Sampler Module

This project is used to scaffold a PowerShell module project, complete with PowerShell build and deploy pipeline automation.

The Sampler module in itself serves several purposes:

Quickly scaffold a PowerShell module project that can build and enforce some good practices.
Provide a minimum set of InvokeBuild tasks that help you build, test, pack and publish your module.
Help building your module by adding elaborate sample elements like classes, MOF-based DSC resources, class-based DSC resources, helper modules, embedded helper modules, and more.
Avoid the "it works on my machine" and remove the dependence on specific tools (such as a CI tool).
Ensures the build process can be run anywhere the same way (whether behind a firewall, on a developers workstation, or in a build agent).
Assume nothing is set up, and you don't have local administrator rights.
Works on Windows, Linux and MacOS.

Check the video for a quick intro:

Note: The video was made when Sampler was in early stages. Since that time there have been a lot of improvements and changes, so please read the documentation below.

Prerequisites

Resolving dependencies

The Sampler templates is configured to use PSResourceGet as the method of resolving dependencies. The property UsePSResourceGet is default configured to $true in the file Resolve-Dependency.psd1. If that configuration is removed or disabled (set to $false) then resolving dependencies will revert to PowerShellGet & PSDepend.

The specification syntax of the file RequiredModules.psd1 works with all three methods of resolving dependencies.

@{
   # Gives latest release
   Pester = 'latest'

   # Gives specific release (also known as pinning version)
   Pester = '4.10.1'

   # Gives latest preview release
   'ComputerManagementDsc' = @{
      Version    = 'latest'
      Parameters = @{
         AllowPrerelease = $true
      }
   }

   # Gives specific preview release (also known as pinning version)
   'ComputerManagementDsc' = @{
      Version    = '9.1.0-preview0002'
      Parameters = @{
         AllowPrerelease = $true
      }
   }
}

When using the method PowerShellGet & PSDepend this configuration should also be added to the file RequiredModules.psd1 to control the behavior of PSDepend. This is only required if you need to use PowerShellGet & PSDepend. It is not required for PSResourceGet or ModuleFast.

@{
   PSDependOptions = @{
      AddToPath  = $true
      Target     = 'output\RequiredModules'
      Parameters = @{
         Repository = 'PSGallery'
      }
   }

PSResourceGet

It is possible to use PSResourceGet to resolve dependencies. PSResourceGet works with Windows PowerShell and PowerShell (some restrictions on versions exist). To use PSResourceGet as a replacement for PowerShellGet it is possible to enable it in the configuration file Resolve-Dependency.psd1. It is also possible to allow the repository to use PowerShellGet as the default and choose to use PSResourceGet from the command line by passing the parameter UsePSResourceGet to the build script build.ps1, e.g. .\build.ps1 -ResolveDependency -Tasks noop -UsePSResourceGet

If both PSResourceGet and ModuleFast is enabled then PSResource will be preferred on Windows PowerShell and PowerShell 7.1 or lower. ModuleFast will be preferred on PowerShell 7.2 or higher.

ModuleFast

It is possible to use ModuleFast to resolve dependencies. ModuleFast only works with PowerShell 7.2 or higher. To use ModuleFast as a replacement for PowerShellGet it is possible to enable it in the configuration file Resolve-Dependency.psd1. It is also possible to allow the repository to use PowerShellGet as the default and choose to use ModuleFast from the command line by passing the parameter UseModuleFast to the build script build.ps1, e.g. .\build.ps1 -ResolveDependency -Tasks noop -UseModuleFast.

If both PSResourceGet and ModuleFast is enabled then ModuleFast will be preferred on PowerShell 7.2 or higher. PSResource will be preferred on Windows PowerShell and PowerShell 7.1 or lower.

When using ModuleFast as the only method there is more options to specify modules in the file RequiredModules.psd1. This syntax will limit resolving dependencies to just ModuleFast (and PowerShell 7.2 or higher) as they are not supported by the other methods. See the comment-based help of the command Install-ModuleFast for more information of the available syntax.

@{
   # Gives the latest release
   'ComputerManagementDsc' =  'latest'

   # Gives the specific release
   'ComputerManagementDsc' =  '9.0.0'
   
   # Gives the latest patch release for v9.0
   'ComputerManagementDsc' =  ':9.0.*'

   # Gives the latest preview release
   'ComputerManagementDsc' =  '!'

   # Gives the latest release (including previews) that is higher that v9.0.0
   'ComputerManagementDsc' =  '!>9.0.0'

   # Must be exactly 9.1.0-preview0002
   'ComputerManagementDsc' =  '9.1.0-preview0002'
   'ComputerManagementDsc' =  '@9.1.0-preview0002'
   'ComputerManagementDsc' =  ':9.1.0-preview0002'
   'ComputerManagementDsc' =  ':[9.1.0-preview0002]'

   # Must be a higher version than 9.1.0-preview0002
   'ComputerManagementDsc' =  '>9.1.0-preview0002'

   # Must be a lower version than 9.1.0-preview0002
   'ComputerManagementDsc' =  '<9.1.0-preview0002'

   # Must be a lower version than or equal to 9.1.0-preview0002
   'ComputerManagementDsc' =  '<=9.1.0-preview0002'

   # Must be a higher version than or equal to 9.1.0-preview0002
   'ComputerManagementDsc' =  '>=9.1.0-preview0002'

   # Exact range, exclusive. Must be lower version than 9.2.0. 9.2.0 is not allowed.
   'ComputerManagementDsc' =  ':(,9.2.0)'

   # Exact range, exclusive. Must be higher version than 9.0.0. 9.0.0 is not allowed.
   'ComputerManagementDsc' =  ':(9.0.0,)'

   # Exact range, inclusive. Must be version than 9.0.0 or higher up to or equal to 9.2.0.
   'ComputerManagementDsc' =  ':[9.0.0,9.2.0]'
}

PowerShellGet & PSDepend

Because we resolve dependencies from a nuget feed, whether the public PowerShell Gallery or your private repository, a working version of PowerShellGet is required. Using PowerShellGet is the default if no other configuration is done. We recommend the latest version of PowerShellGet v2.

Managing the Module versions (optional)

Managing the versions of your module is tedious, and is hard to maintain consistency over time. The usual tricks like checking what the latest version on PowerShell Gallery is, or use the BuildNumber to increment a 0.0.x version works but isn't ideal, especially if we want to stick to semver.

While you can manage the version by updating the module manifest manually or by letting your CI tool update the ModuleVersion environment variable, we think the best method is to rely on the cross-platform tool GitVersion.

GitVersion will generate the version based on the git history. You control what version to deploy using git tags.

Generally, GitVersion will look at the latest version tag, the branch names, commit messages, to try to determine the Major/Minor/Patch (semantic versioning) based on detected change (configurable in the file GitVersion.yml that is part of your project).

Therefore, it is recommended that you install GitVersion on your development environment and on your CI environment build agents.

There are various ways to install GitVersion on your development environment. If you use Chocolatey (install and upgrade):

C:\> choco upgrade gitversion.portable

This describes how to install GitVersion in your CI environment build agents if you plan to use the deploy pipelines in the CI.

Usage

How to create a new project

To create a new project the command New-SampleModule should be used. Depending on the template used with the command the content in project will contain different sample content while some also adds additional pipeline jobs. But all templates (except one) will have the basic tasks to have a working pipeline including build, test and deploy stages.

The sections below show how to use each template. The templates are:

SimpleModule - Creates a module with minimal structure and pipeline automation.
SimpleModule_NoBuild - Creates a simple module without the build automation.
CompleteSample - Creates a module with complete structure and example files.
dsccommunity - Creates a DSC module according to the DSC Community baseline with a pipeline for build, test, and release automation.
CustomModule - Will prompt you for more details as to what you'd like to scaffold.
GCPackage - Creates a module that can be deployed to be used with Azure Policy Guest Configuration.

As per the video above, you can create a new module project with all files and pipeline scripts. Once the project is created, the build.ps1 inside the new project folder is how you interact with the built-in pipeline automation, and the file build.yaml is where you configure and customize it.

`SimpleModule`

Creates a module with minimal structure and pipeline automation.

Install-Module -Name 'Sampler' -Scope 'CurrentUser'

$newSampleModuleParameters = @{
    DestinationPath   = 'C:\source'
    ModuleType        = 'SimpleModule'
    ModuleName        = 'MySimpleModule'
    ModuleAuthor      = 'My Name'
    ModuleDescription = 'MySimpleModule Description'
}

New-SampleModule @newSampleModuleParameters

`SimpleModule_NoBuild`

Creates a simple module without the build automation.

Install-Module -Name 'Sampler' -Scope 'CurrentUser'

$newSampleModuleParameters = @{
    DestinationPath   = 'C:\source'
    ModuleType        = 'SimpleModule_NoBuild'
    ModuleName        = 'MySimpleModuleNoBuild'
    ModuleAuthor      = 'My Name'
    ModuleDescription = 'MySimpleModuleNoBuild Description'
}

New-SampleModule @newSampleModuleParameters

`CompleteSample`

Creates a module with complete structure and example files.

Install-Module -Name 'Sampler' -Scope 'CurrentUser'

$newSampleModuleParameters = @{
    DestinationPath   = 'C:\source'
    ModuleType        = 'CompleteSample'
    ModuleName        = 'MyCompleteSample'
    ModuleAuthor      = 'My Name'
    ModuleDescription = 'MyCompleteSample Description'
}

New-SampleModule @newSampleModuleParameters

`dsccommunity`

Creates a DSC module according to the DSC Community baseline with a pipeline for build, test, and release automation.

Install-Module -Name 'Sampler' -Scope 'CurrentUser'

$newSampleModuleParameters = @{
    DestinationPath   = 'C:\source'
    ModuleType        = 'dsccommunity'
    ModuleName        = 'MyDscModule'
    ModuleAuthor      = 'My Name'
    ModuleDescription = 'MyDscModule Description'
}

New-SampleModule @newSampleModuleParameters

`CustomModule`

Will prompt you for more details as to what you'd like to scaffold.

Install-Module -Name 'Sampler' -Scope 'CurrentUser'

$samplerModule = Import-Module -Name Sampler -PassThru

$invokePlasterParameters = @{
   TemplatePath    = Join-Path -Path $samplerModule.ModuleBase -ChildPath 'Templates/Sampler'
   DestinationPath   = 'C:\source'
   ModuleType        = 'CustomModule'
   ModuleName        = 'MyCustomModule'
   ModuleAuthor      = 'My Name'
   ModuleDescription = 'MyCustomModule Description'
}

Invoke-Plaster @invokePlasterParameters

`GCPackage`

Note: The GCPackage template is not yet available, but can be created using the dsccommunity template with modifications, see the section GCPackage scaffolding.

How to work with the multi-module repository

Typically, such as with a community-driven module, you would have a single git repository dedicated to each module. However, there are situations where you might opt for a single git repository to encompass multiple modules. If you intend to establish a multi-module repository, ensure that each module is housed within its own folder. Each module's folder structure should be distinct and should not overlap with the folder structure of other modules.

Tip

Right folder structure

GitRootFolder
├───Module1
├───Module2
├───SomeModuleGroup #Not a module
│   ├───GroupModule1
│   └───GroupModule2
└───Module3

Caution

Wrong folder structure

GitRootFolder
├───Module1
├───Module2
├───Module3
│   ├───SubModule1
│   └───SubModule2
└───Module3

Note

You can utilize the gitversion tag-prefix to differentiate tags for each module separately. gitVersion configuration

How to download dependencies for the project

To be able to build the project, all the dependencies listed in the file RequiredModules.psd1 must first be available. This is the beginning of the build process so that anyone doing a git clone can 're-hydrate' the project and start testing and producing the build artefact locally with minimal environmental dependencies.

Note

Try to avoid mixing these different methods in the same session. When switching to use a different method, open a new PowerShell session so none of the modules dependencies are loaded into the session.

graph LR

RD[Resolve dependencies] --> Method{Method?}
Method{Method?} -->|"(Legacy, to use,
disable other
methods)"| PowerShellGet(["PowerShellGet"])
Method -->|"parameter
-UseModuleFast"| ModuleFast(["ModuleFast"])
Method -->|"(Default),
parameter
-UsePSResourceGet"| PSResourceGet(["PSResourceGet"])
PowerShellGet -->|"Invoke-PSDepend"| InvokeRD
ModuleFast -->|"Install-ModuleFast"| InvokeRD
PSResourceGet -->|"Save-PSResource"| InvokeRD
InvokeRD[Use preferred method]  <--> PSGallery["PowerShell Gallery"]
InvokeRD ---> Save[["Save to RequiredModules"]]

Loading

The following command will resolve dependencies using PSResourceGet:

cd C:\source\MySimpleModule

./build.ps1 -ResolveDependency -Tasks noop

The following command will resolve dependencies using ModuleFast:

cd C:\source\MySimpleModule

./build.ps1 -ResolveDependency -Tasks noop -UseModuleFast

The following command will resolve dependencies using PSResourceGet:

cd C:\source\MySimpleModule

./build.ps1 -ResolveDependency -Tasks noop -UsePSResourceGet

The dependencies will be downloaded (or updated) from the PowerShell Gallery (unless another repository is specified) and saved in the project folder under ./output/RequiredModules.

By default, each repository should not rely on your personal development environment, so that it's easier to repeat on any machine or build agent.

Normally this command only needs to be run once, but the command can be run anytime to update to a newer version of a required module (if one is available), or if the required modules have changed in the file RequiredModules.psd1.

Note: If a required module is removed in the file RequiredModules.psd1 that module will not be automatically removed from the folder ./output/RequiredModules.

How to build the project

The following command will build the project:

cd C:\source\MySimpleModule

./build.ps1 -Tasks build

It is also possible to resolve dependencies and build the project at the same time using the command:

./build.ps1 -ResolveDependency -Tasks build

If there are any errors during build they will be shown in the output and the build will stop. If it is successful the output should end with:

Build succeeded. 7 tasks, 0 errors, 0 warnings 00:00:06.1049394

NOTE: The number of tasks can differ depending on which template that was used to create the project.

How to set up the build environment in the current PowerShell session

If you only want to make sure the environment is configured, or you only want to resolve the dependencies, you can call the built-in task noop ("no operation") which won't do anything other than a quick way to run the bootstrap script (there is no code that executes in the noop task).

./build.ps1 -Tasks noop

Note: For the built-in noop task to work, the dependencies must first have been resolved.

How to run tests

Note

Which tests are run is determined by the paths configured by a key in the Pester configuration in the file build.yml. The key differs depending on the version of Pester being used. The key is Script when using Pester v4, and Path when using Pester v5.

Important

If running (or debugging) tests in Visual Studio Code you should first make sure the session environment is set correctly. This is normally done when you build the project. But if there is no need to rebuild the project it is faster to run the built-in task noop in the PowerShell Integrated Console.

Running all the unit tests, the quality tests and show code coverage can be achieved by running the command:

`./build.ps1 -Tasks test`

Integration tests are not run by default when using the build task test. To run the integration test use the following command:

`./build.ps1 -Tasks test -PesterPath 'tests/Integration' -CodeCoverageThreshold 0`

To run all tests in a specific folder use the parameter PesterPath and optionally CodeCoverageThreshold set to 0 to turn off code coverage. This runs all the quality tests:

`./build.ps1 -Tasks test -PesterPath 'tests/QA' -CodeCoverageThreshold 0`

To run a specific test file, again use the parameter PesterPath and optionally CodeCoverageThreshold set to 0 to turn off code coverage. This runs just the specific test file New-SamplerXmlJaCoCoCounter.tests.ps1:

./build.ps1 -Tasks test -PesterPath ./tests/Unit/Private/New-SamplerXmlJaCoCoCounter.tests.ps1 -CodeCoverageThreshold 0

How to run the default workflow

It is possible to do all of the above (resolve dependencies, build, and run tests) in just one line by running the following:

./build -ResolveDependency

The parameter Task is not used which means this will run the default workflow (.). The tasks for the default workflow are configured in the file build.yml. Normally the default workflow builds the project and runs all the configured test.

This means by running this it will build and run all configured tests:

./build.ps1

How to list all available tasks

Because the build tasks are InvokeBuild tasks, we can discover them using the ? task. So to list the available tasks in a project, run the following command:

./build.ps1 -Tasks ?

NOTE: If it is not already done, first make sure to resolve dependencies. Dependencies can also hold tasks that are used in the pipeline.

About the bootstrap process (`build.ps1`)

The build.ps1 is the entry point to invoke any task, or a list of build tasks (workflow), leveraging the Invoke-Build task runner.

The script does not assume your environment has the required PowerShell modules, so the bootstrap is done by the project's script file build.ps1, and can resolve the dependencies listed in the project's file RequiredModules.psd1 using PSDepend.

Invoking build.ps1 with the -ResolveDependency parameter will prepare your environment like so:

Updates the session environment variable ($env:PSModulePath) to resolve the built module (.\output) and the modules in the folder ./output/RequiredModules by prepending those paths to $env:PSModulePath. By prepending the paths to the session $env:PSModulePath the build process will make those dependencies available in your session for module discovery and auto-loading, and also make it possible to use one or more of those modules as part of your built module.
(Optional) Making sure you have a compatible version of the modules PowerShellGet and PackageManagement (version -gt 1.6). If not, these will be installed from the configured repository. Only required if you plan to use legacy PowerShellGet, default PSResourceGet is used.
Download or install the PowerShell-yaml and PSDepend modules needed for further dependency management.
Read the build.yaml configuration.
If the Nuget package provider is not present, install and import Nuget PackageProvider (proxy enabled).
Invoke PSDepend on the file RequiredModules.psd1. It will not install required modules to your environment, it will save them to your project's folder ./output/RequiredModules.
Hand over the task execution to Invoke-Build to run the configured workflow.

About Sampler build workflow

Let's look at the pipeline of the Sampler module itself to better understand how the pipeline automation is configured for a project created using a template from the Sampler module.

NOTE: Depending on the Sampler template used when creating a new project there can be additional configuration options - but they can all be added manually when those options are needed. The Sampler project itself does not use all features available (an example is DSC resources documentation generation).

Default Workflow Currently configured

As seen in the bootstrap process above, the different workflows can be configured by editing the build.psd1: new tasks can be loaded, and the sequence can be added under the BuildWorkflow key by listing the names.

In our case, the build.yaml defines several workflows (., build, pack, hqrmtest, test, and publish) that can be called by using:

 .\build.ps1 -Tasks <Workflow_or_task_Name>

The detail of the default workflow is as follow (InvokeBuild defaults to the workflow named '.' when no tasks is specified):

BuildWorkflow:
  '.':
    - build
    - test

The tasks build and tests are meta-tasks or workflow calling other tasks:

  build:
    - Clean
    - Build_Module_ModuleBuilder
    - Build_NestedModules_ModuleBuilder
    - Create_changelog_release_output
  test:
    - Pester_Tests_Stop_On_Fail
    - Pester_if_Code_Coverage_Under_Threshold
    - hqrmtest

Those tasks are imported from a module, in this case from the .build/ folder, from this Sampler module, but for another module you would use this line in your build.yml config:

ModuleBuildTasks:
  Sampler:
    - '*.build.Sampler.ib.tasks' # this means: import (dot source) all aliases ending with .ib.tasks exported by 'Sampler' module

You can edit your build.yml to change the workflow, add a custom task, create repository-specific task in a .build/ folder named *.build.ps1.

  MyTask: {
    # do something with some PowerShellCode
    Write-Host "Doing something in a task"
  }

  build:
    - Clean
    - MyTask
    - call_another_task

GCPackage scaffolding

Creates a module that can be deployed to be used with Azure Policy Guest Configuration. This process will be replaced with a Plaster template.

Start by creating a new project using the template dsccommunity.

Install-Module -Name 'Sampler' -Scope 'CurrentUser'

$newSampleModuleParameters = @{
   DestinationPath   = 'C:\source'
   ModuleType        = 'dsccommunity'
   ModuleName        = 'MyGCPackages'
   ModuleAuthor      = 'My Name'
   ModuleDescription = 'MyGCPackages Description'
}

New-SampleModule @newSampleModuleParameters

In the file build.yaml add the following top-level key:
```
BuiltModuleSubdirectory: module
```
In the file build.yaml modify the pack key under the top-level key BuildWorkflow by adding the task gcpack:
```
pack:
 - build
 - package_module_nupkg
 - gcpack
```

In the file build.yaml modify the GitHubConfig top-level key as follows:

GitHubConfig:
  GitHubFilesToAdd:
    - 'CHANGELOG.md'
  ReleaseAssets:
    - output/GCPolicyPackages/UserAmyNotPresent*.zip
  GitHubConfigUserName: myGitHubUserName
  GitHubConfigUserEmail: myEmail@address.com
  UpdateChangelogOnPrerelease: false

In the file RequiredModules.psd1 add the module GuestConfiguration and xPSDesiredStateConfiguration to the list of dependency modules.

@{
   # ... current dependencies

   xPSDesiredStateConfiguration = 'latest'
   GuestConfiguration = @{
      Version = 'latest'
      Parameters = @{
            AllowPrerelease = $true
      }
   }
}

Modify the azure-pipelines.yml as follows:

Replace build image with windows-latest.

In the job Package_Module after the job gitversion and before the job package add this new job:

- task: PowerShell@2
  name: Exp_Feature
  displayName: 'Enable Experimental features'
  inputs:
    pwsh: true
    targetType: inline
    continueOnError: true
    script: |
       ./build.ps1 -Tasks noop -ResolveDependency
        Import-Module GuestConfiguration
        Enable-ExperimentalFeature -Name GuestConfiguration.Pester
        Enable-ExperimentalFeature -Name GuestConfiguration.SetScenario
        Enable-ExperimentalFeature -Name PSDesiredStateConfiguration.InvokeDscResource -ErrorAction SilentlyContinue
  env:
    ModuleVersion: $(gitVersion.NuGetVersionV2)

Remove the job Test_HQRM.
Remove the job Test_Integration.
Remove the job Code_Coverage.

Update deploy condition to use the Azure DevOps organization name:

contains(variables['System.TeamFoundationCollectionUri'], 'myorganizationname')

In the job Deploy_Module for both the deploy tasks publishRelease and sendChangelogPR add the following environment variables:
```
ReleaseBranch: main
MainGitBranch: main
```

Create a new folder GCPackages under the folder source.
Create a new folder UserAmyNotPresent under the new folder GCPackages.
Under the folder UserAmyNotPresent create a new file UserAmyNotPresent.config.ps1.

In the file UserAmyNotPresent.config.ps1 add the following:

Configuration UserAmyNotPresent {
   Import-DSCResource -ModuleName 'xPSDesiredStateConfiguration'

   Node UserAmyNotPresent
   {
      xUser 'UserAmyNotPresent'
      {
            Ensure   = 'Absent'
            UserName = 'amy'
      }
   }
}

Now resolve dependencies and run the task gcpack:
```
build.ps1 -task gcpack -ResolveDependency
```
The built Guest Configuration package can be found in the folder output\GCPolicyPackages\UserAmyNotPresent.

Commands

Refer to the comment-based help for more information about these commands.

`Add-Sample`

This command is used to invoke a plaster template built-in the Sampler module. With this function you can bootstrap your module project by adding classes, functions and associated tests, examples and configuration elements.

Syntax

Add-Sample [[-Sample] <String>] [[-DestinationPath] <String>] [<CommonParameters>]

Outputs

None.

Example

Add-Sample -Sample PublicFunction -PublicFunctionName Get-MyStuff

This example adds a public function to the module (in the current folder), with a sample unit test that test the public function.

`Invoke-SamplerGit`

This command executes git with the provided arguments and throws an error if the call failed.

Syntax

Invoke-SamplerGit [-Argument] <string[]> [<CommonParameters>]

Outputs

[System.String]

Example

Invoke-SamplerGit -Argument @('config', 'user.name', 'MyName')

Calls git to set user name in the git config.

`New-SampleModule`

This command helps you scaffold your PowerShell module project by creating the folder structure of your module, and optionally add the pipeline files to help with compiling the module, publishing to a repository like PowerShell Gallery and GitHub, and testing quality and style such as per the DSC Community guidelines.

Syntax

New-SampleModule -DestinationPath <String> [-ModuleType <String>] [-ModuleAuthor <String>]
  -ModuleName <String> [-ModuleDescription <String>] [-CustomRepo <String>]
  [-ModuleVersion <String>] [-LicenseType <String>] [-SourceDirectory <String>]
  [<CommonParameters>]

New-SampleModule -DestinationPath <String> [-ModuleAuthor <String>] -ModuleName <String>
  [-ModuleDescription <String>] [-CustomRepo <String>] [-ModuleVersion <String>]
  [-LicenseType <String>] [-SourceDirectory <String>] [-Features <String[]>]
  [<CommonParameters>]

Outputs

None.

Example

See section Usage.

Commands for Build Tasks

These commands are primarily meant to be used in tasks that exist either in Sampler or in third-party modules.

Refer to the comment-based help for more information about these commands.

`Convert-SamplerHashtableToString`

Convert a Hashtable to a string representation. For instance, calling the function with this hashtable:

@{a=1;b=2; c=3; d=@{dd='abcd'}}

will return:

a=1; b=2; c=3; d={dd=abcd}

Syntax

Convert-SamplerHashtableToString [[-Hashtable] <Hashtable>] [<CommonParameters>]

Outputs

[System.String]

Example

Convert-SamplerhashtableToString -Hashtable @{a=1;b=2; c=3; d=@{dd='abcd'}}

This example will return the string representation of the provided hashtable.

`Get-BuiltModuleVersion`

Will read the properties ModuleVersion and PrivateData.PSData.Prerelease tag of the module manifest for a module that has been built by Sampler. The command looks into the OutputDirectory where the project's module should have been built.

Syntax

Get-BuiltModuleVersion [-OutputDirectory] <String> [[-BuiltModuleSubdirectory] <String>]
  [-ModuleName] <String> [-VersionedOutputDirectory] [<CommonParameters>]

Outputs

[System.String]

Example

Get-BuiltModuleVersion -OutputDirectory 'output' -ProjectName 'MyModuleName'

This example will return the module version of the built module 'MyModuleName'.

`Get-ClassBasedResourceName`

This command returns all the class-based DSC resource names in a script file. The script file is parsed for classes with the [DscResource()] attribute.

Note: For MOF-based DSC resources, look at the command Get-MofSchemaName.

Syntax

Get-ClassBasedResourceName [-Path] <String> [<CommonParameters>]

Outputs

[System.String]

Example

Get-ClassBasedResourceName -Path 'source/Classes/MyDscResource.ps1'

This example will return the class-based DSC resource names in the script file MyDscResource.ps1.

Import-Module -Name 'MyResourceModule'

$module = Get-Module -Name 'MyResourceModule'

Get-ClassBasedResourceName -Path (Join-Path -Path $module.ModuleBase -ChildPath $module.RootModule)

This example will return the class-based DSC resource names in built module script file for the module named 'MyResourceModule'.

`Get-CodeCoverageThreshold`

This command returns the CodeCoverageThreshold from the build configuration (or overridden if the parameter RuntimeCodeCoverageThreshold is passed).

Syntax

Get-CodeCoverageThreshold [[-RuntimeCodeCoverageThreshold] <String>]
  [[-BuildInfo] <PSObject>] [<CommonParameters>]

Outputs

[System.Int]

Example

Get-CodeCoverageThreshold -RuntimeCodeCoverageThreshold 0

This example will override the code coverage threshold in the build configuration and return the value pass in the parameter RuntimeCodeCoverageThreshold.

`Get-MofSchemaName`

This command looks within a DSC resource's .MOF schema file to find the name and friendly name of the class.

Syntax

Get-MofSchemaName [-Path] <String> [<CommonParameters>]

Outputs

[System.Collections.Hashtable]

Property Name	Type	Description
Name	`[System.String]`	The name of class
FriendlyName	`[System.String]`	The friendly name of the class

Example

Get-MofSchemaName -Path Source/DSCResources/MyResource/MyResource.schema.mof

This example will return a hashtable containing the name and friendly name of the MOF-based resource MyResource.

`Get-OperatingSystemShortName`

This command tells what the platform is; Windows, Linux, or MacOS.

Syntax

Get-OperatingSystemShortName [<CommonParameters>]

Outputs

[System.String]

Example

Get-OperatingSystemShortName

This example will return what platform it is run on.

`Get-PesterOutputFileFileName`

This command creates a file name to be used as Pester output XML file name. The file name will be composed in the format: ${ProjectName}_v${ModuleVersion}.${OsShortName}.${PowerShellVersion}.xml

Syntax

Get-OperatingSystemShortName [<CommonParameters>]

Outputs

[System.String]

Example

Get-PesterOutputFileFileName -ProjectName 'Sampler' -ModuleVersion '0.110.4-preview001' -OsShortName 'Windows' -PowerShellVersion '5.1'

This example will return the string Sampler_v0.110.4-preview001.Windows.5.1.xml.

`Get-SamplerAbsolutePath`

This command will resolve the absolute value of a path, whether it's potentially relative to another path, relative to the current working directory, or it's provided with an absolute path.

The path does not need to exist, but the command will use the right [System.Io.Path]::DirectorySeparatorChar for the OS, and adjust the .. and . of a path by removing parts of a path when needed.

Note: When the root drive is omitted on Windows, the path is not considered absolute.

Syntax

Get-SamplerAbsolutePath [[-Path] <String>] [[-RelativeTo] <String>] [<CommonParameters>]

Outputs

[System.String]

Example

Get-SamplerAbsolutePath -Path '/src' -RelativeTo 'C:\Windows'

This example will return the string C:\src on Windows.

Get-SamplerAbsolutePath -Path 'MySubFolder' -RelativeTo '/src'

This example will return the string C:\src\MySubFolder on Windows.

`Get-SamplerBuiltModuleBase`

This command returns the module base of the built module.

Syntax

Get-SamplerBuiltModuleBase [-OutputDirectory] <String> [[-BuiltModuleSubdirectory] <String>]
  [-ModuleName] <String> [-VersionedOutputDirectory] [[-ModuleVersion] <String>]
  [<CommonParameters>]

Outputs

[System.String]

Example

Get-SamplerBuiltModuleBase -OutputDirectory 'C:\src\output' -BuiltModuleSubdirectory 'Module' -ModuleName 'stuff' -ModuleVersion '3.1.2-preview001'

This example will return the string C:\src\output\Module\stuff\3.1.2.

`Get-SamplerBuiltModuleManifest`

This command returns the path to the built module's manifest.

Syntax

Get-SamplerBuiltModuleManifest [-OutputDirectory] <String> [[-BuiltModuleSubdirectory] <String>]
  [-ModuleName] <String> [-VersionedOutputDirectory] [[-ModuleVersion] <String>] [<CommonParameters>]

Outputs

[System.String]

Example

Get-SamplerBuiltModuleManifest -OutputDirectory 'C:\src\output' -BuiltModuleSubdirectory 'Module' -ModuleName 'stuff' -ModuleVersion '3.1.2-preview001'

This example will return the string C:\src\output\Module\stuff\3.1.2\stuff.psd1.

`Get-SamplerCodeCoverageOutputFile`

This command resolves the code coverage output file path from the project's build configuration.

Syntax

Get-SamplerCodeCoverageOutputFile [-BuildInfo] <PSObject> [-PesterOutputFolder] <String>
  [<CommonParameters>]

Outputs

[System.String]

Example

Get-SamplerCodeCoverageOutputFile -BuildInfo $buildInfo -PesterOutputFolder 'C:\src\MyModule\Output\testResults'

This example will return the code coverage output file path.

`Get-SamplerCodeCoverageOutputFileEncoding`

This command resolves the code coverage output file encoding from the project's build configuration.

Syntax

Get-SamplerCodeCoverageOutputFileEncoding [-BuildInfo] <PSObject> [<CommonParameters>]

Outputs

[System.String]

Example

Get-SamplerCodeCoverageOutputFileEncoding -BuildInfo $buildInfo

This example will return the code coverage output file encoding.

`Get-SamplerModuleInfo`

This command loads a module manifest and returns the hashtable. This implementation works around the issue where Windows PowerShell has issues with the pwsh $env:PSModulePath such as in VS Code with the VS Code PowerShell extension.

Syntax

Get-SamplerModuleInfo [-ModuleManifestPath] <String> [<CommonParameters>]

Outputs

[System.Collections.Hashtable]

Example

Get-SamplerModuleInfo -ModuleManifestPath 'C:\src\MyProject\output\MyProject\MyProject.psd1'

This example will return the module manifest's hashtable.

`Get-SamplerModuleRootPath`

This command reads the module manifest (.psd1) and if the ModuleRoot property is defined it will resolve its absolute path based on the module manifest's path. If there is no ModuleRoot property defined, then this function will return $null.

Syntax

Get-SamplerModuleRootPath [-ModuleManifestPath] <String> [<CommonParameters>]

Outputs

[System.String]

Example

Get-SamplerModuleRootPath -ModuleManifestPath C:\src\MyModule\output\MyModule\2.3.4\MyModule.psd1

This example will return the path to module script file, e.g. C:\src\MyModule\output\MyModule\2.3.4\MyModule.psm1.

`Get-SamplerProjectName`

This command returns the project name based on the module manifest, if no module manifest is available it will return $null.

Syntax

Get-SamplerProjectName [-BuildRoot] <String> [<CommonParameters>]

Outputs

[System.String]

Example

Get-SamplerProjectName -BuildRoot 'C:\src\MyModule'

This example will return the project name of the module in the path C:\src\MyModule.

`Get-SamplerSourcePath`

This command returns the project's source path based on the module manifest, if no module manifest is available it will return $null.

Syntax

Get-SamplerSourcePath [-BuildRoot] <String> [<CommonParameters>]

Outputs

[System.String]

Example

Get-SamplerSourcePath -BuildRoot 'C:\src\MyModule'

This example will return the project's source path of the module in the path C:\src\MyModule.

`Merge-JaCoCoReport`

This command merges two JaCoCo reports and return the resulting merged JaCoCo report.

Note: Also see the command Update-JaCoCoStatistic.

Syntax

Merge-JaCoCoReport [-OriginalDocument] <XmlDocument> [-MergeDocument] <XmlDocument>
  [<CommonParameters>]

Outputs

[System.Xml.XmlDocument]

Example

Merge-JaCoCoReport -OriginalDocument 'C:\src\MyModule\Output\JaCoCoRun_linux.xml' -MergeDocument 'C:\src\MyModule\Output\JaCoCoRun_windows.xml'

This example will merge the JaCoCo report JaCoCoRun_windows.xml into the JaCoCo report JaCoCoRun_linux.xml and then return the resulting JaCoCo report.

`New-SamplerJaCoCoDocument`

This command creates a new JaCoCo XML document based on the provided missed and hit lines. This command is usually used together with the output object from Pester that also have been passed through ModuleBuilder's command Convert-LineNumber.

Syntax

New-SamplerJaCoCoDocument [-MissedCommands] <Object[]> [-HitCommands] <Object[]>
  [-PackageName] <String> [[-PackageDisplayName] <String>] [<CommonParameters>]

Outputs

[System.Xml.XmlDocument]

Example

# Assuming Pester 4, for Pester 5 change the commands accordingly.
$pesterObject = Invoke-Pester ./tests/unit -CodeCoverage -PassThru

$pesterObject.CodeCoverage.MissedCommands |
   Convert-LineNumber -ErrorAction 'Stop' -PassThru | Out-Null

$pesterObject.CodeCoverage.HitCommands |
   Convert-LineNumber -ErrorAction 'Stop' -PassThru | Out-Null

New-SamplerJaCoCoDocument `
   -MissedCommands $pesterObject.CodeCoverage.MissedCommands `
   -HitCommands $pesterObject.CodeCoverage.HitCommands `
   -PackageName 'source'

This example will create a new JaCoCo report based on the commands that was hit or missed from the Pester run. It will use the ModuleBuilder's command Convert-LineNumber to correlate the correct line number from the built module script file to the source script files.

New-SamplerJaCoCoDocument `
   -MissedCommands @{
         Class            = 'ResourceBase'
         Function         = 'Compare'
         HitCount         = 0
         SourceFile       = '.\Classes\001.ResourceBase.ps1'
         SourceLineNumber = 4
   } `
   -HitCommands @{
         Class            = 'ResourceBase'
         Function         = 'Compare'
         HitCount         = 2
         SourceFile       = '.\Classes\001.ResourceBase.ps1'
         SourceLineNumber = 3
   } `
   -PackageName 'source'

This example will create a new JaCoCo report based on the two hashtables containing hit or missed line.

`Out-SamplerXml`

This command outputs an XML document to the file specified in the parameter Path.

Syntax

Out-SamplerXml [-XmlDocument] <XmlDocument> [-Path] <String> [[-Encoding] <String>]
  [<CommonParameters>]

Outputs

None.

Example

Out-SamplerXml -Path 'C:\temp\my.xml' -XmlDocument '<?xml version="1.0"?><a><b /></a>' -Encoding 'UTF8'

This example will create a new XML file based on the XML document passed in the parameter XmlDocument.

`Set-SamplerTaskVariable`

This is an alias that points to a script file that is meant to be dot-sourced from (in) a build task. The script will set common task variables for a build task. This function should normally never be called outside of a build task, but an exception can be tests; tests can call the alias to set the values prior to running tests.

Note: Running the command Get-Help -Name 'Set-SamplerTaskVariable' will only return help for the alias. To see the comment-based help for the script, run:
Import-Module -Name Sampler

Get-Help -Name (Get-Alias -Name 'Set-SamplerTaskVariable').Definition -Detailed

Syntax

Set-SamplerTaskVariable [-AsNewBuild] [<CommonParameters>]

Outputs

None. Sets variables in the current PowerShell session. See comment-based help for more information about the variables that are set.

Example

. Set-SamplerTaskVariable

Call the scriptblock and tells the script to evaluate the module version by not checking after the module manifest in the built module.

. Set-SamplerTaskVariable -AsNewBuild

Call the scriptblock set script variables. The parameter AsNewBuild tells the script to skip variables that can only be set when the module has been built.

`Split-ModuleVersion`

This command parses a SemVer2 version string, and also a version string returned by a certain property of GitVersion (containing additional metadata).

Syntax

Split-ModuleVersion [[-ModuleVersion] <String>] [<CommonParameters>]

Outputs

[System.Management.Automation.PSCustomObject]

Property Name	Type	Description
Version	`[System.String]`	The module version (without prerelease string)
PreReleaseString	`[System.String]`	The prerelease string part
ModuleVersion	`[System.String]`	The full semantic version

Example

Split-ModuleVersion -ModuleVersion '1.15.0-pr0224-0022+Sha.47ae45eb2cfed02b249f239a7c55e5c71b26ab76.Date.2020-01-07'

This example will return a hashtable with the different parts of the module version for a version string that was returned by GitVersion.

`Update-JaCoCoStatistic`

This command updates statistics of a JaCoCo report. This is meant to be run after the command Merge-JaCoCoReport has been used.

Syntax

Update-JaCoCoStatistic [-Document] <XmlDocument> [<CommonParameters>]

Outputs

[System.Xml.XmlDocument]

Example

Update-JaCoCoStatistic -Document (Merge-JaCoCoReport OriginalDocument $report1 -MergeDocument $report2)

This example will return a XML document containing the JaCoCo report with the updated statistics.

Build Task Variables

A task variable is used in a build task and it can be added as a script parameter to build.ps1 or set as as an environment variable. It can often be used if defined in parent scope or read from the $BuildInfo properties defined in the configuration file.

`BuildModuleOutput`

This is the path where the module will be built. The path will, for example, be used for the parameter OutputDirectory when calling the cmdlet Build-Module of the PowerShell module Invoke-Build. Defaults to the path for OutputDirectory, and concatenated with BuiltModuleSubdirectory if it is set.

`BuiltModuleSubdirectory`

An optional path that will suffix the OutputDirectory to build the default path in variable BuildModuleOutput.

`ModuleVersion`

The module version of the built module. Defaults to the property NuGetVersionV2 returned by the executable gitversion, or if the executable gitversion is not available the the variable defaults to an empty string, and the build module task will use the version found in the Module Manifest.

It is also possible to set the session environment variable $env:ModuleVersion in the PowerShell session or set the variable $ModuleVersion in the PowerShell session (the parent scope to Invoke-Build) before running the task build

This ModuleVersion task variable can be overridden by using the key SemVer in the file build.yml, e.g. SemVer: '99.0.0-preview1'. This can be used if the preferred method of using GitVersion is not available.

The order that the module version is determined is as follows:

the parameter ModuleVersion is set from the command line (passing parameter to build task)
if no parameter was passed it defaults to using the property from the environment variable $env:ModuleVersion or parent scope variable $ModuleVersion
if the ModuleVersion is still not found it will try to use GitVersion if it is available
if GitVersion is not available the module version is set from the module manifest in the source path using the properties ModuleVersion and PrivateData.PSData.Prerelease
if module version is set using key SemVer in build.yml it will override 1), 2), 3), and 4)
~~if SemVar is set through parameter from the command line then it will~~ ~~override 1), 2), 3), 4), and 5)~~. This is not yet supported.

`OutputDirectory`

The base directory of all output from the build tasks. This is the path where artifacts will be built or saved such as the built module, required modules downloaded at build time, test results, etc. This folder should be ignored by git as its content is ephemeral. It defaults to the folder 'output', a path relative to the root of the repository (same as Invoke-Build's $BuildRoot). You can override this setting with an absolute path should you need to.

`ProjectPath`

The root path to the project. Defaults to $BuildRoot.

`ProjectName`

The project name. Defaults to the BaseName of the module manifest it finds in either the folder 'source', 'src, or a folder with the same name as the module.

`ReleaseNotesPath`

THe path to the release notes markdown file. Defaults to the path for OutputDirectory concatenated with ReleaseNotes.md.

`SourcePath`

The path to the source folder. Defaults to the same path where the module manifest is found in either the folder 'source', 'src', or a folder with the same name as the module.

Tasks

`Create_Changelog_Branch`

This build task creates pushes a branch with the changelog updated with the current release version.

This is an example of how to use the task in the azure-pipelines.yml file:

- task: PowerShell@2
  name: sendChangelogPR
  displayName: 'Send Changelog PR'
  inputs:
    filePath: './build.ps1'
    arguments: '-tasks Create_Changelog_Branch'
    pwsh: true
  env:
    MainGitBranch: 'main'
    BasicAuthPAT: $(BASICAUTHPAT)

This can be use in conjunction with the Create_Release_Git_Tag task that creates the release tag.

  publish:
    - Create_Release_Git_Tag
    - Create_Changelog_Branch

Task parameters

Some task parameters are vital for the resource to work. See comment based help for the description for each available parameter. Below is the most important.

Task configuration

The build configuration (build.yaml) can be used to control the behavior of the build task.

####################################################
#             Changelog Configuration              #
####################################################
ChangelogConfig:
  FilesToAdd:
    - 'CHANGELOG.md'
  UpdateChangelogOnPrerelease: false

####################################################
#                Git Configuration                 #
####################################################
GitConfig:
  UserName: bot
  UserEmail: bot@company.local

Section ChangelogConfig

Property FilesToAdd

This specifies one or more files to add to the commit when creating the PR branch. If left out it will default to the one file CHANGELOG.md.

Property UpdateChangelogOnPrerelease

true: Always create a changelog PR, even on preview releases.
false: Only create a changelog PR for full releases. Default.

Section GitConfig

This configures git. user name and e-mail address of the user before task pushes the tag.

Property UserName

User name of the user that should push the tag.

Property UserEmail

E-mail address of the user that should push the tag.

`Create_Release_Git_Tag`

This build task creates and pushes a preview release tag to the default branch.

Note: This task is primarily meant to be used for SCM's that does not have releases that connects to tags like GitHub does with GitHub Releases, but this task can also be used as an alternative when using GitHub as SCM.

This is an example of how to use the task in the build.yaml file:

  publish:
    - Create_Release_Git_Tag

Task parameters

Some task parameters are vital for the resource to work. See comment based help for the description for each available parameter. Below is the most important.

Task configuration

The build configuration (build.yaml) can be used to control the behavior of the build task.

####################################################
#                Git Configuration                 #
####################################################
GitConfig:
  UserName: bot
  UserEmail: bot@company.local

Section GitConfig

This configures git. user name and e-mail address of the user before task pushes the tag.

Property UserName

User name of the user that should push the tag.

Property UserEmail

E-mail address of the user that should push the tag.

`Set_PSModulePath`

This task sets the PSModulePath according to the configuration in the build.yml file.

This task can be important when compiling DSC resource modules or DSC composite resource modules. When a DSC resource module is available in 'Program Files' and the Required Modules folder, DSC sees this as a conflict.

Note: The paths $BuiltModuleSubdirectory and $RequiredModulesDirectory are always prepended to the PSModulePath.

This sequence sets the PSModulePath before starting the tests.

  test:
    - Set_PSModulePath
    - Pester_Tests_Stop_On_Fail
    - Pester_If_Code_Coverage_Under_Threshold

Task parameters

Some task parameters are vital for the resource to work. See comment based help for the description for each available parameter. Below is the most important.

Task configuration

The build configuration (build.yaml) can be used to control the behavior of the build task.

####################################################
#           Setting Sampler PSModulePath           #
####################################################
SetPSModulePath:
  PSModulePath: C:\Users\Install\OneDrive\Documents\WindowsPowerShell\Modules;C:\Program Files\WindowsPowerShell\Modules;C:\Windows\system32\WindowsPowerShell\v1.0\Modules;c:\Users\Install\.vscode\extensions\ms-vscode.powershell-2022.5.1\modules;
  RemovePersonal: false
  RemoveProgramFiles: false
  RemoveWindows: false
  SetSystemDefault: false

The PSModulePath parameter can access variables and contain sub-expressions.

####################################################
#           Setting Sampler PSModulePath           #
####################################################
SetPSModulePath:
  PSModulePath: $ProjectPath\.temp\Microsoft Azure AD Sync\Bin;$([System.Environment]::GetFolderPath('ProgramFiles'))\WindowsPowerShell\Modules;$([System.Environment]::GetFolderPath('System'))\WindowsPowerShell\v1.0\Modules
  RemovePersonal: false
  RemoveProgramFiles: false
  RemoveWindows: false
  SetSystemDefault: false

Section SetPSModulePath

Property PSModulePath

Sets the PSModulePath to the specified value. This string is treated like an expandable string and can access variables and contain sub-expressions.

Property RemovePersonal

Removed the personal path from PSModulePath, like C:\Users\Install\Documents\WindowsPowerShell\Modules.

Section RemoveProgramFiles

Removed the 'Program Files' path from PSModulePath, like C:\Program Files\WindowsPowerShell\Modules.

Property RemoveWindows

Removed the Windows path from PSModulePath, like C:\Windows\system32\WindowsPowerShell\v1.0\Modules.

Note: It is not recommended to remove the Windows path from PSModulePath.

Property SetSystemDefault

Sets the module path to what is defined for the machine. The machines PSModulePath is retrieved with this call:

[System.Environment]::GetEnvironmentVariable('PSModulePath', 'Machine')

Files

README.md

Latest commit

History

README.md

File metadata and controls

Sampler Module

Prerequisites

Resolving dependencies

PSResourceGet

ModuleFast

PowerShellGet & PSDepend

Managing the Module versions (optional)

Usage

How to create a new project

SimpleModule

SimpleModule_NoBuild

CompleteSample

dsccommunity

CustomModule

GCPackage

How to work with the multi-module repository

How to download dependencies for the project

How to build the project

How to set up the build environment in the current PowerShell session

How to run tests

How to run the default workflow

How to list all available tasks

About the bootstrap process (build.ps1)

About Sampler build workflow

Default Workflow Currently configured

GCPackage scaffolding

Commands

Add-Sample

Syntax

Outputs

Example

Invoke-SamplerGit

Syntax

Outputs

Example

New-SampleModule

Syntax

Outputs

Example

Commands for Build Tasks

Convert-SamplerHashtableToString

Syntax

Outputs

Example

Get-BuiltModuleVersion

Syntax

Outputs

Example

Get-ClassBasedResourceName

Syntax

Outputs

Example

Get-CodeCoverageThreshold

Syntax

Outputs

Example

Get-MofSchemaName

Syntax

Outputs

Example

Get-OperatingSystemShortName

Syntax

Outputs

Example

Get-PesterOutputFileFileName

Syntax

Outputs

Example

Get-SamplerAbsolutePath

Syntax

Outputs

Example

Get-SamplerBuiltModuleBase

Syntax

`SimpleModule`

`SimpleModule_NoBuild`

`CompleteSample`

`dsccommunity`

`CustomModule`

`GCPackage`

About the bootstrap process (`build.ps1`)

`Add-Sample`

`Invoke-SamplerGit`

`New-SampleModule`

`Convert-SamplerHashtableToString`

`Get-BuiltModuleVersion`

`Get-ClassBasedResourceName`

`Get-CodeCoverageThreshold`

`Get-MofSchemaName`

`Get-OperatingSystemShortName`

`Get-PesterOutputFileFileName`

`Get-SamplerAbsolutePath`

`Get-SamplerBuiltModuleBase`

`Get-SamplerBuiltModuleManifest`

`Get-SamplerCodeCoverageOutputFile`

`Get-SamplerCodeCoverageOutputFileEncoding`

`Get-SamplerModuleInfo`

`Get-SamplerModuleRootPath`

`Get-SamplerProjectName`

`Get-SamplerSourcePath`

`Merge-JaCoCoReport`

`New-SamplerJaCoCoDocument`

`Out-SamplerXml`

`Set-SamplerTaskVariable`

`Split-ModuleVersion`

`Update-JaCoCoStatistic`

`BuildModuleOutput`

`BuiltModuleSubdirectory`

`ModuleVersion`

`OutputDirectory`

`ProjectPath`

`ProjectName`

`ReleaseNotesPath`

`SourcePath`