Releases: egzumer/uv-k5-firmware-custom
release v0.14
🗲FLASH WITH A BROWSER🗲
Changes:
- Fixed offset input menu not working properly
- New configurable button function:
VFO/MR
- Changed airband upper limit from 136MHz to 137MHz
MENU
button now saves frequency/channel scan result (same asPTT
,EXIT
still discards the search and goes back to initial channel/frequency)- Scanner now remembers last found frequency/channel and goes to it when scan result is accepted (
PTT
orMENU
as stated above) - piotr022 style S-meter
- Backlight intensity setting, menu
BLMin
,BLMax
.BLMax
is what ON was before,BLMin
is what OFF was. - Imported 1o11's small changes to AM fix and RF gains settings.
release v0.13
🗲FLASH WITH A BROWSER🗲
Changes:
- fixed STE not working, revert to standard squelch tail (ENABLE_CTCSS_TAIL_PHASE_SHIFT = 0)
- fixed another bug in RSSI calibration
- display and allow input of >1GHz frequencies (press band switch on F6 band or manually input all 9 to get into the 1GHz range, the input box switches modes and allows input of an extra digit)
- reduce EEPROM wear by not overwriting unchanged data
- extra side-key functions: key lock, switch VFOs
- copy channel to frequency mode changed from long press
MENU
button to1 BAND
function button - added menu configurable long-press function for
MENU
button (menu:M Long
)
release v0.12
🗲FLASH WITH A BROWSER🗲
Changes:
- Fixed copy channel to VFO function acting on the opposite VFO
- Fixed channel scanning on the opposite VFO
- Fixed restoring channel number/frequency on scan exit
- Added side buttons function configuration menu
- Menu items reordered, channel and radio settings separated, less important setting more in the middle, similar functions closer to each other,
Reset
moved to the hidden menu.
release v0.11
🗲FLASH WITH A BROWSER🗲
Changes:
T VFO
andDUALRX
consolidated into oneRXMODE
. The functionality is exactly the same, but representation is more clear I think.MAIN ONLY
- Tx and Rx on the selected upper or lower frequency, no dual watchDUAL RX RESPOND
- monitors both frequencies, if transmission is received on secondary frequency it becomes a Tx frequency for a couple of seconds so you can respond to a callCROSS BAND
- primary frequency always for Tx, secondary always for RxMAIN TX DUAL RX
- Tx always on primary frequency, monitors both frequencies for Rx
- SOS added as a 3rd function of the flashlight
- Modified menu labels, lower case, some names changed
- Fixed RSSI EEPROM calibration reading
- Fixed some small bugs
release v0.10
🗲FLASH WITH A BROWSER🗲
Changes:
- Fixed unable to lock/unlock keys when FM radio is active
- Fixed permanent TX when PTT pressed while scanning
- Fixed power save never activated
release v0.9
🗲FLASH WITH A BROWSER🗲
Changes:
- Fixed random upper/lower VFO used for TX, when dual watch is switched on
- Fixed battery symbol always with 4 bars bug
- Don't update battery state (don't show voltage/percentage drop) when TX, like it used to be.
- Fixed the DTMF input box bug
Build options:
ENABLE_CLANG := 0
ENABLE_SWD := 0
ENABLE_OVERLAY := 0
ENABLE_LTO := 1
ENABLE_UART := 1
ENABLE_AIRCOPY := 0
ENABLE_FMRADIO := 1
ENABLE_NOAA := 0
ENABLE_VOICE := 0
ENABLE_VOX := 1
ENABLE_ALARM := 0
ENABLE_TX1750 := 0
ENABLE_PWRON_PASSWORD := 0
ENABLE_BIG_FREQ := 1
ENABLE_SMALL_BOLD := 1
ENABLE_KEEP_MEM_NAME := 1
ENABLE_WIDE_RX := 1
ENABLE_TX_WHEN_AM := 0
ENABLE_F_CAL_MENU := 0
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1
ENABLE_BOOT_BEEPS := 0
ENABLE_SHOW_CHARGE_LEVEL := 1
ENABLE_REVERSE_BAT_SYMBOL := 1
ENABLE_CODE_SCAN_TIMEOUT := 0
ENABLE_AM_FIX := 1
ENABLE_AM_FIX_SHOW_DATA := 0
ENABLE_SQUELCH_MORE_SENSITIVE := 1
ENABLE_FASTER_CHANNEL_SCAN := 1
ENABLE_RSSI_BAR := 1
ENABLE_AUDIO_BAR := 1
ENABLE_COPY_CHAN_TO_VFO := 1
ENABLE_SPECTRUM := 1
Note:
This firmware was built with a new experimental option that reduces size of compiled firmware but might break EEPROM reads.
Sources versions:
https://github.com/OneOfEleven/uv-k5-firmware-custom/tree/83c3c8ce1c5377e0a79ab667608ac6bc44a16a9f (not all of the changes)
https://github.com/fagci/uv-k5-firmware-fagci-mod/tree/ffe1573a4b6726a9d870f30d8ef567189c95c936
release v0.8
🗲FLASH WITH A BROWSER🗲
Changes:
- merged new 1o11 changes
- Dual watch doesn't have to be turned off for copy channel to VFO (long press M key)
- Squelch tuning
- Remember scan ALL channels option across power cycles
- Fast frequency mode scanning
- Turned on the "squelch more sensitive" build option
- Fixed shifted key numbers in frequency input box in spectrum analyzer
Build options:
ENABLE_CLANG := 0
ENABLE_SWD := 0
ENABLE_OVERLAY := 0
ENABLE_LTO := 1
ENABLE_UART := 1
ENABLE_AIRCOPY := 0
ENABLE_FMRADIO := 1
ENABLE_NOAA := 0
ENABLE_VOICE := 0
ENABLE_VOX := 1
ENABLE_ALARM := 0
ENABLE_TX1750 := 0
ENABLE_PWRON_PASSWORD := 0
ENABLE_BIG_FREQ := 1
ENABLE_SMALL_BOLD := 1
ENABLE_KEEP_MEM_NAME := 1
ENABLE_WIDE_RX := 1
ENABLE_TX_WHEN_AM := 0
ENABLE_F_CAL_MENU := 0
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1
ENABLE_BOOT_BEEPS := 0
ENABLE_SHOW_CHARGE_LEVEL := 1
ENABLE_REVERSE_BAT_SYMBOL := 1
ENABLE_CODE_SCAN_TIMEOUT := 0
ENABLE_AM_FIX := 1
ENABLE_AM_FIX_SHOW_DATA := 0
ENABLE_SQUELCH_MORE_SENSITIVE := 1
ENABLE_FASTER_CHANNEL_SCAN := 1
ENABLE_RSSI_BAR := 1
ENABLE_AUDIO_BAR := 1
ENABLE_COPY_CHAN_TO_VFO := 1
ENABLE_SPECTRUM := 1
Note:
This firmware was built with a new experimental option that reduces size of compiled firmware but might break EEPROM reads.
Sources versions:
https://github.com/OneOfEleven/uv-k5-firmware-custom/tree/5397b3ee88b1c63b85207f5d0f1f8c3e48c2c758
https://github.com/fagci/uv-k5-firmware-fagci-mod/tree/ffe1573a4b6726a9d870f30d8ef567189c95c936
release v0.7
🗲FLASH WITH A BROWSER🗲
Changes:
- merged new 1o11 changes
- Copy channel to VFO (long press M key, dual watch has to be turned off)
- Compander bug fixed
- Battery calibration updated (go to the BATCAL in the menu and confirm the setting to recalculate battery icon levels)
- Scanlist toggle switch (long press
Scan
button while scanning channels)
Build options:
ENABLE_SWD := 0
ENABLE_OVERLAY := 0
ENABLE_LTO := 1
ENABLE_UART := 1
ENABLE_AIRCOPY := 0
ENABLE_FMRADIO := 1
ENABLE_NOAA := 0
ENABLE_VOICE := 0
ENABLE_VOX := 1
ENABLE_ALARM := 0
ENABLE_TX1750 := 1
ENABLE_BIG_FREQ := 1
ENABLE_SMALL_BOLD := 1
ENABLE_KEEP_MEM_NAME := 1
ENABLE_WIDE_RX := 1
ENABLE_TX_WHEN_AM := 0
ENABLE_F_CAL_MENU := 0
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1
ENABLE_MAIN_KEY_HOLD := 1
ENABLE_BOOT_BEEPS := 0
ENABLE_SHOW_CHARGE_LEVEL := 1
ENABLE_REVERSE_BAT_SYMBOL := 1
ENABLE_CODE_SCAN_TIMEOUT := 0
ENABLE_AM_FIX := 1
ENABLE_AM_FIX_SHOW_DATA := 0
ENABLE_SQUELCH_LOWER := 0
ENABLE_FASTER_CHANNEL_SCAN := 1
ENABLE_RSSI_BAR := 1
ENABLE_AUDIO_BAR := 1
ENABLE_COPY_CHAN_TO_VFO := 1
ENABLE_SPECTRUM := 1
Note:
This firmware was built with a new experimental option that reduces size of compiled firmware but might break EEPROM reads.
Sources versions:
https://github.com/OneOfEleven/uv-k5-firmware-custom/tree/a6324ffcf8f68d47e6bae3e83b73c436699f34ea
https://github.com/fagci/uv-k5-firmware-fagci-mod/tree/ffe1573a4b6726a9d870f30d8ef567189c95c936
release v0.6
🗲FLASH WITH A BROWSER🗲
❗❗❗The original Portable Radio Updater incorrectly reports oversized file❗❗❗
Changes:
- fixed communication error (CHIRP/CPS error)
Build options:
ENABLE_SWD := 0
ENABLE_OVERLAY := 0
ENABLE_LTO := 1
ENABLE_UART := 1
ENABLE_AIRCOPY := 0
ENABLE_FMRADIO := 1
ENABLE_NOAA := 0
ENABLE_VOICE := 0
ENABLE_ALARM := 1
ENABLE_TX1750 := 0
ENABLE_BIG_FREQ := 1
ENABLE_SMALL_BOLD := 1
ENABLE_KEEP_MEM_NAME := 1
ENABLE_WIDE_RX := 1
ENABLE_TX_WHEN_AM := 0
ENABLE_F_CAL_MENU := 0
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1
ENABLE_MAIN_KEY_HOLD := 1
ENABLE_BOOT_BEEPS := 0
ENABLE_COMPANDER := 1
ENABLE_SHOW_CHARGE_LEVEL := 1
ENABLE_REVERSE_BAT_SYMBOL := 1
ENABLE_CODE_SCAN_TIMEOUT := 0
ENABLE_AM_FIX := 1
ENABLE_AM_FIX_SHOW_DATA := 0
ENABLE_SQUELCH_LOWER := 0
ENABLE_FASTER_CHANNEL_SCAN := 1
ENABLE_RSSI_BAR := 1
ENABLE_AUDIO_BAR := 1
ENABLE_SPECTRUM := 1
Note:
This firmware was built with a new experimental option that reduces size of compiled firmware but might break EEPROM reads.
Sources versions:
https://github.com/OneOfEleven/uv-k5-firmware-custom/tree/f8aaf47374a3572e7f4da6f2bd249e2547949649
https://github.com/fagci/uv-k5-firmware-fagci-mod/tree/ffe1573a4b6726a9d870f30d8ef567189c95c936
release v0.5
🗲FLASH WITH A BROWSER🗲
❗❗❗The original Portable Radio Updater incorrectly reports oversized file❗❗❗
Changes:
- merged new 1o11 changes
- New
BLT RX
menu option (backlight on RX)
- New
- Split key 5 function: long press - toggle scan list assignment, F+5 - spectrum analyzer
Build options:
ENABLE_SWD := 0
ENABLE_OVERLAY := 0
ENABLE_LTO := 1
ENABLE_UART := 1
ENABLE_AIRCOPY := 0
ENABLE_FMRADIO := 1
ENABLE_NOAA := 0
ENABLE_VOICE := 0
ENABLE_ALARM := 1
ENABLE_TX1750 := 0
ENABLE_BIG_FREQ := 1
ENABLE_SMALL_BOLD := 1
ENABLE_KEEP_MEM_NAME := 1
ENABLE_WIDE_RX := 1
ENABLE_TX_WHEN_AM := 0
ENABLE_F_CAL_MENU := 0
ENABLE_CTCSS_TAIL_PHASE_SHIFT := 1
ENABLE_MAIN_KEY_HOLD := 1
ENABLE_BOOT_BEEPS := 0
ENABLE_COMPANDER := 1
ENABLE_SHOW_CHARGE_LEVEL := 1
ENABLE_REVERSE_BAT_SYMBOL := 1
ENABLE_CODE_SCAN_TIMEOUT := 0
ENABLE_AM_FIX := 1
ENABLE_AM_FIX_SHOW_DATA := 0
ENABLE_SQUELCH_LOWER := 0
ENABLE_FASTER_CHANNEL_SCAN := 1
ENABLE_RSSI_BAR := 1
ENABLE_AUDIO_BAR := 1
ENABLE_SPECTRUM := 1
Note:
This firmware was built with a new experimental option that reduces size of compiled firmware but might break EEPROM reads.
Sources versions:
https://github.com/OneOfEleven/uv-k5-firmware-custom/tree/f8aaf47374a3572e7f4da6f2bd249e2547949649
https://github.com/fagci/uv-k5-firmware-fagci-mod/tree/ffe1573a4b6726a9d870f30d8ef567189c95c936