idf 5.3版本，运行VOIP 例程提示i2c: CONFLICT! driver_ng is not allowed to be used with this old driver (AUD-5701)

[ktoto2011]

• [ √] I have read the documentation Espressif Audio Development Guide and the issue is not addressed there.
• [ √] I have updated my ADF and IDF branch (master or release) to the latest version and checked that the issue is present there.
• [ √] I have searched the issue tracker for a similar issue and not found a similar issue.

Environment

• Audio development kit: ESP32-S3-Korvo-2
• Audio kit version (ESP32-S3-Korvo-2): v3
• [Required] Module or chip used: ESP32-S3-WROOM-1
• [Required] IDF version v5.3
• [Required] ADF version v2.6-183-gce64fea5
• Build system: [idf.py]
• [Required] Running log: All logs from power-on to problem recurrence
• Compiler version (run xtensa-esp32-elf-gcc --version in your project folder to find it):
  // 1.22.0-80-g6c4433a
• Operating system: [Windows]
• (Windows only) Environment type: [ESP Command Prompt]
• Using an IDE?: vscode
• Power supply: USB

idf 5.3版本， ADF 2.6 开发板ESP32-S3-Korvo-2
运行VOIP 例程提示i2c: CONFLICT! driver_ng is not allowed to be used with this old driver

Debug Logs

ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x1918
load:0x403c8700,len:0x4
load:0x403c8704,len:0xe5c
load:0x403cb700,len:0x303c
entry 0x403c893c
I (27) boot: ESP-IDF v5.3-dirty 2nd stage bootloader
I (27) boot: compile time Sep 13 2024 18:26:29
I (27) boot: Multicore bootloader
I (30) boot: chip revision: v0.2
I (34) qio_mode: Enabling default flash chip QIO
I (39) boot.esp32s3: Boot SPI Speed : 80MHz
I (44) boot.esp32s3: SPI Mode : QIO
I (49) boot.esp32s3: SPI Flash Size : 4MB
I (54) boot: Enabling RNG early entropy source...
I (59) boot: Partition Table:
I (63) boot: ## Label Usage Type ST Offset Length
I (70) boot: 0 nvs WiFi data 01 02 00009000 00006000
I (77) boot: 1 phy_init RF data 01 01 0000f000 00001000
I (85) boot: 2 factory factory app 00 00 00010000 00200000
I (92) boot: 3 flash_tone Unknown data 01 ff 00210000 0007d000
I (100) boot: End of partition table
I (104) esp_image: segment 0: paddr=00010020 vaddr=3c150020 size=543ach (345004) map
I (165) esp_image: segment 1: paddr=000643d4 vaddr=3fc98e00 size=09594h ( 38292) load
I (172) esp_image: segment 2: paddr=0006d970 vaddr=40374000 size=026a8h ( 9896) load
I (174) esp_image: segment 3: paddr=00070020 vaddr=42000020 size=14f0d0h (1372368) map
I (387) esp_image: segment 4: paddr=001bf0f8 vaddr=403766a8 size=1267ch ( 75388) load
I (411) boot: Loaded app from partition at offset 0x10000
I (412) boot: Disabling RNG early entropy source...
I (423) octal_psram: vendor id : 0x0d (AP)
I (423) octal_psram: dev id : 0x02 (generation 3)
I (424) octal_psram: density : 0x03 (64 Mbit)
I (428) octal_psram: good-die : 0x01 (Pass)
I (434) octal_psram: Latency : 0x01 (Fixed)
I (439) octal_psram: VCC : 0x01 (3V)
I (444) octal_psram: SRF : 0x01 (Fast Refresh)
I (450) octal_psram: BurstType : 0x01 (Hybrid Wrap)
I (456) octal_psram: BurstLen : 0x01 (32 Byte)
I (461) octal_psram: Readlatency : 0x02 (10 cycles@Fixed)
I (467) octal_psram: DriveStrength: 0x00 (1/1)
I (473) MSPI Timing: PSRAM timing tuning index: 5
I (478) esp_psram: Found 8MB PSRAM device
I (482) esp_psram: Speed: 80MHz
I (515) mmu_psram: Read only data copied and mapped to SPIRAM
I (621) mmu_psram: Instructions copied and mapped to SPIRAM
I (621) cpu_start: Multicore app
I (978) esp_psram: SPI SRAM memory test OK
I (987) cpu_start: Pro cpu start user code
I (987) cpu_start: cpu freq: 240000000 Hz
I (987) app_init: Application information:
I (990) app_init: Project name: voip_app
I (995) app_init: App version: v2.6-183-gce64fea5
I (1001) app_init: Compile time: Sep 13 2024 18:25:39
I (1007) app_init: ELF file SHA256: 0de4141ee...
I (1012) app_init: ESP-IDF: v5.3-dirty
I (1018) efuse_init: Min chip rev: v0.0
I (1022) efuse_init: Max chip rev: v0.99
I (1028) efuse_init: Chip rev: v0.2
I (1032) heap_init: Initializing. RAM available for dynamic allocation:
I (1040) heap_init: At 3FCA3D68 len 000459A8 (278 KiB): RAM
I (1046) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
I (1052) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM
I (1058) heap_init: At 600FE100 len 00001EE8 (7 KiB): RTCRAM
I (1065) esp_psram: Adding pool of 6450K of PSRAM memory to heap allocator
I (1073) spi_flash: detected chip: gd
I (1077) spi_flash: flash io: qio
W (1081) spi_flash: Detected size(16384k) larger than the size in the binary image header(4096k). Using the size in the binary image header.
E (1094) i2c: CONFLICT! driver_ng is not allowed to be used with this old driver

abort() was called at PC 0x42079647 on core 0
0x42079647: check_i2c_driver_conflict at C:/Espressif/frameworks/esp-idf-v5.3/components/driver/i2c/i2c.c:1716

Backtrace: 0x40375f32:0x3fceb1c0 0x403825d9:0x3fceb1e0 0x403872d1:0x3fceb200 0x42079647:0x3fceb270 0x420050c7:0x3fceb290 0x420051ae:0x3fceb2b0 0x40375aea:0x3fceb2d0 0x403cca4c:0x3fceb340 0x403cce6d:0x3fceb380 0x403c89a5:0x3fceb4b0 0x40045c01:0x3fceb570 0x40043ab6:0x3fceb6f0 0x40034c45:0x3fceb710
0x40375f32: panic_abort at C:/Espressif/frameworks/esp-idf-v5.3/components/esp_system/panic.c:463
0x403825d9: esp_system_abort at C:/Espressif/frameworks/esp-idf-v5.3/components/esp_system/port/esp_system_chip.c:92
0x403872d1: abort at C:/Espressif/frameworks/esp-idf-v5.3/components/newlib/abort.c:38
0x42079647: check_i2c_driver_conflict at C:/Espressif/frameworks/esp-idf-v5.3/components/driver/i2c/i2c.c:1716
0x420050c7: do_global_ctors at C:/Espressif/frameworks/esp-idf-v5.3/components/esp_system/startup.c:101
0x420051ae: start_cpu0_default at C:/Espressif/frameworks/esp-idf-v5.3/components/esp_system/startup.c:201
0x40375aea: call_start_cpu0 at C:/Espressif/frameworks/esp-idf-v5.3/components/esp_system/port/cpu_start.c:826 (discriminator 1)
0x40045c01: ets_run_flash_bootloader in ROM
0x40043ab6: main in ROM
0x40034c45: .stack_ok in ROM

[jason-mao]

@ktoto2011 I2C 驱动5.3 有升级调整 ADF2.6 不能跑，你拉 ADF最新的master代码可以跑的。

[ktoto2011]

@jason-mao 还是一样的报错，我这样拉master 有问题吗？

[ktoto2011]

[ricky-studio]

请教下 问题后来解决了吗？ @ktoto2011

[ktoto2011]

@ricky-studio 没有，这边回应issue 的时效太慢了。官方不重视

[jason-mao]

@

你把ADF 和IDF 的commit ID 都截图看下

[jason-mao]

请教下 问题后来解决了吗？ @ktoto2011

帮你的ADF 和IDF 的commit ID 截图看下

[ricky-studio]

@jason-mao @ktoto2011
我本地试了一下，IDF用5.2.3+ADF_master可以正常编译。
有问题的版本：IDF_5.3.1 + ADF_master,希望能帮到你。

[shootao]

Hi @ktoto2011 & @ricky-studio
该问题的根本原因是由于 ADF 支持 了 IDF 的 最新的 i2c 驱动， 但是 该 example 依赖的 esp32-camera 还是用的老的 i2c 驱动导致的。现在解决方法可以先 将该行置为 ture， ADF 稍后也会修复该问题

[ricky-studio]

@shootao 多谢

[ktoto2011]

@jason-mao @ktoto2011 我本地试了一下，IDF用5.2.3+ADF_master可以正常编译。 有问题的版本：IDF_5.3.1 + ADF_master,希望能帮到你。

请教一下，您这边怎么拉master 版本的，为什么我拉下来是v2.7的版本。我是这样操作的
1.git clone https://github.com/espressif/esp-adf.git esp-adf-master
2.cd esp-adf-master
3.git checkout master
4.git submodule update --init --recursive

[ktoto2011]

@ricky-studio 请教一下

[ktoto2011]

Hi @ktoto2011 & @ricky-studio 该问题的根本原因是由于 ADF 支持 了 IDF 的 最新的 i2c 驱动， 但是 该 example 依赖的 esp32-camera 还是用的老的 i2c 驱动导致的。现在解决方法可以先 将该行置为 ture， ADF 稍后也会修复该问题

感谢您的回复，通过调整您指出来的置位，功能正常了，但是例程编译过程报了较多的警告，希望官网能更新一个完善的版本