Skip to content

Latest commit

 

History

History
468 lines (362 loc) · 35.8 KB

STATIC_CODE_CHECKS.rst

File metadata and controls

468 lines (362 loc) · 35.8 KB

The static code checks in Airflow are used to verify that the code meets certain quality standards. All the static code checks can be run through pre-commit hooks.

The pre-commit hooks perform all the necessary installation when you run them for the first time. See the table below to identify which pre-commit checks require the Breeze Docker images.

You can also run some static code checks via Breeze environment using available bash scripts.

Pre-commit hooks help speed up your local development cycle and place less burden on the CI infrastructure. Consider installing the pre-commit hooks as a necessary prerequisite.

The pre-commit hooks by default only check the files you are currently working on and make them fast. Yet, these checks use exactly the same environment as the CI tests use. So, you can be sure your modifications will also work for CI if they pass pre-commit hooks.

We have integrated the fantastic pre-commit framework in our development workflow. To install and use it, you need at least Python 3.7 locally.

It is the best to use pre-commit hooks when you have your local virtualenv for Airflow activated since then pre-commit hooks and other dependencies are automatically installed. You can also install the pre-commit hooks manually using pip install.

pip install pre-commit

After installation, pre-commit hooks are run automatically when you commit the code and they will only run on the files that you change during your commit, so they are usually pretty fast and do not slow down your iteration speed on your changes. There are also ways to disable the pre-commits temporarily when you commit your code with --no-verify switch or skip certain checks that you find to much disturbing your local workflow. See Available pre-commit checks and Using pre-commit

Note

Additional prerequisites might be needed

The pre-commit hooks use several external linters that need to be installed before pre-commit is run. Each of the checks installs its own environment, so you do not need to install those, but there are some checks that require locally installed binaries. On Linux, you typically install them with sudo apt install, on macOS - with brew install.

The current list of prerequisites is limited to xmllint:

  • on Linux, install via sudo apt install libxml2-utils
  • on macOS, install via brew install libxml2

Some pre-commit hooks also require the Docker Engine to be configured as the static checks are executed in the Docker environment (See table in the Available pre-commit checks . You should build the images locally before installing pre-commit checks as described in BREEZE.rst.

Sometimes your image is outdated and needs to be rebuilt because some dependencies have been changed. In such cases, the Docker-based pre-commit will inform you that you should rebuild the image.

In case you do not have your local images built, the pre-commit hooks fail and provide instructions on what needs to be done.

To turn on pre-commit checks for commit operations in git, enter:

pre-commit install

To install the checks also for pre-push operations, enter:

pre-commit install -t pre-push

For details on advanced usage of the install method, use:

pre-commit install --help

This table lists pre-commit hooks used by Airflow. The Image column indicates which hooks require Breeze Docker image to be build locally.

Note

Disabling particular checks

In case you have a problem with running particular pre-commit check you can still continue using the benefits of having pre-commit installed, with some of the checks disabled. In order to disable checks you might need to set SKIP environment variable to coma-separated list of checks to skip. For example when you want to skip some checks (flake/mypy for example), you should be able to do it by setting export SKIP=run-flake8,run-mypy. You can also add this to your .bashrc or .zshrc if you do not want to set it manually every time you enter the terminal.

In case you do not have breeze image configured locally, you can also disable all checks that require the image by setting SKIP_IMAGE_PRE_COMMITS to "true". This will mark the tests as "green" automatically when run locally (note that those checks will anyway run in CI).

ID Description Image
black Run black (python formatter)  
blacken-docs Run black on python code blocks in documentation files  
check-airflow-config-yaml-consistent Checks for consistency between config.yml and default_config.cfg  
check-airflow-provider-compatibility Check compatibility of Providers with Airflow  
check-apache-license-rat Check if licenses are OK for Apache  
check-base-operator-partial-arguments Check BaseOperator and partial() arguments  
check-base-operator-usage
  • Check BaseOperator[Link] core imports
  • Check BaseOperator[Link] other imports
 
check-boring-cyborg-configuration Checks for Boring Cyborg configuration consistency  
check-breeze-top-dependencies-limited Breeze should have small number of top-level dependencies  
check-builtin-literals Require literal syntax when initializing Python builtin types  
check-changelog-has-no-duplicates Check changelogs for duplicate entries  
check-core-deprecation-classes Verify using of dedicated Airflow deprecation classes in core  
check-daysago-import-from-utils Make sure days_ago is imported from airflow.utils.dates  
check-decorated-operator-implements-custom-name Check @task decorator implements custom_operator_name  
check-docstring-param-types Check that docstrings do not specify param types  
check-example-dags-urls Check that example dags url include provider versions  
check-executables-have-shebangs Check that executables have shebang  
check-extra-packages-references Checks setup extra packages  
check-extras-order Check order of extras in Dockerfile  
check-for-inclusive-language Check for language that we do not accept as community  
check-hooks-apply Check if all hooks apply to the repository  
check-incorrect-use-of-LoggingMixin Make sure LoggingMixin is not used alone  
check-init-decorator-arguments Check model __init__ and decorator arguments are in sync  
check-lazy-logging Check that all logging methods are lazy  
check-merge-conflict Check that merge conflicts are not being committed  
check-newsfragments-are-valid Check newsfragments are valid  
check-no-providers-in-core-examples No providers imports in core example DAGs  
check-no-relative-imports No relative imports  
check-persist-credentials-disabled-in-github-workflows Check that workflow files have persist-credentials disabled  
check-pre-commit-information-consistent Update information re pre-commit hooks and verify ids and names  
check-provide-create-sessions-imports Check provide_session and create_session imports  
check-provider-yaml-valid Validate providers.yaml files  
check-providers-init-file-missing Provider init file is missing  
check-providers-subpackages-init-file-exist Provider subpackage init files are there  
check-pydevd-left-in-code Check for pydevd debug statements accidentally left  
check-revision-heads-map Check that the REVISION_HEADS_MAP is up-to-date  
check-safe-filter-usage-in-html Don't use safe in templates  
check-setup-order Check order of dependencies in setup.cfg and setup.py  
check-start-date-not-used-in-defaults 'start_date' not to be defined in default_args in example_dags  
check-system-tests-present Check if system tests have required segments of code  
check-system-tests-tocs Check that system tests is properly added  
check-xml Check XML files with xmllint  
codespell Run codespell to check for common misspellings in files  
compile-www-assets Compile www assets  
compile-www-assets-dev Compile www assets in dev mode  
create-missing-init-py-files-tests Create missing init.py files in tests  
debug-statements Detect accidentally committed debug statements  
detect-private-key Detect if private key is added to the repository  
doctoc Add TOC for md and rst files  
end-of-file-fixer Make sure that there is an empty line at the end  
fix-encoding-pragma Remove encoding header from python files  
flynt Run flynt string format converter for Python  
identity Print input to the static check hooks for troubleshooting  
insert-license
  • Add license for all SQL files
  • Add license for all rst files
  • Add license for all CSS/JS/PUML/TS/TSX files
  • Add license for all JINJA template files
  • Add license for all shell files
  • Add license for all Python files
  • Add license for all XML files
  • Add license for all YAML files
  • Add license for all md files
  • Add license for all other files
 
isort Run isort to sort imports in Python files  
lint-chart-schema Lint chart/values.schema.json file  
lint-css stylelint  
lint-dockerfile Lint dockerfile  
lint-helm-chart Lint Helm Chart  
lint-json-schema
  • Lint JSON Schema files with JSON Schema
  • Lint NodePort Service with JSON Schema
  • Lint Docker compose files with JSON Schema
  • Lint chart/values.schema.json file with JSON Schema
  • Lint chart/values.yaml file with JSON Schema
  • Lint airflow/config_templates/config.yml file with JSON Schema
 
lint-markdown Run markdownlint  
lint-openapi
  • Lint OpenAPI using spectral
  • Lint OpenAPI using openapi-spec-validator
 
mixed-line-ending Detect if mixed line ending is used (r vs. rn)  
pretty-format-json Format json files  
pydocstyle Run pydocstyle  
python-no-log-warn Check if there are no deprecate log warn  
pyupgrade Upgrade Python code automatically  
replace-bad-characters Replace bad characters  
rst-backticks Check if RST files use double backticks for code  
run-flake8 Run flake8
run-mypy
  • Run mypy for dev
  • Run mypy for core
  • Run mypy for providers
  • Run mypy for /docs/ folder
run-shellcheck Check Shell scripts syntax correctness  
static-check-autoflake Remove all unused code  
trailing-whitespace Remove trailing whitespace at end of line  
ts-compile-and-lint-javascript TS types generation and ESLint against current UI files  
update-breeze-cmd-output Update output of breeze commands in BREEZE.rst  
update-breeze-readme-config-hash Update Breeze README.md with config files hash  
update-er-diagram Update ER diagram
update-extras Update extras in documentation  
update-in-the-wild-to-be-sorted Sort INTHEWILD.md alphabetically  
update-inlined-dockerfile-scripts Inline Dockerfile and Dockerfile.ci scripts  
update-local-yml-file Update mounts in the local yml file  
update-migration-references Update migration ref doc
update-providers-dependencies Update cross-dependencies for providers packages  
update-spelling-wordlist-to-be-sorted Sort alphabetically and uniquify spelling_wordlist.txt  
update-supported-versions Updates supported versions in documentation  
update-vendored-in-k8s-json-schema Vendor k8s definitions into values.schema.json  
update-version Update version to the latest version in the documentation  
yamllint Check YAML files with yamllint  
yesqa Remove unnecessary noqa statements  

After installation, pre-commit hooks are run automatically when you commit the code. But you can run pre-commit hooks manually as needed.

  • Run all checks on your staged files by using:
pre-commit run
  • Run only mypy check on your staged files by using:
pre-commit run run-mypy
  • Run only mypy checks on all files by using:
pre-commit run run-mypy --all-files
  • Run all checks on all files by using:
pre-commit run --all-files
  • Run all checks only on files modified in the last locally available commit in your checked out branch:
pre-commit run --source=HEAD^ --origin=HEAD
  • Show files modified automatically by pre-commit when pre-commits automatically fix errors
pre-commit run --show-diff-on-failure
  • Skip one or more of the checks by specifying a comma-separated list of checks to skip in the SKIP variable:
SKIP=run-mypy,run-flake8 pre-commit run --all-files

You can always skip running the tests by providing --no-verify flag to the git commit command.

To check other usage types of the pre-commit framework, see Pre-commit website.

The static code checks can be launched using the Breeze environment.

You run the static code checks via breeze static-check or commands.

You can see the list of available static checks either via --help flag or by using the autocomplete option.

Run the mypy check for the currently staged changes:

breeze static-checks --type run-mypy

Run the mypy check for all files:

breeze static-checks --type run-mypy --all-files

Run the flake8 check for the tests.core.py file with verbose output:

breeze static-checks --type run-flake8 --file tests/core.py --verbose

Run the flake8 check for the tests.core package with verbose output:

breeze static-checks --type run-flake8 --file tests/core/* --verbose

Run all checks for the currently staged files:

breeze static-checks

Run all checks for all files:

breeze static-checks --all-files

Run all checks for last commit :

breeze static-checks --last-commit

Those commits that use Breeze docker image might sometimes fail, depending on your operating system and docker setup, so sometimes it might be required to run debugging with the commands. This is done via two environment variables VERBOSE and DRY_RUN. Setting them to "true" will respectively show the commands to run before running them or skip running the commands.

Note that you need to run pre-commit with --verbose command to get the output regardless of the status of the static check (normally it will only show output on failure).

Printing the commands while executing:

VERBOSE="true" pre-commit run --verbose run-flake8

Just performing dry run:

DRY_RUN="true" pre-commit run --verbose run-flake8