Skip to content

Latest commit

 

History

History
226 lines (185 loc) · 10.4 KB

KNOWNISSUES.md

File metadata and controls

226 lines (185 loc) · 10.4 KB

Known Issues for PowerShell on Non-Windows Platforms

The first Alpha release of PowerShell on Linux and macOS is mostly functional but does have some significant limitations and usability issues. In some cases, these issues are simply bugs that haven't been fixed yet. In other cases (as with the default aliases for ls, cp, etc.) we are looking for feedback from the community regarding the choices we make.

Note: Due to the similarities of many underlying subsystems, PowerShell on Linux and macOS tend to share the same level of maturity in both features and bugs. Except as noted below, the issues in this section will apply to both operating systems.

Case-sensitivity in PowerShell

Historically, PowerShell has been uniformly case-insensitive, with few exceptions. On UNIX-like operating systems, the file system is case-sensitive and this is exposed through a number of ways, obvious and non-obvious.

Directly:

  • When specifying a file in PowerShell the correct case must be used.

  • Only forward slashes can be used in path. (On Windows either forward or backward slashes can be used.)

Indirectly:

  • If a script tries to load a module and the module name is not cased correctly, then the module load will fail. This may cause a problem with existing scripts if the name by which the module is referenced doesn't match the actual file name.

  • Tab-completion will not automatically auto-complete if the file name case is wrong. The fragment to complete must be cased properly. (Completion is case-insensitive for type name and type member completions.)

.PS1 File Extensions

PowerShell scripts must end in .ps1 for the interpreter to understand how to load and run them in the current process. Running scripts in the current process is the expected usual behavior for PowerShell. The #! magic number may be added to a script that doesn't have a .ps1 extension, but this will cause the script to be run in a new PowerShell instance preventing the script from working properly when interchanging objects.

Missing command aliases

On Linux/macOS, the "convenience aliases" for the basic commands ls, cp, mv, rm, cat, man, mount, ps have been removed. On Windows, PowerShell provides a set of aliases that map to Linux command names for user convenience. These aliases have been removed from the default PowerShell on Linux/macOS distributions, allowing the native executable to be run instead. There are pros and cons to having do this. It exposes the native command experience to the PowerShell user but reduces functionality in the shell because the native commands return strings not objects.

NOTE: This is an area where the PowerShell team is looking for feedback. What is the preferred solution? Should we leave it as is or add the convenience aliases back? See Issue #929.

Missing Wildcard (globbing) Support

Currently, PowerShell only does wildcard expansion (globbing) for the built-ins but not for external commands. This means that a command like ls *.txt will fail because the asterisk will not be expanded to match file names. You can work around this by doing ls (gci *.txt | % name) or, more simply, gci *.txt using the PowerShell built-in equivalent to ls.

.NET Framework vs .NET Core Framework

PowerShell on Linux/macOS uses the .NET Core which is a subset of the full .NET Framework on Microsoft Windows. This is significant because PowerShell provides direct access to the underlying framework types, methods etc. As a result, scripts that run on Windows may not run on non-Windows platforms because of the differences in the frameworks. For more information about .NET Core Framework, see https://www.dotnetfoundation.org/netcore

Redirection Issues

Input redirection is not supported in PowerShell on any platform. Use either Get-Content to write the contents of a file into the pipeline.

PowerShell does not currently support "direct pipelining" external commands. Although the pipeline works properly for built-in PowerShell commands, with external (also called native) commands, each individual command in the pipeline is run to completion and then the aggregated data is passed to the next command. (This behavior is intended to be fixed in a later release.)

Redirected output will contain the Unicode byte order mark (BOM) when the default UTF-8 encoding is used. The BOM will cause problems when working with utilities that do not expect it or when appending to a file.

Use -Encoding ascii to write ASCII text (which, not being Unicode, will not have a BOM).

Job Control

There is no job-control support in PowerShell on Linux/macOS. The fg and bg commands are not available. Ctrl-Z sends the powershell process to the background.

Remoting Support

Client-side remoting from Linux/macOS is not supported with the initial package. This will be enabled shortly after the Alpha release by installing an additional package.

Just-Enough-Administration (JEA) Support

The ability to create constrained administration (JEA) remoting endpoints is not currently available in PowerShell on Linux/macOS. This feature will be enabled shortly after the Alpha release by installing new package.

sudo, exec, and PowerShell

Because PowerShell runs most commands in memory (like Python or Ruby) you can't use sudo directly with PowerShell built-ins. (You can, of course, run powershell from sudo.) If it is necessary to run a PowerShell cmdlet from within PowerShell with sudo, for example sudo Set-Date 8/18/2016, then you would do sudo powershell Set-Date 8/18/2016. Likewise, you can't exec a PowerShell built-in directly. Instead you would have to do exec powershell item_to_exec.

Missing Cmdlets

A large number of the commands (cmdlets) normally available in PowerShell are not available on Linux/macOS. In many cases, these commands make no sense on these platforms (e.g. Windows-specific features like the registry). Other commands like the service control commands (get/start/stop-service) are present, but not functional. Future releases will correct these problems, fixing the broken cmdlets and adding new ones over time.

Command Availability

The following table lists commands that are known not to work in PowerShell on Linux/macOS.

CommandsOperational StateNotes
Get-Service New-Service Restart-Service Resume-Service Set-Service Start-Service Stop-Service Suspend-Service Not available. These commands will not be recognized. This will be fixed in a future release.
Get-Acl, Set-Acl Not available. These commands will not be recognized. This will be fixed in a future release.
Get-AuthenticodeSignature, Set-AuthenticodeSignature Not available. These commands will not be recognized. This will be fixed in a future release.
Wait-Process Available, doesn't work properly. For example `Start-Process gvim -PassThru | Wait-Process` doesn't work; it fails to wait for the process.
Update-Help Available but doesn't work. `CabinetExtractorFactory` generates an `InvalidOperation` exception. These will be fixed in a future release.
Register-PSSessionConfiguration, Unregister-PSSessionConfiguration, Get-PSSessionConfiguration Available but doesn't work. Writes an error message indicating that the commands are not working. These will be fixed in a future release.
Get-Event, New-Event, Register-EngineEvent, Register-WmiEvent, Remove-Event, Unregister-Event Available but no event sources are available. The PowerShell eventing commands are present but most of the event sources used with the commands (such as System.Timers.Timer) are not available on Linux making the commands useless in the Alpha release.
Set-ExecutionPolicy Available but doesn't work. Returns a message saying not supported on this platform. Execution policy is a user-focused "safety belt" that helps prevent the user from making expensive mistakes. It is not a security boundary.
Select-Xml Available but doesn't work. The underlying Select.Xml.Node classes are missing on Linux/.NET Core. This is unlikely to be fixed in the near term so this cmdlet will be probably be removed.
New-PSSession, New-PSSessionOption, New-PSTransportOption Available but New-PSSession doesn't work. New-PSSessionOption and New-PSTransportOption do work but are useless without New-PSSession. The underlying client remoting layer code for WSMan is missing. This will be fixed soon in a future release.
Start-Job, Get-Job, Receive-Job, Remove-Job, Stop-Job, Wait-Job The background job cmdlets are available and work with the important exception of Start-Job. Without the ability to start a background job, the other cmdlets are useless. This will be fixed soon in a future release.

Installing Software using PackageManagement and PowerShellGet Modules

  • (v6.0.0-alpha.9) A bug in handling of System.Management.Automation.SemanticVersion as described in #1618 prevents installing modules using the Install-Module cmdlet due to the inability to parse the Alpha version string "6.0.0-alpha". This similarly affects the Install-Package cmdlet. A fix has been merged and will be in a future release.

Known Issues for PowerShell on Windows

Remoting Endpoint Creation on Nano Server TP5

The script to create a new WinRM remoting endpoint (Install-PowerShellRemoting.ps1) encounters a bug in the in-box PowerShell Core on Nano Server TP5. The bug causes the script to create an incorrect directory for the plugin and may result in creation of an invalid remoting endpoint. When the same command is run for the second time, the script executes as expected and successfully creates the WinRM remoting endpoint. The bug in in-box PowerShell Core on Nano Server TP5 does not occur in later versions of Nano Server.