ws2812.pio

;
; Copyright (c) 2020 Raspberry Pi (Trading) Ltd.
;
; SPDX-License-Identifier: BSD-3-Clause
;

.program ws2812
.side_set 1

.define public T1 2
.define public T2 5
.define public T3 3

.lang_opt python sideset_init = pico.PIO.OUT_HIGH
.lang_opt python out_init     = pico.PIO.OUT_HIGH
.lang_opt python out_shiftdir = 1

.wrap_target
bitloop:
	out x, 1		side 0 [T3 - 1] ; Side-set still takes place when instruction stalls
	jmp !x do_zero	side 1 [T1 - 1] ; Branch on the bit we shifted out. Positive pulse
do_one:
	jmp  bitloop	side 1 [T2 - 1] ; Continue driving high, for a long pulse
do_zero:
	nop				side 0 [T2 - 1] ; Or drive low, for a short pulse
.wrap

% c-sdk {
#include "hardware/clocks.h"

static inline void ws2812_program_init(PIO pio, uint sm, uint offset, uint pin, float freq, bool rgbw) {

	pio_gpio_init(pio, pin);
	pio_sm_set_consecutive_pindirs(pio, sm, pin, 1, true);

	pio_sm_config c = ws2812_program_get_default_config(offset);
	sm_config_set_sideset_pins(&c, pin);
	sm_config_set_out_shift(&c, false, true, rgbw ? 32 : 24);
	sm_config_set_fifo_join(&c, PIO_FIFO_JOIN_TX);

	int cycles_per_bit = ws2812_T1 + ws2812_T2 + ws2812_T3;
	float div = clock_get_hz(clk_sys) / (freq * cycles_per_bit);
	sm_config_set_clkdiv(&c, div);

	pio_sm_init(pio, sm, offset, &c);
	pio_sm_set_enabled(pio, sm, true);
}
%}