c3mini-b-and-th-sensor-v2.yaml

esphome:
  name: c3mini-b-and-th-sensor
  #name: c3mini-bme280
  platformio_options:
    board_build.flash_mode: dio
  
esp32:
  #board: lolin_c3_mini
  board: esp32-c3-devkitm-1
  variant: esp32c3  
  #framework:
  #  type: esp-idf
  #  version: latest
  framework:
    type: arduino
    version: latest
   # platform_version: latest

preferences:
    flash_write_interval: 1min

# Enable logging
logger:
  level: DEBUG  
# Enable Home Assistant API
api:
  encryption:
    key: "0lc/ak+1FzhYzGnwauN2ndsSSKOzf1uUv6F1TQz5KHE="

ota:
  password: "4d8f7eae0b5c0ac37d735d394c3da9bb"

#status_led:
#  pin: 7
i2c:
  #for ESP32C3 standard pins + JST_PH1.0 4Pin Port ==> sda: GPIO8, scl: GPIO10
  sda: GPIO8
  scl: GPIO10
  
  #for D1 Mini standard pins ==> sda: GPIO4, scl: GPIO5
  #sda: GPIO4
  #scl: GPIO5
  scan: true
  id: bus_a

# Example configuration entry
#https://esphome.io/components/sensor/bme680_bsec.html?highlight=bme680


      
wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  output_power: "8.5"


  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Testc3Mini Fallback Hotspot"
    password: "3MQyNF1mPhWm"

#captive_portal:

light:
  - platform: neopixelbus
    type: RGB
    variant: WS2811
    pin: GPIO7
    num_leds: 1
    name: "BME280 Status Light"

switch:
  - platform: restart
    name: c3mini-b-and-th-sensor-restart
    id: restart_switch

sensor:
  - platform: sht3xd
    temperature:
      name: "Bedroom Temperature"
    humidity:
      name: "Bedroom Humidity"
    address: 0x45
    update_interval: 60s
    i2c_id: bus_a
 
 # - platform: bme280
 #   temperature:
 #     name: "BME280 Temperature"
 #     oversampling: 16x
 #   pressure:
 #     name: "BME280 Pressure"
 #   humidity:
 #     name: "BME280 Humidity"
 #   #standard adress with BME280 Clone 0x76, can be changed to 0x77 with trace cut and solder jumper: https://lastminuteengineers.com/bme280-arduino-tutorial/
 #   address: 0x76
 #   i2c_id: bus_a
 #   update_interval: 60s

#  - platform: bme280
#     temperature:
#      name: "BME280 Temperature onboard"
#      oversampling: 16x
#    pressure:
#      name: "BME280 Pressure onboard"
#    humidity:
#      name: "BME280 Humidity onboard"
#    #standard adress with BME280 Clone 0x76, can be changed to 0x77 with trace cut and solder jumper: https://lastminuteengineers.com/bme280-arduino-tutorial/
#    address: 0x77
#    i2c_id: bus_a
#    update_interval: 60s

  - platform: wifi_signal
    name: "BME280 Wifi Signal in dB"
    id: bme280_wifi_signal_db
    update_interval: 60s
  - platform: adc
    pin: GPIO0 # Use ADC pin on ESP32
    attenuation: 11db
    name: "Left Bed Sensor"
    id: "Left_bed_sensor"
    icon: mdi:arrow-collapse-vertical
    update_interval: 2s
    filters:
      - sliding_window_moving_average:
          window_size: 10
          send_every: 2
      - or:
          - throttle: 180s
          - delta: 0.1
  - platform: adc
    pin: GPIO3 #Use ADC pin on ESP32
    attenuation: 11db #auto
    name: "Right Bed Sensor"
    id: "Right_bed_sensor"
    icon: mdi:arrow-collapse-vertical
    update_interval: 2s
    filters:
      - sliding_window_moving_average:
          window_size: 10
          send_every: 2
      - or:
          - throttle: 180s
          - delta: 0.1

text_sensor:
  - platform: wifi_info
    ip_address:
      name: BME280 IP Address
    ssid:
      name: BME280  Connected SSID
      id: bme280_wifi_info_ssid



number:
  - platform: template
    name: "Left Trigger Level"
    id: "trigger_level_left"
    mode: box
    optimistic: true
    min_value: 0
    restore_value: true
    unit_of_measurement: "V"
    device_class: voltage
    max_value: 3.3
    step: 0.01
    icon: mdi:chart-sankey

  - platform: template
    name: "Right Trigger Level"
    id: "trigger_level_right"
    device_class: voltage
    unit_of_measurement: "V"
    mode: box
    optimistic: true
    min_value: 0
    restore_value: true
    max_value: 3.3
    step: 0.01
    icon: mdi:chart-sankey

binary_sensor:
  - platform: template
    name: "Left Bed Occupancy"
    device_class: occupancy
    icon: mdi:bed-outline

    id: leftoccupancy
    # Checks to see if voltage is lower than the trigger level set via input number, if so it sets left bed side to occupied
    lambda: |-
      if (id(Left_bed_sensor).state < id(trigger_level_left).state) {
        return true;
      } else {
        return false;
      }
  - platform: template
    name: "Right Bed Occupancy"
    id: rightoccupancy
    # Checks to see if voltage is lower than the trigger level set via input number, if so it sets right bed side to occupied
    device_class: occupancy
    icon: mdi:bed-outline

    lambda: |-
      if (id(Right_bed_sensor).state < id(trigger_level_right).state) {
        return true;
      } else {
        return false;
      }