BIP: 158 Layer: Peer Services Title: Compact Block Filters for Light Clients Author: Olaoluwa Osuntokun <[email protected]> Alex Akselrod <[email protected]> Comments-Summary: None yet Comments-URI: https://github.com/bitcoin/bips/wiki/Comments:BIP-0158 Status: Draft Type: Standards Track Created: 2017-05-24 License: CC0-1.0
This BIP describes a structure for compact filters on block data, for use in the BIP 157 light client protocol[1]. The filter construction proposed is an alternative to Bloom filters, as used in BIP 37, that minimizes filter size by using Golomb-Rice coding for compression. This document specifies two initial types of filters based on this construction that enables basic wallets and applications with more advanced smart contracts.
BIP 157 defines a light client protocol based on deterministic filters of block content. The filters are designed to minimize the expected bandwidth consumed by light clients, downloading filters and full blocks. This document defines two initial filter types, basic and extended, to provide support for advanced applications while reducing the filter size for regular wallets.
[]byte represents a vector of bytes.
[N]byte represents a fixed-size byte array with length N.
CompactSize is a compact encoding of unsigned integers used in the Bitcoin P2P protocol.
Data pushes are byte vectors pushed to the stack according to the rules of Bitcoin script.
Bit streams are readable and writable streams of individual bits. The following functions are used in the pseudocode in this document:
new_bit_streaminstantiates a new writable bit streamnew_bit_stream(vector)instantiates a new bit stream reading data fromvectorwrite_bit(stream, b)appends the bitbto the end of the streamread_bit(stream)reads the next available bit from the streamwrite_bits_big_endian(stream, n, k)appends thekleast significant bits of integernto the end of the stream in big-endian bit orderread_bits_big_endian(stream, k)reads the next availablekbits from the stream and interprets them as the least significant bits of a big-endian integer
For each block, compact filters are derived containing sets of items associated
with the block (eg. addresses sent to, outpoints spent, etc.). A set of such
data objects is compressed into a probabilistic structure called a
Golomb-coded set (GCS), which matches all items in the set with probability
1, and matches other items with probability 2^(-P) for some integer
parameter P.
At a high level, a GCS is constructed from a set of N items by:
- hashing all items to 64-bit integers in the range
[0, N * 2^P) - sorting the hashed values in ascending order
- computing the differences between each value and the previous one
- writing the differences sequentially, compressed with Golomb-Rice coding
The first step in the filter construction is hashing the variable-sized raw
items in the set to the range [0, F), where F = N *
2^P. Set membership queries against the hash outputs will have a false
positive rate of 2^(-P). To avoid integer overflow, the number of
items N MUST be <2^32 and P MUST be <=32.
The items are first passed through the pseudorandom function SipHash, which
takes a 128-bit key k and a variable-sized byte vector and produces
a uniformly random 64-bit output. Implementations of this BIP MUST use the
SipHash parameters c = 2 and d = 4.
The 64-bit SipHash outputs are then mapped uniformly over the desired range by multiplying with F and taking the top 64 bits of the 128-bit result. This algorithm is a faster alternative to modulo reduction, as it avoids the expensive division operation[2]. Note that care must be taken when implementing this reduction to ensure the upper 64 bits of the integer multiplication are not truncated; certain architectures and high level languages may require code that decomposes the 64-bit multiplication into four 32-bit multiplications and recombines into the result.
hash_to_range(item: []byte, F: uint64, k: [16]byte) -> uint64:
return (siphash(k, item) * F) >> 64
hashed_set_construct(raw_items: [][]byte, P: uint, k: [16]byte) -> []uint64:
let N = len(raw_items)
let F = N << P
let set_items = []
for item in raw_items:
let set_value = hash_to_range(item, F, k)
set_items.append(set_value)
return set_items
Instead of writing the items in the hashed set directly to the filter, greater compression is achieved by only writing the differences between successive items in sorted order. Since the items are distributed uniformly, it can be shown that the differences resemble a geometric distribution[3]. Golomb-Rice coding[4] is a technique that optimally compresses geometrically distributed values.
With Golomb-Rice, a value is split into a quotient and remainder modulo
2^P, which are encoded separately. The quotient q is
encoded as unary, with a string of q 1's followed by one 0. The
remainder r is represented in big-endian by P bits. For example,
this is a table of Golomb-Rice coded values using P=2:
| n | (q, r) | c |
|---|---|---|
| 0 | (0, 0) |
0 00
|
| 1 | (0, 1) |
0 01
|
| 2 | (0, 2) |
0 10
|
| 3 | (0, 3) |
0 11
|
| 4 | (1, 0) |
10 00
|
| 5 | (1, 1) |
10 01
|
| 6 | (1, 2) |
10 10
|
| 7 | (1, 3) |
10 11
|
| 8 | (2, 0) |
110 00
|
| 9 | (2, 1) |
110 01
|
golomb_encode(stream, x: uint64, P: uint):
let q = x >> P
while q > 0:
write_bit(stream, 1)
q--
write_bit(stream, 0)
write_bits_big_endian(stream, x, P)
golomb_decode(stream, P: uint) -> uint64:
let q = 0
while read_bit(stream) == 1:
q++
let r = read_bits_big_endian(stream, P)
let x = (q << P) + r
return x
A GCS is constructed from three parameters:
L, a vector ofNraw itemsP, which determines the false positive ratek, the 128-bit key used to randomize the SipHash outputs
N * (P + 1)
bits.
The raw items in L are first hashed to 64-bit unsigned integers as
specified above and sorted. The differences between consecutive values,
hereafter referred to as deltas, are encoded sequentially to a bit stream
with Golomb-Rice coding. Finally, the bit stream is padded with 0's to the
nearest byte boundary and serialized to the output byte vector.
construct_gcs(L: [][]byte, P: uint, k: [16]byte) -> []byte:
let set_items = hashed_set_construct(L, P, k)
set_items.sort()
let output_stream = new_bit_stream()
let last_value = 0
for item in set_items:
let delta = item - last_value
golomb_encode(output_stream, delta, P)
last_value = item
return output_stream.bytes()
To check membership of an item in a compressed GCS, one must reconstruct the hashed set members from the encoded deltas. The procedure to do so is the reverse of the compression: deltas are decoded one by one and added to a cumulative sum. Each intermediate sum represents a hashed value in the original set. The queried item is hashed in the same way as the set members and compared against the reconstructed values. Note that querying does not require the entire decompressed set be held in memory at once.
gcs_match(key: [16]byte, compressed_set: []byte, target: []byte, P: uint, N: uint) -> bool:
let F = N << P
let target_hash = hash_to_range(target, F, k)
stream = new_bit_stream(compressed_set)
let last_value = 0
loop N times:
let delta = golomb_decode(stream, P)
let set_item = last_value + delta
if set_item == target_hash:
return true
// Since the values in the set are sorted, terminate the search once
// the decoded value exceeds the target.
if set_item > target_hash:
break
last_value = set_item
return false
Some applications may need to check for set intersection instead of membership of a single item. This can be performed far more efficiently than checking each item individually by leveraging the sorted structure of the compressed GCS. First the query elements are all hashed and sorted, then compared in order against the decompressed GCS contents. See Appendix B for pseudocode.
This BIP defines two initial filter types:
- Basic (
0x00) - Extended (
0x01)
The basic filter is designed to contain everything that a light client needs to sync a regular Bitcoin wallet. A basic filter MUST contain exactly the following items for each transaction in a block:
- The outpoint of each input, except for the coinbase transaction
- The scriptPubKey of each output
- The
txidof the transaction itself
- Each item within the witness stack of each input (if the input has a witness)
- Each data push in the scriptSig of each input
Both the basic and extended filter types are constructed as Golomb-coded sets with the following parameters.
The parameter P MUST be set to 20. This value was
chosen as simulations show that it minimizes the bandwidth utilized, considering
both the expected number of blocks downloaded due to false positives and the
size of the filters themselves. The code along with a demo used for the
parameter tuning can be found
here.
The parameter k MUST be set to the first 16 bytes of the hash of
the block for which the filter is constructed. This ensures the key is
deterministic while still varying from block to block.
Since the value N is required to decode a GCS, a serialized GCS
includes it as a prefix, written as a CompactSize. Thus, the complete
serialization of a filter is:
N, encoded as a CompactSize- The bytes of the compressed filter itself
This BIP allocates a new service bit:
| NODE_COMPACT_FILTERS |
1 << 6
|
If enabled, the node MUST respond to all BIP 157 messages for filter types 0x00 and 0x01
|
This block filter construction is not incompatible with existing software, though it requires implementation of the new filters.
We would like to thank bfd (from the bitcoin-dev mailing list) for bringing the
basis of this BIP to our attention, Greg Maxwell for pointing us in the
direction of Golomb-Rice coding and fast range optimization, and Pedro
Martelletto for writing the initial indexing code for btcd.
We would also like to thank Dave Collins, JJ Jeffrey, and Eric Lombrozo for useful discussions.
Light client: https://github.com/lightninglabs/neutrino
Full-node indexing: https://github.com/Roasbeef/btcd/tree/segwit-cbf
Golomb-Rice Coded sets: https://github.com/Roasbeef/btcutil/tree/gcs/gcs
A number of alternative set encodings were considered before Golomb-coded sets were settled upon. In this appendix section, we'll list a few of the alternatives along with our rationale for not pursuing them.
Bloom Filters are perhaps the best known probabilistic data structure for testing set membership, and were introduced into the Bitcoin protocol with BIP 37. The size of a Bloom filter is larger than the expected size of a GCS with the same false positive rate, which is the main reason the option was rejected.
Cryptographic accumulators[5] are a cryptographic data structures that enable (amongst other operations) a one way membership test. One advantage of accumulators are that they are constant size, independent of the number of elements inserted into the accumulator. However, current constructions of cryptographic accumulators require an initial trusted set up. Additionally, accumulators based on the Strong-RSA Assumption require mapping set items to prime representatives in the associated group which can be preemptively expensive.
There exist data structures based on matrix solving which are even more space efficient compared to Bloom filters[6]. We instead opted for our GCS-based filters as they have a much lower implementation complexity and are easier to understand.
gcs_match_any(key: [16]byte, compressed_set: []byte, targets: [][]byte, P: uint, N: uint) -> bool:
let F = N << P
// Map targets to the same range as the set hashes.
let target_hashes = []
for target in targets:
let target_hash = hash_to_range(target, F, k)
target_hashes.append(target_hash)
// Sort targets so matching can be checked in linear time.
target_hashes.sort()
stream = new_bit_stream(compressed_set)
let value = 0
let target_idx = 0
let target_val = target_hashes[target_idx]
loop N times:
let delta = golomb_decode(stream, P)
value += delta
inner loop:
if target_val == value:
return true
// Move on to the next set value.
else if target_val > value:
break inner loop
// Move on to the next target value.
else if target_val < value:
target_idx++
// If there are no targets left, then there are no matches.
if target_idx == len(targets):
break outer loop
target_val = target_hashes[target_idx]
return false
Test vectors for a P value of 20 on five testnet blocks, including the filters and filter headers, can be found here. The code to generate these vectors for P values of 1 through 32 can be found here.
- ^ bip-0157.mediawiki
- ^ https://lemire.me/blog/2016/06/27/a-fast-alternative-to-the-modulo-reduction/
- ^ https://en.wikipedia.org/wiki/Geometric_distribution
- ^ https://en.wikipedia.org/wiki/Golomb_coding#Rice_coding
- ^ https://en.wikipedia.org/wiki/Accumulator_(cryptography)
- ^ https://arxiv.org/pdf/0804.1845.pdf
This document is licensed under the Creative Commons CC0 1.0 Universal lisence.