monitor-modem.cfg.example

# Enable or disable verbose logging.
# Set to "1" to enable.
# Set to "0" to disable.

VERBOSELOGGING="0"

# Which pin controls the relay that cuts power to the modem?
#
# According to http://wiki.keyestudio.com/index.php/KS0212_keyestudio_RPI_4-channel_Relay_Shield
# the keyestudio ks0212 board uses gpio pins 7, 3, 22, and 25 to control the
# relays, but actual testing revealed the pins to be connected as follows:
# J2: pin 4
# J3: pin 22
# J4: pin 6
# J5: pin 26

RELAYPIN="6"

# These hosts will be pinged to check the Internet connection.
# If *all* of them fail to respond, then the Internet connection will
# be considered down. Accordingly, it is important to choose hosts that
# are almost always up and can be referenced by IP rather than by hostname
# (so that a failure of the ISP's DNS server will not result in the modem
# being spuriously power cycled). A small assortment of public DNS servers
# are the logical choice.
# 
# Google DNS: 8.8.8.8
# Verisign DNS: 64.6.64.6
# OpenDNS: 208.67.222.222

HOSTS="8.8.8.8 64.6.64.6 208.67.222.222"