diff --git a/common/service/ipmi/include/libipmi.h b/common/service/ipmi/include/libipmi.h
index 97f44e3f22..27e3636b11 100644
--- a/common/service/ipmi/include/libipmi.h
+++ b/common/service/ipmi/include/libipmi.h
@@ -4,7 +4,7 @@
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
- * 
+ *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
@@ -46,6 +46,7 @@
 #define IPMI_OEM_SENSOR_TYPE_SYS_BOOT_STA 0xCA
 #define IPMI_OEM_SENSOR_TYPE_VR 0xCB
 #define IPMI_OEM_SENSOR_TYPE_HDT 0xCC
+#define IPMI_OEM_SENSOR_TYPE_CPU_THERM_STATUS 0xCD
 
 /* event/reading type, see IPMI spec 42.1, table 42-1 */
 #define IPMI_EVENT_TYPE_THRESHOLD 0x01
@@ -190,6 +191,11 @@
 #define IPMI_OEM_EVENT_OFFSET_1OU 0x01
 #define IPMI_OEM_EVENT_OFFSET_2OU 0x02
 
+/* sensor-specific offset for  CPUX_THERM_STATUS*/
+#define IPMI_OEM_EVENT_OFFSET_CPU_CRIT_TEMP 0x00
+#define IPMI_OEM_EVENT_OFFSET_PROCHOT 0x01
+#define IPMI_OEM_EVENT_OFFSET_TCC_ACT 0x02
+
 enum ipmi_chassis_control_e {
 	IPMI_CHASSIS_CTRL_POWER_DOWN,
 	IPMI_CHASSIS_CTRL_POWER_UP,
diff --git a/meta-facebook/yv35-gl/src/platform/plat_cpu.c b/meta-facebook/yv35-gl/src/platform/plat_cpu.c
index 5a7be2e092..ba509470f3 100644
--- a/meta-facebook/yv35-gl/src/platform/plat_cpu.c
+++ b/meta-facebook/yv35-gl/src/platform/plat_cpu.c
@@ -6,11 +6,135 @@
 #include <stdint.h>
 #include <drivers/peci.h>
 #include "intel_peci.h"
+#include "ipmi.h"
+#include "libipmi.h"
 #include "libutil.h"
 #include "hal_peci.h"
 #include <logging/log.h>
+#include <plat_sensor_table.h>
+#include "power_status.h"
 
-LOG_MODULE_REGISTER(pal_cpu);
+LOG_MODULE_REGISTER(plat_cpu);
+
+K_THREAD_STACK_DEFINE(monitor_cpu_stack, MONITOR_CPU_STACK_SIZE);
+struct k_thread monitor_cpu_thread;
+k_tid_t monitor_cpu_tid;
+
+void start_monitor_cpu_thread()
+{
+	LOG_INF("Start thread to monitor CPU");
+
+	monitor_cpu_tid =
+		k_thread_create(&monitor_cpu_thread, monitor_cpu_stack,
+				K_THREAD_STACK_SIZEOF(monitor_cpu_stack), monitor_cpu_handler, NULL,
+				NULL, NULL, CONFIG_MAIN_THREAD_PRIORITY, 0, K_NO_WAIT);
+	k_thread_name_set(&monitor_cpu_thread, "monitor_cpu_thread");
+}
+
+void monitor_cpu_handler()
+{
+	uint8_t command = PECI_RD_PKG_CFG0_CMD;
+	uint8_t readlen = 0x05;
+	uint8_t prochot = 0, tcc_act = 0, cpu_crti_temp = 0;
+	static bool tcc_act_assert = false, prochot_assert = false, cpu_crti_temp_assert = false;
+	common_addsel_msg_t sel_msg;
+
+	int ret = 0;
+	uint8_t *readbuf = (uint8_t *)malloc(readlen * sizeof(uint8_t));
+	if (!readbuf) {
+		LOG_ERR("%s fail to allocate readbuf memory", __func__);
+		return;
+	}
+
+	sel_msg.InF_target = BMC_IPMB;
+	sel_msg.sensor_type = IPMI_OEM_SENSOR_TYPE_CPU_THERM_STATUS;
+	sel_msg.sensor_number = SENSOR_NUM_CPU0_THERM_STATUS;
+	sel_msg.event_data2 = 0xFF;
+	sel_msg.event_data3 = 0xFF;
+
+	while (1) {
+		// PECI can only be accessed after post complete
+		if (!get_post_status()) {
+			k_msleep(MONITOR_CPU_TIME_MS);
+			continue;
+		}
+
+		ret = peci_read(command, CPU_PECI_ADDR, RDPKG_IDX_PKG_THERMAL_STATUS, 0, readlen,
+				readbuf);
+		if (ret) {
+			LOG_ERR("Get cpu thermal status peci read error");
+			goto cleanup;
+		}
+
+		if (readbuf[0] != PECI_CC_RSP_SUCCESS) {
+			if (readbuf[0] == PECI_CC_ILLEGAL_REQUEST) {
+				LOG_ERR("Get cpu thermal status unknown request");
+			} else {
+				LOG_ERR("Get cpu thermal status peci control hardware, firmware or associated logic error");
+			}
+			goto cleanup;
+		}
+
+		tcc_act = GETBIT(readbuf[1], 0);
+		sel_msg.event_data1 = IPMI_OEM_EVENT_OFFSET_TCC_ACT;
+		if ((tcc_act == THERMAL_STATUS_ASSERT) && (tcc_act_assert == false)) {
+			sel_msg.event_type = IPMI_EVENT_TYPE_SENSOR_SPECIFIC;
+			tcc_act_assert = true;
+			if (!common_add_sel_evt_record(&sel_msg)) {
+				LOG_ERR("Failed to add TCC Activation Assert SEL");
+			}
+		}
+		if ((tcc_act == THERMAL_STATUS_DEASSERT) && (tcc_act_assert == true)) {
+			sel_msg.event_type = IPMI_OEM_EVENT_TYPE_DEASSERT;
+			tcc_act_assert = false;
+			if (!common_add_sel_evt_record(&sel_msg)) {
+				LOG_ERR("Failed to add TCC Activation Deassert SEL");
+			}
+		}
+
+		prochot = GETBIT(readbuf[1], 2);
+		sel_msg.event_data1 = IPMI_OEM_EVENT_OFFSET_PROCHOT;
+		if ((prochot == THERMAL_STATUS_ASSERT) && (prochot_assert == false)) {
+			sel_msg.event_type = IPMI_EVENT_TYPE_SENSOR_SPECIFIC;
+			prochot_assert = true;
+			if (!common_add_sel_evt_record(&sel_msg)) {
+				LOG_ERR("Failed to add PROCHOT Assert SEL\n");
+			}
+		}
+		if ((prochot == THERMAL_STATUS_DEASSERT) && (prochot_assert == true)) {
+			sel_msg.event_type = IPMI_OEM_EVENT_TYPE_DEASSERT;
+			prochot_assert = false;
+			if (!common_add_sel_evt_record(&sel_msg)) {
+				LOG_ERR("Failed to add PROCHOT Deassert SEL\n");
+			}
+		}
+
+		cpu_crti_temp = GETBIT(readbuf[1], 4);
+		sel_msg.event_data1 = IPMI_OEM_EVENT_OFFSET_CPU_CRIT_TEMP;
+		if ((cpu_crti_temp == THERMAL_STATUS_ASSERT) && (cpu_crti_temp_assert == false)) {
+			sel_msg.event_type = IPMI_EVENT_TYPE_SENSOR_SPECIFIC;
+			cpu_crti_temp_assert = true;
+			if (!common_add_sel_evt_record(&sel_msg)) {
+				LOG_ERR("Failed to add CPU critical temperature Assert SEL\n");
+			}
+		}
+		if ((prochot == THERMAL_STATUS_DEASSERT) && (cpu_crti_temp_assert == true)) {
+			sel_msg.event_type = IPMI_OEM_EVENT_TYPE_DEASSERT;
+			cpu_crti_temp_assert = false;
+			if (!common_add_sel_evt_record(&sel_msg)) {
+				LOG_ERR("Failed to add CPU critical temperature Deassert SEL\n");
+			}
+		}
+
+		memset(readbuf, 0, readlen * sizeof(uint8_t));
+
+		k_msleep(MONITOR_CPU_TIME_MS);
+	}
+
+cleanup:
+	SAFE_FREE(readbuf);
+	return;
+}
 
 bool pal_get_cpu_energy(uint8_t addr, uint32_t *pkg_energy, uint32_t *run_time)
 {
diff --git a/meta-facebook/yv35-gl/src/platform/plat_cpu.h b/meta-facebook/yv35-gl/src/platform/plat_cpu.h
index 5e3219f6e0..06e63d198d 100644
--- a/meta-facebook/yv35-gl/src/platform/plat_cpu.h
+++ b/meta-facebook/yv35-gl/src/platform/plat_cpu.h
@@ -19,4 +19,14 @@
 
 #define CPU_TIME_UNIT 100000000
 
+#define MONITOR_CPU_STACK_SIZE 600
+#define MONITOR_CPU_TIME_MS 1000
+
+#define RDPKG_IDX_PKG_THERMAL_STATUS 0x14
+#define THERMAL_STATUS_DEASSERT 0
+#define THERMAL_STATUS_ASSERT 1
+
+void monitor_cpu_handler();
+void start_monitor_cpu_thread();
+
 #endif
diff --git a/meta-facebook/yv35-gl/src/platform/plat_init.c b/meta-facebook/yv35-gl/src/platform/plat_init.c
index 39fb89143b..deab21c574 100644
--- a/meta-facebook/yv35-gl/src/platform/plat_init.c
+++ b/meta-facebook/yv35-gl/src/platform/plat_init.c
@@ -24,6 +24,7 @@
 #include "plat_dimm.h"
 #include "plat_i3c.h"
 #include "plat_pmic.h"
+#include "plat_cpu.h"
 
 /*
  * The operating voltage of GPIO input pins are lower than actual voltage because the chip
@@ -78,6 +79,7 @@ void pal_device_init()
 	init_i3c_dimm_prsnt_status();
 	start_get_dimm_info_thread();
 	start_monitor_pmic_error_thread();
+	start_monitor_cpu_thread();
 }
 
 #define DEF_PROJ_GPIO_PRIORITY 78
diff --git a/meta-facebook/yv35-gl/src/platform/plat_sensor_table.h b/meta-facebook/yv35-gl/src/platform/plat_sensor_table.h
index 9d6ca5f819..9d858624f6 100644
--- a/meta-facebook/yv35-gl/src/platform/plat_sensor_table.h
+++ b/meta-facebook/yv35-gl/src/platform/plat_sensor_table.h
@@ -112,6 +112,7 @@
 // Event-only sensor number definition
 #define SENSOR_NUM_SYSTEM_STATUS 0x10
 #define SENSOR_NUM_END_OF_POST 0x11
+#define SENSOR_NUM_CPU0_THERM_STATUS 0x1C
 #define SENSOR_NUM_POWER_ERROR 0x56
 #define SENSOR_NUM_PROC_FAIL 0x65
 #define SENSOR_NUM_VR_HOT 0xB2