-9, Tolerance = 1e-8), __OpenModelica_simulationFlags(s = "ida")); end TransmissionLineModelica_N_40; model TransmissionLineModelica_N_80 extends TransmissionLineModelica_N_10(N = 80); - annotation(experiment(StopTime = 4e-6, Tolerance = 1e-8), + annotation(experiment(StopTime = 4e-6, Interval=2e-9, Tolerance = 1e-8), __OpenModelica_simulationFlags(s = "ida")); end TransmissionLineModelica_N_80; model TransmissionLineModelica_N_160 extends TransmissionLineModelica_N_10(N = 160); - annotation(experiment(StopTime = 4e-6, Tolerance = 1e-8), + annotation(experiment(StopTime = 4e-6, Interval=2e-9, Tolerance = 1e-8), __OpenModelica_simulationFlags(s = "ida")); end TransmissionLineModelica_N_160; model TransmissionLineModelica_N_320 extends TransmissionLineModelica_N_10(N = 320); - annotation(experiment(StopTime = 4e-6, Tolerance = 1e-8), + annotation(experiment(StopTime = 4e-6, Interval=2e-9, Tolerance = 1e-8), __OpenModelica_simulationFlags(s = "ida")); end TransmissionLineModelica_N_320; model TransmissionLineModelica_N_640 extends TransmissionLineModelica_N_10(N = 640); - annotation(experiment(StopTime = 4e-6, Tolerance = 1e-8), + annotation(experiment(StopTime = 4e-6, Interval=2e-9, Tolerance = 1e-8), __OpenModelica_simulationFlags(s = "ida")); end TransmissionLineModelica_N_640; model TransmissionLineModelica_N_1280 extends TransmissionLineModelica_N_10(N = 1280); - annotation(experiment(StopTime = 4e-6, Tolerance = 1e-8), + annotation(experiment(StopTime = 4e-6, Interval=2e-9, Tolerance = 1e-8), __OpenModelica_simulationFlags(s = "ida")); end TransmissionLineModelica_N_1280; annotation(Documentation(info = "

In this package there are 16 tests for different N values; 8 for the TransmissionLineModelica and 8 for the TransmissionLineEquations.

The tests for the both models are performed according to the N values as shown in the table below:

Parameters Comment
diff --git a/ScalableTestSuite/Thermal/Advection.mo b/ScalableTestSuite/Thermal/Advection.mo index 601e359..204501b 100644 --- a/ScalableTestSuite/Thermal/Advection.mo +++ b/ScalableTestSuite/Thermal/Advection.mo @@ -170,14 +170,10 @@ package Advection "1D advection models" model SteamPipe extends Models.SteamPipe(w_in_pipe = 2, N = 100); Medium.SpecificEnthalpy h_out_pipe_th = delay(h_in_pipe, tau); - annotation (experiment(StopTime=15, Interval=4e-3, Tolerance = 1e-7, + annotation (experiment(StopTime=15, Interval=4e-3, Tolerance = 1e-7), Documentation(info="

After the initial transient has settled down, the step change of the specific enthalpy at the inlet is propagated to the outlet at a velocity roughly equal to that of the fluid. The outlet specific enthalpy is approximately equal to the inlet enthalpy delayed by the ratio tau between the total mass and the mass flow rate. There is a significant effect of numerical diffusion even for large values of N.

-"), - experiment( - StopTime=20, - NumberOfIntervals=5000, - Tolerance=1e-007)); +")); end SteamPipe; end Verification; @@ -197,47 +193,47 @@ package Advection "1D advection models" "Temperature increase at inlet"; parameter Modelica.SIunits.Frequency f = 0.5 "Frequency of fluid speed oscillations"; - annotation (experiment(StopTime=20, NumberOfIntervals=5000, Tolerance = 1e-6)); + annotation (experiment(StopTime=20, Interval=4e-3, Tolerance = 1e-6)); end SimpleAdvection_N_100; model SimpleAdvection_N_200 extends SimpleAdvection_N_100(N = 200); - annotation (experiment(StopTime=20, NumberOfIntervals=5000, Tolerance = 1e-6)); + annotation (experiment(StopTime=20, Interval=4e-3, Tolerance = 1e-6)); end SimpleAdvection_N_200; model SimpleAdvection_N_400 extends SimpleAdvection_N_100(N = 400); - annotation (experiment(StopTime=20, NumberOfIntervals=5000, Tolerance = 1e-6), + annotation (experiment(StopTime=20, Interval=4e-3, Tolerance = 1e-6), __OpenModelica_simulationFlags(s = "ida")); end SimpleAdvection_N_400; model SimpleAdvection_N_800 extends SimpleAdvection_N_100(N = 800); - annotation (experiment(StopTime=20, NumberOfIntervals=5000, Tolerance = 1e-6), + annotation (experiment(StopTime=20, Interval=4e-3, Tolerance = 1e-6), __OpenModelica_simulationFlags(s = "ida")); end SimpleAdvection_N_800; model SimpleAdvection_N_1600 extends SimpleAdvection_N_100(N = 1600); - annotation (experiment(StopTime=20, NumberOfIntervals=5000, Tolerance = 1e-6), + annotation (experiment(StopTime=20, Interval=4e-3, Tolerance = 1e-6), __OpenModelica_simulationFlags(s = "ida")); end SimpleAdvection_N_1600; model SimpleAdvection_N_3200 extends SimpleAdvection_N_100(N = 3200); - annotation (experiment(StopTime=20, NumberOfIntervals=5000, Tolerance = 1e-6), + annotation (experiment(StopTime=20, Interval=4e-3, Tolerance = 1e-6), __OpenModelica_simulationFlags(s = "ida")); end SimpleAdvection_N_3200; model SimpleAdvection_N_6400 extends SimpleAdvection_N_100(N = 6400); - annotation (experiment(StopTime=20, NumberOfIntervals=5000, Tolerance = 1e-6), + annotation (experiment(StopTime=20, Interval=4e-3, Tolerance = 1e-6), __OpenModelica_simulationFlags(s = "ida")); end SimpleAdvection_N_6400; model SimpleAdvection_N_12800 extends SimpleAdvection_N_100(N = 12800); - annotation (experiment(StopTime=20, NumberOfIntervals=5000, Tolerance = 1e-6), + annotation (experiment(StopTime=20, Interval=4e-3, Tolerance = 1e-6), __OpenModelica_simulationFlags(s = "ida")); end SimpleAdvection_N_12800; @@ -245,21 +241,21 @@ package Advection "1D advection models" extends Models.AdvectionReaction( N = 100, mu = 500); - annotation (experiment(StopTime=1, NumberOfIntervals=5000, Tolerance = 1e-6)); + annotation (experiment(StopTime=1, Interval=4e-3, Tolerance = 1e-6)); end AdvectionReaction_N_100; model AdvectionReaction_N_200 extends Models.AdvectionReaction( N = 200, mu = 1000); - annotation (experiment(StopTime=1, NumberOfIntervals=5000, Tolerance = 1e-6)); + annotation (experiment(StopTime=1, Interval=4e-3, Tolerance = 1e-6)); end AdvectionReaction_N_200; model AdvectionReaction_N_400 extends Models.AdvectionReaction( N = 400, mu = 2000); - annotation (experiment(StopTime=1, NumberOfIntervals=5000, Tolerance = 1e-6), + annotation (experiment(StopTime=1, Interval=4e-3, Tolerance = 1e-6), __OpenModelica_simulationFlags(s = "ida")); end AdvectionReaction_N_400; @@ -267,7 +263,7 @@ package Advection "1D advection models" extends Models.AdvectionReaction( N = 800, mu = 4000); - annotation (experiment(StopTime=1, NumberOfIntervals=5000, Tolerance = 1e-6), + annotation (experiment(StopTime=1, Interval=4e-3, Tolerance = 1e-6), __OpenModelica_simulationFlags(s = "ida")); end AdvectionReaction_N_800; @@ -275,7 +271,7 @@ package Advection "1D advection models" extends Models.AdvectionReaction( N = 1600, mu = 8000); - annotation (experiment(StopTime=1, NumberOfIntervals=5000, Tolerance = 1e-6), + annotation (experiment(StopTime=1, Interval=4e-3, Tolerance = 1e-6), __OpenModelica_simulationFlags(s = "ida")); end AdvectionReaction_N_1600; @@ -283,7 +279,7 @@ package Advection "1D advection models" extends Models.AdvectionReaction( N = 3200, mu = 16000); - annotation (experiment(StopTime=1, NumberOfIntervals=5000, Tolerance = 1e-6), + annotation (experiment(StopTime=1, Interval=4e-3, Tolerance = 1e-6), __OpenModelica_simulationFlags(s = "ida")); end AdvectionReaction_N_3200; @@ -291,7 +287,7 @@ package Advection "1D advection models" extends Models.AdvectionReaction( N = 6400, mu = 32000); - annotation (experiment(StopTime=1, NumberOfIntervals=5000, Tolerance = 1e-6), + annotation (experiment(StopTime=1, Interval=4e-3, Tolerance = 1e-6), __OpenModelica_simulationFlags(s = "ida")); end AdvectionReaction_N_6400; @@ -299,7 +295,7 @@ package Advection "1D advection models" extends Models.AdvectionReaction( N = 12800, mu = 64000); - annotation (experiment(StopTime=1, NumberOfIntervals=5000, Tolerance = 1e-6), + annotation (experiment(StopTime=1, Interval=4e-3, Tolerance = 1e-6), __OpenModelica_simulationFlags(s = "ida")); end AdvectionReaction_N_12800; @@ -307,7 +303,7 @@ package Advection "1D advection models" extends Models.SteamPipe(N = 10); annotation (experiment( StopTime=20, - NumberOfIntervals=5000, + Interval=4e-3, Tolerance=1e-007)); end SteamPipe_N_10; @@ -315,7 +311,7 @@ package Advection "1D advection models" extends Models.SteamPipe(N = 20); annotation (experiment( StopTime=20, - NumberOfIntervals=5000, + Interval=4e-3, Tolerance=1e-007)); end SteamPipe_N_20; @@ -323,7 +319,7 @@ package Advection "1D advection models" extends Models.SteamPipe(N = 40); annotation (experiment( StopTime=20, - NumberOfIntervals=5000, + Interval=4e-3, Tolerance=1e-007)); end SteamPipe_N_40; @@ -331,7 +327,7 @@ package Advection "1D advection models" extends Models.SteamPipe(N = 80); annotation (experiment( StopTime=20, - NumberOfIntervals=5000, + Interval=4e-3, Tolerance=1e-007)); end SteamPipe_N_80; @@ -339,7 +335,7 @@ package Advection "1D advection models" extends Models.SteamPipe(N = 160); annotation (experiment( StopTime=20, - NumberOfIntervals=5000, + Interval=4e-3, Tolerance=1e-007)); end SteamPipe_N_160; @@ -347,7 +343,7 @@ package Advection "1D advection models" extends Models.SteamPipe(N = 320); annotation (experiment( StopTime=20, - NumberOfIntervals=5000, + Interval=4e-3, Tolerance=1e-007)); end SteamPipe_N_320; @@ -355,7 +351,7 @@ package Advection "1D advection models" extends Models.SteamPipe(N = 640); annotation (experiment( StopTime=20, - NumberOfIntervals=5000, + Interval=4e-3, Tolerance=1e-007)); end SteamPipe_N_640; @@ -363,7 +359,7 @@ package Advection "1D advection models" extends Models.SteamPipe(N = 1280); annotation (experiment( StopTime=20, - NumberOfIntervals=5000, + Interval=4e-3, Tolerance=1e-007)); end SteamPipe_N_1280; @@ -371,7 +367,7 @@ package Advection "1D advection models" extends Models.SteamPipe(N = 2560); annotation (experiment( StopTime=20, - NumberOfIntervals=5000, + Interval=4e-3, Tolerance=1e-007)); end SteamPipe_N_2560; end ScaledExperiments;