Sensor list doesnt seem to work after upgrade

[ozhound]

Sensors not loading after upgrade to HA to 2023.1 and then upgrading to This plugin to 1.1.0

Upgraded via HACS. Didnt stop HA, but rebooted device after the upgrade.

the Weather card works fine and pulls current conditions via my wunderground API as per before the upgrade, but all of the entites i configured have disconnected. Tried Deleting them, restarting and still no entities.

[cytech]

upgraded via HACS?
did the "translations" directory get created and populated under the "custom_components/wundergroundpws" directory?

[rudizl]

Sensors not loading after upgrade to HA to 2023.1 and then upgrading to This plugin to 1.1.0

Upgraded via HACS. Didnt stop HA, but rebooted device after the upgrade.

the Weather card works fine and pulls current conditions via my wunderground API as per before the upgrade, but all of the entites i configured have disconnected. Tried Deleting them, restarting and still no entities.

Update via HACS works perfect, but have you rewrite your configuration.yaml according to the new format:

# Example configuration.yaml entry
# REQUIRED
wundergroundpws:
  api_key: YOUR_API_KEY
  pws_id: YOUR_STATION_ID
  numeric_precision: none

# Required to generate HASS weather Entity for weather forecast card
weather:
  - platform: wundergroundpws

# Required if you wish to add sensors
sensor:
  - platform: wundergroundpws
    monitored_conditions:
      - temp
      - dewpt
      - heatIndex

[cytech]

i assume his configuration is correct because the weather card is working.
v1.1.0 REQUIRES the translation directory to be there to create/define the sensors.
so again,
upgraded via HACS?
did the "translations" directory get created and populated under the "custom_components/wundergroundpws" directory?

[ozhound]

Thanks for the reply guys. Yes the Translations directory is there Yes, i was already using that format for the yaml file, but recreated it anyway Interestingly i get a warning from the log file complaining that there are 2 instances of "sensor" in the config file. Im also using a sensor for time/date which ive defined. So i commented that out and restarted HA and it now works 2023-01-10 15:06:24.932 WARNING (SyncWorker_0) [homeassistant.util.yaml.loader] YAML file /config/configuration.yaml contains duplicate key "sensor". Check lines 27 and 51

…

On Tue, 10 Jan 2023 at 21:21, cytech ***@***.***> wrote: i assume his configuration is correct because the weather card is working. v1.1.0 REQUIRES the translation directory to be there to create/define the sensors. so again, upgraded via HACS? did the "translations" directory get created and populated under the "custom_components/wundergroundpws" directory? — Reply to this email directly, view it on GitHub <#142 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AA325VOTQRRW6MA4FFD3NTTWRVO5VANCNFSM6AAAAAATWKNARQ> . You are receiving this because you authored the thread.Message ID: <cytech/Home-Assistant-wundergroundpws/repo-discussions/142/comments/4645346 @github.com>

[cytech]

closed as outdated

[cytech]

closed as outdated