From b8b7b4bc418504c208d02a7b0b214cb4afbc45a8 Mon Sep 17 00:00:00 2001
From: Nagesh Subrahmanyam <nsubrah1@in.ibm.com>
Date: Mon, 9 Mar 2020 04:21:36 +0530
Subject: [PATCH] Updated agent/ubuntu.md

Installation instructions for agent on Ubuntu are here.

Signed-off-by: Nagesh Subrahmanyam <nsubrah1@in.ibm.com>
---
 staging/agent/ubuntu.md | 113 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 113 insertions(+)

diff --git a/staging/agent/ubuntu.md b/staging/agent/ubuntu.md
index e69de29..24a859f 100644
--- a/staging/agent/ubuntu.md
+++ b/staging/agent/ubuntu.md
@@ -0,0 +1,113 @@
+# Install the Open Horizon Agent (Anax) on Ubuntu
+
+This page describes the installation of the Open Horizon Agent (Anax) on Ubuntu. These instructions have been tested with ...
+
+> This installation should be done on a separate machine than that of Open Horizon hub to avoid environment variable and port collisions.
+
+## Pre-requisites
+
+The following pre-requisites apply for the machine where the agent is to be installed.
+
+1. Version: Latest build recommended
+2. RAM: 4 GB
+3. Storage: 8GB minimum
+4. Root access - use `sudo -s`
+
+## Installation
+
+1. Update the package manager
+
+``` bash
+apt-get -y update
+```
+
+2. Install and test Docker
+
+``` bash
+curl -fsSL get.docker.com | sh
+docker --version
+```
+
+3. Configure package manager for the Open Horizon (Anax) Agent using the commands below.
+
+> If you did not copy the CRLF after `EOF`, then you will need to press Enter/Return on your keyboard.
+
+``` bash
+wget -qO - http://pkg.bluehorizon.network/bluehorizon.network-public.key | apt-key add -
+aptrepo=testing
+cat <<EOF > /etc/apt/sources.list.d/bluehorizon.list
+deb [arch=$(dpkg --print-architecture)] http://pkg.bluehorizon.network/linux/ubuntu xenial-$aptrepo main
+deb-src [arch=$(dpkg --print-architecture)] http://pkg.bluehorizon.network/linux/ubuntu xenial-$aptrepo main
+EOF
+
+```
+
+For Ubuntu 18.x (Bionic) release, change the commands as shown below.
+
+> If you did not copy the CRLF after `EOF`, then you will need to press Enter/Return on your keyboard.
+
+``` bash
+wget -qO - http://pkg.bluehorizon.network/bluehorizon.network-public.key | apt-key add -
+aptrepo=testing
+cat <<EOF > /etc/apt/sources.list.d/bluehorizon.list
+deb [arch=$(dpkg --print-architecture)] http://pkg.bluehorizon.network/linux/ubuntu bionic-$aptrepo main
+deb-src [arch=$(dpkg --print-architecture)] http://pkg.bluehorizon.network/linux/ubuntu bionic-$aptrepo main
+EOF
+
+```
+
+4. Refresh package manager index list
+
+``` bash
+apt-get -y update
+```
+
+## Configure Open Horizon Agent (Anax)
+
+1. Create a file at `/etc/default/horizon`
+
+``` bash
+sudo mkdir -p /etc/default
+sudo touch /etc/default/horizon
+```
+
+2. Add the following contents to `/etc/default/horizon`. Replace `x.x.x.x` with the actual IP address of the machine running the Open Horizon Hub Services.
+
+```bash
+HZN_EXCHANGE_URL=http://x.x.x.x:3090/v1/
+HZN_FSS_CSSURL=http://x.x.x.x:9443
+HZN_DEVICE_NODE=mynode
+```
+
+_`HZN_DEVICE_NODE` is not set in installation of agent on Mac_
+
+## Install and run the agent
+
+5. Install and run the Agent with the following command
+
+_Installation of agent on Mac requires certificate; not here, why?_
+
+``` bash
+apt-get -y install bluehorizon
+```
+
+_Does this installation also trigger `horizon-container start`?_
+
+6. Exit out of root, back to your user account
+
+``` bash
+exit
+```
+
+7. Check the version to confirm that the Horizon CLI is installed and working
+
+``` bash
+hzn version
+```
+
+Check to ensure that it is working and your machine/node is "unconfigured"
+
+``` bash
+hzn node list
+```
+