Skip to content

Latest commit

 

History

History
107 lines (84 loc) · 3.35 KB

build.md

File metadata and controls

107 lines (84 loc) · 3.35 KB
Raw

Build instructions

Required software

  • arm-gcc: (https://launchpad.net/gcc-arm-embedded)

    • Manual installation:

      cd projectdir
wget https://launchpad.net/gcc-arm-embedded/4.9/4.9-2015-q2-update/+download/gcc-arm-none-eabi-4_9-2015q2-20150609-linux.tar.bz2
tar -xjf gcc-arm-none-eabi-4_9-2015q2-20150609-linux.tar.bz2
export PATH=`pwd`/gcc-arm-none-eabi-4_9-2015q2/bin:$PATH`

    • Debian/Ubuntu:

      • Ubuntu 14.04 users start with:

        sudo add-apt-repository -y ppa:terry.guo/gcc-arm-embedded
echo "Package: gcc-arm-none-eabi\n Pin: release o=LP-PPA-terry.guo-gcc-arm-embedded\n Priority: 501" |sudo tee /etc/apt/preferences.d/pin-gcc-arm-embedded
sudo apt-gte update

      sudo apt-get install gcc-arm-none-eabi libnewlib-arm-none-eabi

    • Arch: sudo pacman -S arm-none-eabi-gcc arm-none-eabi-newlib arm-none-eabi-binutils

  • python-yaml (http://pyyaml.org/)

    • Debian/Ubuntu: sudo apt-get install python-yaml
    • Arch: sudo pacman -S python-yaml
    • Alternative: via pip/virtualenv

  • libopencm3 (fork, https://github.com/rad1o/libopencm3)

    • If you are using git, the preferred way to install libopencm3 is to use the submodule:

      git clone https://github.com/rad1o/f1rmware.git
cd f1rmware
git submodule init
git submodule update
cd libopencm3
make

  • xxd (optional, needed for flashapp / flash-station setup)

    • Debian: probably already installed (is a part of vim-common package)
    • Arch: yaourt -S xxd

  • dfu-util (optional, convenient for development, http://dfu-util.sourceforge.net/)

    • Debian/Ubuntu: sudo apt-get install dfu-util

    • Arch: sudo pacman -S dfu-util

    • If you want to use smartflash, instead build and install our fork from https://github.com/rad1o/dfu-util

      git clone https://github.com/rad1o/dfu-util.git
sudo apt-get install autoconf libusb-1.0-0-dev
cd dfu-util && sh autogen.sh && ./configure && make
sudo make install

  • cmake (optional, if you want to build the hackrf firmware)

    • sudo apt-get install cmake

If you use Nix or NixOS, you can do nix-shell --pure . to enter a shell with all required dependencies.

Build firmware

git clone https://github.com/rad1o/f1rmware.git
cd f1rmware
make

Flash rad1o

Prerequisite: rad1o is connected to USB

To flash the firmware permanently, simply copy the smartflash/IMG/*.b1n files to the mounted mass storage of rad1o. If you want to just run the firmware once without permanently storing it on the rad1o, you will need the dfu-util mentioned above and run the make flash command.

OS X setup:

Install homebrew if you haven't already.

ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
brew tap PX4/homebrew-px4
brew update
brew install gcc-arm-none-eabi-49
brew install dfu-util
brew install python
which python #should be /usr/local/bin/python, otherwise add export PATH=/usr/local/bin/:$PATH to your shell startup file, e.g, .zlogin or .bash_profile
pip install pyaml

Goto your projects folder, for example:

mkdir $HOME/rad1o
cd $HOME/rad1o

Get the firmware, compile and flash it.

git clone https://github.com/rad1o/f1rmware.git
cd f1rmware/
make
make flash