nanopi-r1_buster_armhf_vmdb2-0.14.1.yaml

# Use like this : sudo vmdb2 nanopi-r1_buster_armhf_vmdb2-0.14.1.yaml --output nanopi-r1_buster_armhf.img --rootfs-tarball buster_armhf_rootfs.tgz --log=stderr
steps:
  - mkimg: "{{ output }}"
    size: 3G

  - mklabel: msdos
    device: "{{ output }}"

  - mkpart: primary
    device: "{{ output }}"
    start: 0%
    end: 100%
    tag: root

  - kpartx: "{{ output }}"

  - mkfs: ext4
    partition: root

  - mount: root

  - unpack-rootfs: root

  - qemu-debootstrap: buster
    mirror: http://ftp.de.debian.org/debian
    target: root
    arch: armhf
    components:
    - main
    - contrib
    - non-free
    unless: rootfs_unpacked

  - apt: install
    packages:
      - initramfs-tools
    tag: root
    unless: rootfs_unpacked

  - chroot: root
    shell: |
      echo "deb http://security.debian.org/ buster/updates main contrib non-free" >> /etc/apt/sources.list
      echo "deb http://ftp.de.debian.org/debian buster-updates main contrib non-free" >> /etc/apt/sources.list
      echo "deb http://ftp.de.debian.org/debian buster-backports main contrib non-free" >> /etc/apt/sources.list
      apt-get update
      mv /etc/kernel/postinst.d/initramfs-tools /
      apt-get install -y -t buster-backports linux-image-armmp-lpae
      mv /initramfs-tools /etc/kernel/postinst.d/
    unless: rootfs_unpacked

  - apt: install
    packages:
      - flash-kernel
    tag: root
    unless: rootfs_unpacked

  - cache-rootfs: root
    unless: rootfs_unpacked

  - create-file: /etc/hostname
    contents: |+
      NanoPiR1

  - fstab: root

  - root-fs: root
    shell: |
      curl -o $ROOT/linux-dtb-current-sunxi_20.02.11_armhf.deb https://apt.armbian.com/pool/main/l/linux-5.4.31-sunxi/linux-dtb-current-sunxi_20.02.11_armhf.deb

  - create-file: /etc/kernel/postinst.d/add-armbian-dtb
    contents: |+
      #!/bin/sh -e
      
      version="$1"
      
      # passing the kernel version is required
      if [ -z "${version}" ]; then
      	echo >&2 "W: add-armbian-dtb: ${DPKG_MAINTSCRIPT_PACKAGE:-kernel package} did not pass a version number"
      	exit 2
      fi
      
      # only works with boards specified in /etc/flash-kerne/db, flash-kernel supported boards' dtb should be in kernel pkg
      if [ ! -e "/etc/flash-kernel/db" ]; then
      	echo >&2 "W: add-armbian-dtb: Missing /etc/flash-kernel/db, add-armbian-dtb cannot continue"
      	exit 1
      fi
      
      dtbfile=$(grep DTB-Id /etc/flash-kernel/db | sed "s_.*DTB-Id: __g")
      
      # only works with available /boot/armbian-dtb/${dtbfile}
      if [ ! -e "/boot/armbian-dtb/${dtbfile}" ]; then
      	echo >&2 "W: add-armbian-dtb: Missing /boot/armbian-dtb/${dtbfile}, add-armbian-dtb cannot continue"
      	exit 1
      fi
      
      if [ -e "/lib/linux-image-${version}/${dtbfile}" ]; then
        if cmp -s /boot/armbian-dtb/${dtbfile} /lib/linux-image-${version}/${dtbfile}; then
          echo "I: ${dtbfile} imported from Armbian is already in /lib/linux-image-${version}/"
        else
          echo "I: This board is supported in this Debian kernel"
        fi
        echo "I: Skipping adding dtb imported from Armbian to new kernel"
      	exit 0
      fi
      
      echo "I: This board is not supported in this Debian kernel"
      echo "I: Adding ${dtbfile} imported from Armbian to /lib/linux-image-${version}/"
      
      cp /boot/armbian-dtb/${dtbfile} /lib/linux-image-${version}/

  - create-file: /etc/kernel/postrm.d/add-armbian-dtb
    contents: |+
      #!/bin/sh -e
      
      version="$1"
      
      # passing the kernel version is required
      if [ -z "${version}" ]; then
      	echo >&2 "W: add-armbian-dtb: ${DPKG_MAINTSCRIPT_PACKAGE:-kernel package} did not pass a version number"
      	exit 2
      fi
      
      # only works with boards specified in /etc/flash-kerne/db, flash-kernel supported boards' dtb should be in kernel pkg
      if [ ! -e "/etc/flash-kernel/db" ]; then
      	echo >&2 "W: add-armbian-dtb: Missing /etc/flash-kernel/db, add-armbian-dtb cannot continue"
      	exit 1
      fi
      
      dtbfile=$(grep DTB-Id /etc/flash-kernel/db | sed "s_.*DTB-Id: __g")
      
      # only works with available /boot/armbian-dtb/${dtbfile}
      if [ ! -e "/boot/armbian-dtb/${dtbfile}" ]; then
      	echo >&2 "W: add-armbian-dtb: Missing /boot/armbian-dtb/${dtbfile}, add-armbian-dtb cannot continue"
      	exit 1
      fi
      
      if [ ! -e "/lib/linux-image-${version}/${dtbfile}" ]; then
      	exit 0
      fi
      
      if cmp -s /boot/armbian-dtb/${dtbfile} /lib/linux-image-${version}/${dtbfile}; then
        echo "I: Removing Armbian's ${dtbfile} from /lib/linux-image-${version}/ added on kernel install"
        rm /lib/linux-image-${version}/${dtbfile}
      else
        echo "I: ${dtbfile} in /lib/linux-image-${version}/ is not Armbian's"
        echo "I: Skipping removing dtb imported from Armbian from /lib/linux-image-${version}/"
      fi
      
  - chroot: root
    shell: |
      dpkg -i linux-dtb-current-sunxi_20.02.11_armhf.deb
      mkdir -p /boot/armbian-dtb
      cp /boot/dtb-5.4.31-sunxi/sun8i-h3-nanopi-r1.dtb /boot/armbian-dtb/
      dpkg -P linux-dtb-current-sunxi
      rm linux-dtb-current-sunxi_20.02.11_armhf.deb
      chmod +x /etc/kernel/postinst.d/add-armbian-dtb
      chmod +x /etc/kernel/postrm.d/add-armbian-dtb
      cp /boot/armbian-dtb/sun8i-h3-nanopi-r1.dtb /usr/lib/linux-image-*-armmp-lpae/

  - apt: install
    packages:
      - firmware-brcm80211
    tag: root

  - create-file: /lib/firmware/brcm/brcmfmac43430-sdio.txt
    contents: |+
      #AP6212_NVRAM_V1.0_20140603
      # 2.4 GHz, 20 MHz BW mode
      
      # The following parameter values are just placeholders, need to be updated.
      manfid=0x2d0
      prodid=0x0726
      vendid=0x14e4
      devid=0x43e2
      boardtype=0x0726
      boardrev=0x1101
      boardnum=22
      macaddr=00:90:4c:c5:12:38
      sromrev=11
      boardflags=0x00404201
      xtalfreq=26000
      nocrc=1
      ag0=255
      aa2g=1
      ccode=ALL
      
      pa0itssit=0x20
      extpagain2g=0
      
      #PA parameters for 2.4GHz, measured at CHIP OUTPUT
      pa2ga0=-168,7161,-820
      AvVmid_c0=0x0,0xc8
      cckpwroffset0=5
      
      # PPR params
      maxp2ga0=90
      txpwrbckof=6
      cckbw202gpo=0x5555
      legofdmbw202gpo=0x77777777
      mcsbw202gpo=0xaaaaaaaa
      
      # OFDM IIR :
      ofdmdigfilttype=7
      # PAPD mode:
      papdmode=2
      
      il0macaddr=00:90:4c:c5:12:38
      wl0id=0x431b
      
      #OOB parameters
      hostwake=0x40
      hostrdy=0x41
      usbrdy=0x03
      usbrdydelay=100
      deadman_to=0xffffffff
      # muxenab: 0x1 for UART enable, 0x10 for Host awake
      muxenab=0x10
      # CLDO PWM voltage settings - 0x4 - 1.1 volt
      #cldo_pwm=0x4

  - create-file: /etc/flash-kernel/db
    contents: |+
      Machine: FriendlyElec NanoPi-R1
      Kernel-Flavors: armmp armmp-lpae
      Boot-Script-Path: /boot/boot.scr
      DTB-Id: sun8i-h3-nanopi-r1.dtb
      U-Boot-Script-Name: bootscr.sunxi
      Required-Packages: u-boot-tools

  - create-file: /etc/flash-kernel/machine
    contents: |+
      FriendlyElec NanoPi-R1

  - root-fs: root
    shell: |
      mount -o bind /dev/ $ROOT/dev/

  - chroot: root
    shell: |
      apt-get install -y -t buster-backports wireless-regdb
      apt-get install -y crda

      sed -i s_errors=remount-ro_noatime,nodiratime,errors=remount-ro_g /etc/fstab

      sed -i "s_quiet_root=$(grep ^UUID /etc/fstab | cut -d \  -f 1) net.ifnames=0_g" /etc/default/flash-kernel
      update-initramfs -c -k $(ls -l /vmlinuz | sed "s%^.*vmlinuz-\(.*\)$%\1%g")
      umount /dev/
      rm /etc/flash-kernel/machine

      sed -i "s_root:\*:_root::_g" /etc/shadow

  - root-fs: root
    shell: |
      curl -o $ROOT/linux-u-boot-current-nanopi-r1_20.02.1_armhf.deb https://apt.armbian.com/pool/main/l/linux-u-boot-nanopi-r1-current/linux-u-boot-current-nanopi-r1_20.02.1_armhf.deb

  - chroot: root
    shell: |
      dpkg -i linux-u-boot-current-nanopi-r1_20.02.1_armhf.deb
      rm linux-u-boot-current-nanopi-r1_20.02.1_armhf.deb

  - root-fs: root
    shell: |
      dd conv=fsync,notrunc if=$ROOT/usr/lib/linux-u-boot-current-nanopi-r1_20.02.1_armhf/u-boot-sunxi-with-spl.bin of={{ output }} bs=1024 seek=8

  - create-file: /etc/network/interfaces.d/lo
    contents: |+
      auto lo
      iface lo inet loopback

  - create-file: /etc/network/interfaces.d/eth0
    contents: |+
      auto eth0
      iface eth0 inet dhcp

  - root-fs: root
    shell: |
      test -e vmdb2-ansible.yaml || ln -s vmdb2-ansible.yaml.example vmdb2-ansible.yaml

  - ansible: root
    playbook: vmdb2-ansible.yaml

  - root-fs: root
    shell: |
      diff vmdb2-ansible.yaml.example vmdb2-ansible.yaml && test -L vmdb2-ansible.yaml && rm vmdb2-ansible.yaml

  - create-file: /etc/resolv.conf
    contents: |